Használati útmutató Wyse - Dell VX0LE

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wyse - Dell VX0LE (4 oldal) a Monitor kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
Wyse VX0L/LE Dual VESA Mount
Installation Instructions
The bracket enables a Wyse VX0L or VX0LE thin client to be mounted to a wall or on most
VESA compliant mounting surfaces and monitors. Both VESA 75 mm and 100 mm
mounting patterns are supported. The mounting bracket consists of two (2) pieces. The
larger bracket piece attaches to the mounting surface using the VESA mounting patterns.
User-provided hardware must be used that can withstand a force of 25 pounds (11.35
kilograms). The thin client is inserted in an upright position and cables are attached. The
smaller bracket piece attaches to the VESA compliant mounting monitor. The two bracket
pieces are then joined with four (4) thumb screws.
Notes
When determining location, take into account the cable lengths of the
monitor, keyboard, mouse, power supply, and peripherals.
Mount the thin client only as indicated; improper orientation (where the back
panel or front panel is facing down) could inhibit the dissipation of heat from
the device and damage it.
Do not enclosed the thin client in a confined environment without proper
ventilation. If you have questions, contact the Wyse Sustaining Engineering
Group.
2
Use the following instructions to mount the thin client:
1. Attach the larger bracket to the mounting surface (a swing arm mount is shown). The
mounting surface can have either the VESA 75 mm or 100 mm mounting pattern. The
bracket should be placed upright as shown. Secure the bracket with proper
user-provided hardware that can withstand a force of 25 pounds (11.35 kilograms).
Note
If installing on a hollow wall, any standard anchoring method may be used,
such as screws, butterfly anchors, or expansion bolts.
2. Slide the thin client into the mounted bracket using the pre-assembled guide rails until
it clicks into place.
3
3. Place the power adapter in the side pocket.
Note
If you have mounted the bracket to a wall, now is most convenient time to
attach all desired connections to the thin client.
4. Position the smaller bracket on the monitor as shown to match a set of mounting holes.
Both VESA 75 mm and 100 mm mounting patterns are supported. The bracket should
be placed with the turned edge on top (pointing downward). Secure with four (4)
user-provided screws (do not overtighten).
Note
If you have mounted the thin client bracket to a wall, now is most convenient
time to attach all desired connections to the monitor before assembling the
two brackets pieces together.

Termékspecifikációk

Márka: Wyse - Dell
Kategória: Monitor
Modell: VX0LE

Szüksége van segítségre?

Ha segítségre van szüksége Wyse - Dell VX0LE, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Monitor Wyse - Dell

Wyse - Dell

Wyse - Dell VX0 Útmutató

22 Augusztus 2024
Wyse - Dell

Wyse - Dell CX0LE Útmutató

22 Augusztus 2024
Wyse - Dell

Wyse - Dell VX0LE Útmutató

22 Augusztus 2024

Útmutatók Monitor

Legújabb útmutatók Monitor

Philips

Philips 32B1U3900 Útmutató

12 December 2024
Philips

Philips 32B1N3800 Útmutató

12 December 2024
Dell

Dell SE2722HX Útmutató

11 December 2024
Dell

Dell C1422H Útmutató

11 December 2024
Dell

Dell S2722DZ Útmutató

11 December 2024
Dell

Dell C2423H Útmutató

11 December 2024
Dell

Dell P190s Útmutató

11 December 2024
Dell

Dell E170S Útmutató

11 December 2024