Használati útmutató Wyse - Dell VX0

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wyse - Dell VX0 (3 oldal) a Monitor kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/3
Model VX0 Mounting Bracket
Installation Instructions
The mounting bracket can be mounted vertically on a wall or horizontally under most
desks. The bracket can be mounted with the power supply holder either in the up or down
position when vertical or on the left or right when horizontal, for a total of four available
mounting positions. The thin client can be inserted with either the power button positioned
towards the top or to the right. Cables can be attached at any convenient time, as long as
the power is disconnected. The mounting bracket must be mounted vertically or
horizontally using four (4) user-provided #10 screws into a sturdy support such as a wall
brace or solid desk.
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
Use the following instructions to mount the thin client.
1. Remove thumb screw from the vertical foot base, slide foot toward the back panel and
remove the foot.
2. Use the mounting bracket as a template to mark the positions of the mounting holes.
Notes
When determining location, take into account the cable lengths of the
monitor, keyboard, mouse, power supply, and peripherals.
For thin client cooling requirements, position the thin client so that the power
button to the thin client is on the top when installing in the vertical position
and to the right facing you when installing in the horizontal position under a
desk.
Mount the thin client only as indicated; improper orientation (where the back
panel or front panel is facing down) could inhibit the dissipation of heat from
the device and damage it.
Leave at least 12.5 mm between the ventilation holes of the thin client and
any solid surface. An enclosed area must have a minimum of 150 square cm
of venting or other open area to maintain proper ventilation of the thin client.
.
2
3
3. Install the user-provided wall anchors. Any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
4. Mount the bracket with four (4) user-provided #10 screws and snug the screws to hold
the mounting bracket firmly in place (don’t overtighten)
5. Slide the back panel end of the thin client into the mounting bracket until it snaps twice
into place.
6. Attach the power adapter box to the wall bracket using the two (2) M3x8 mm screws
provided and slide or rotate the thin client’s power adapter into the power adapter box.
Note
For power source convenience, you can attach the power adapter box to
either end of the wall bracket.
7. Attach the cables to their respective connectors on the back panel of the thin client.
8. Optional: gather the cables together and with a user-provided tie wrap, secure to a
pre-drilled cable management tie hole (any unused hole provided) of the mounting
bracket.
Note
Attach the tie wrap in a security tie hole where it will not obstruct connectors,
power button, or other working parts of the thin client.
883863-01 Rev. A
March 2005

Termékspecifikációk

Márka: Wyse - Dell
Kategória: Monitor
Modell: VX0

Szüksége van segítségre?

Ha segítségre van szüksége Wyse - Dell VX0, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor Wyse - Dell

Wyse - Dell

Wyse - Dell VX0 Útmutató

22 Augusztus 2024
Wyse - Dell

Wyse - Dell CX0LE Útmutató

22 Augusztus 2024
Wyse - Dell

Wyse - Dell VX0LE Útmutató

22 Augusztus 2024

Útmutatók Monitor

Legújabb útmutatók Monitor

Philips

Philips 32B1U3900 Útmutató

12 December 2024
Philips

Philips 32B1N3800 Útmutató

12 December 2024
Dell

Dell SE2722HX Útmutató

11 December 2024
Dell

Dell C1422H Útmutató

11 December 2024
Dell

Dell S2722DZ Útmutató

11 December 2024
Dell

Dell C2423H Útmutató

11 December 2024
Dell

Dell P190s Útmutató

11 December 2024
Dell

Dell E170S Útmutató

11 December 2024