Használati útmutató Toshiba RAS-15LKV-UL

Toshiba légkondicionáló RAS-15LKV-UL

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Toshiba RAS-15LKV-UL (12 oldal) a légkondicionáló kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/12

1110650133-1

OWNER’S MANUAL

ENGLISH

ESPAÑOL

FRANÇAIS

AIR CONDITIONER (SPLIT TYPE)

For general public use

Indoor unit

RAS-09, 12, 15, 17, 22LKV-UL Series

Outdoor unit

RAS-09, 12, 15, 17, 22LAV-UL Series

1110650133-1-EN.indd 1

1110650133-1-EN.indd 11110650133-1-EN.indd 1 1/4/10 3:50:51 PM

1/4/10 3:50:51 PM

1/4/10 3:50:51 PM1/4/10 3:50:51 PM

PRECAUTIONS FOR SAFETY

DANGER

• Do not install, repair, open or remove the cover. It may expose you

to dangerous voltages. Ask trained, qualiﬁ ed installers and service

mechanics to do this.

• Turning off the power supply will not prevent potential electric shock.

• The appliance shall be installed in accordance with national wiring

regulation.

• Means for disconnection from the supply having a contact separation of at

least 1/8 in. (3 mm) in all poles must be incorporated in the ﬁ xed wiring.

WARNING

• Do not expose your body directly to cool air for a long time.

• Do not insert your ﬁ nger or any article into the air inlet/outlet.

• When an abnormality (burning smell, etc.) occurs, stop the air conditioner

and turn oﬀ the circuit breaker.

• Installation must be requested from trained, qualiﬁ ed installers and service

mechanics. Installation requires special knowledge and skill. If customers

install on their own, it can be a cause of ﬁ re, electric shock, injury or water

leakage.

• Do not select a location for installation where ﬂ ammable gas may leak. If

there is any gas leakage or accumulation around the unit, it can be a cause

of ﬁ re.

• Do not turn ON/OFF the circuit breaker or operate buttons with a wet hand.

It may be a cause of electric shock.

• Do not disassemble, modify or relocate the unit by yourself. It may become

the cause of ﬁ re, electric shock, or water leakage. For repair or relocation,

please request service from trained, qualiﬁ ed installers and service

mechanics.

• Do not select a location for installation where there may be excessive

water or humidity, such as a bathroom. Deterioration of insulation may be a

cause of electric shock or ﬁ re.

• When relocating or repairing the unit, please contact trained, qualiﬁ ed

installers and service mechanics. When there is a kink in the wiring, it may

be the cause of electric shock or ﬁ re.

• During an error (such as a burning odor, not cooling, or not warming), stop

operating the unit and turn oﬀ the circuit breaker. Continuous operation

may be a cause of ﬁ re, or electric shock. Please request repair or service

from trained, qualiﬁ ed installers and service mechanics.

• Earth work should be requested from trained, qualiﬁ ed installers and

service mechanics. Insufﬁ cient grounding work may be the cause of

electric shock. Do not connect the earth wire to a gas pipe, water pipe,

lightning conductor, or telephone earth wire.

• If the indoor unit piping outlet is exposed due to relocation, close the

opening. Touching internal electrical parts may cause injury or electric

shock.

• Do not insert any material (metal, paper, or water, etc) into the air outlet or

air intake opening. Fan may be rotating at high speed inside or there are

high voltage sections, which may cause an injury or electric shock.

• You must use a independent power outlet for the power supply. If a power

outlet other than the independent outlet is used, it may cause a ﬁ re.

• When the air-conditioning unit does not cool or warm, there may be a

leakage of refrigerant. Please consult trained, qualiﬁ ed installers and

service mechanics. The refrigerant used in the air-conditioning unit is safe.

It will not leak under normal operating conditions but if it leaks into the

room and contacts a heat source such as a heater, or stove, it may cause a

harmful reaction.

• When water or other foreign substances enter the internal parts, stop

operating the unit immediately and turn oﬀ the circuit breaker. Operating

the unit continuously may cause ﬁ re or electric shock. Please contact

trained, qualiﬁ ed installers and service mechanics for repair.

• Do not clean the inside of the air-conditioning unit yourself. Please request

internal cleaning of the air-conditioning unit from trained, qualiﬁ ed installers

and service mechanics. Incorrect cleaning may cause breakage of resin

parts or insulation defects of electrical parts, causing water leakage,

electric shock or ﬁ re.

• Do not damage or modify the power cable. Do not connect the cable

midway, or use a multiple outlet extension cord that is shared by other

devices. Failure to do so may cause ﬁ re.

• Do not place heavy objects on the power cable, expose it to heat, or pull it.

To do so may cause electrical shock or ﬁ re.

• This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the

appliance.

CAUTION

• Check that the circuit breaker is installed correctly. If the circuit breaker

is not properly installed, it may cause an electric shock. To check the

installation method, please contact trained, qualiﬁ ed installers and service

mechanics.

• When using the unit in a closed room, or operating with other combustion

appliances, make sure to open a window occasionally for ventilation.

Insufﬁ cient ventilation may cause suffocation due to a lack of oxygen.

• Avoid operating for long periods in a high humidity environment (over 80%)

such as with the windows or doors open. There may be condensation on

the indoor unit and droplets may fall onto the furniture.

• When the unit won’t be used for a long time, turn oﬀ the main switch or the

circuit breaker.

• It is recommended that maintenance be performed by trained, qualiﬁ ed

installers and service mechanics when the unit has been operated for a

long time.

• At least once a year check if the mounting table of the outdoor unit is

damaged or not. If a damaged state is ignored, the unit may fall or over-

turn, causing an injury.

• Stand on a sturdy ladder when attaching/detaching the front panel/air

ﬁ lter/air cleaning ﬁ lter. Failure to do so may cause a fall or injury.

• Do not stand on the outdoor unit or place anything on the unit. It may be

the cause of injury due to falling or over-turning. Any damage to the unit

may cause an electric shock or ﬁ re.

• Do not use combustion appliances in the direct ﬂ ow of the air from the air-

conditioning unit. Poor combustion of a combustion appliance may cause

suﬀocation.

• Do not place anything around the outdoor unit or allow fallen leaves to

accumulate around it. If there are fallen leaves, small animals could enter

and contact internal electrical parts, causing a failure or ﬁ re.

• Do not place animals and plants in places where wind from the air-

conditioning unit ﬂ ows directly. It may have a negative inﬂ uence on the

animal or plant.

• Ensure that drained water is discharged. When the discharging water

process is not sufﬁ cient, water may leak, causing water damage to

furniture. To check that the installation method used is correct, please

contact the supplying retail dealership or the professional vendor who

installed the unit.

• Do not place any containers such as a vase containing ﬂ uid on the unit. It

might cause water to enter the unit and deteriorate the electrical insulation,

causing an electric shock.

• Do not use it as special applications such as storage of food or animals,

or to display plants, precision devices, or art objects. Do not use on ships

or in other vehicles. It may cause a failure in the air-conditioning unit. In

addition, it may damage these items.

• Do not place other electrical appliances or furniture under the unit. Water

droplets might fall, causing damage or failure.

• When cleaning ﬁ lters, you must stop operating the unit and turn off the

circuit breaker. Since the fan inside may be rotating at high speed, it may

cause an injury.

• Do not wash the main air-conditioning unit with water. It may cause an

electric shock.

• After the front panel/air ﬁ lter is cleaned, wipe away any water and allow to

dry. If water remains, it may cause an electric shock.

• Once the front panel is removed, do not touch the metal parts of the unit. It

may cause an injury.

• Do not touch the air intake section or the aluminum ﬁ ns of the unit. It may

cause injury.

• When you hear thunder and there might be a lightning strike, stop

operating the unit and disconnect the circuit breaker. If lightning strikes, it

may cause a failure.

• Batteries for remote control unit:

- Should be inserted with correct polarity (+) and (-).

- Should not be recharged.

- Do not use batteries for which the “Recommended usage period” has

expired.

- Do not keep used batteries inside the remote control unit.

- Do not mix different types of batteries, or mix new batteries with old ones.

- Do not directly solder the batteries.

- Do not short-circuit, disassemble, heat, or throw batteries into a fire. If

batteries are not disposed of correctly, they may burst or be the cause

of fluid leakage, resulting in burns or injuries. If touching the fluid, wash

thoroughly with water. If it touches devices, wipe off to avoid direct

contact.

- Do not place within reach of small children. If a battery is swallowed,

consult a doctor immediately.

1110650133-1-EN.indd 2

1110650133-1-EN.indd 21110650133-1-EN.indd 2 1/4/10 3:50:57 PM

1/4/10 3:50:57 PM

1/4/10 3:50:57 PM1/4/10 3:50:57 PM

INDOOR UNIT DISPLAY

1 Hi POWER (Green)

2 FILTER (Orange)

3 PRE. DEF (Preheat/Defrost)

(Orange)

4 TIMER (Yellow)

5 OPERATION (Green)

6 RESET button

Press

FIX

: Move the louver to the

desired vertical direction.

Press

SWING

: To continuously swing

the louver automatically and press

again to stop.

For horizontal direction, adjust

manually.

AIR FLOW DIRECTION

Note:

• Do not move the louver manually by others.

• The louver may automation positioning by some operation mode.

ONE-TOUCH

AUTOMATIC OPERATION

To automatically select cooling, heating, or fan only operation

1. Press

MODE

: Select A.

2. Press

TEMP

: Set the desired temperature.

Press the “ONE-TOUCH” button for fully automated operation that is

customized to the typical consumer preferences in your region of the world.

The customized settings control temperature air ﬂ ow strength, air ﬂ ow

direction and other settings to provide you alternate contact with “ONE-

TOUCH” of the button. If you prefer other settings you can select from the

many other operating functions of your unit.

Press

ONE-TOUCH

: Start the operation.

REMOTE CONTROL

PREPARATION BEFORE USE

Preparing Filters

1. Open the air inlet grille and remove the air ﬁ lters.

2. Attach the ﬁ lters. (see detail in the accessory sheet).

Loading Batteries

1. Remove the battery cover.

2. Insert 2 new batteries (AAA type)

following the (+) and (–) positions.

Clock Setup

1. Push CLOCK by tip of the pencil.

If timer indication is ﬂ ashing, go to the next step 2.

2. Press ON or OFF : adjust the time.

3. Press SET : Set the time.

Temperature Unit °F-°C Selection

1. Push and hold CHK button on the Remote

Control by the tip of the pencil, “00” will be

shown on the display.

2. Press

SLEEP

while pushing CHK .

Note: 1. Repeat above step to reset Remote

Control to be °F.

2. Operation mode and temperature

set will reset to initial setting after

change the temperature unit.

3. Default setting of Remote Control

from factory is °F.

ACL

PRESET

ONE-TOUCH

QUIET

SWING

TIMER

FILTER

CHK

˚C/˚F

CLOCK

OFF

CLR

SLEEP

SET

FIX Hi-POWER ECO

COMFORT

SLEEP

MODE

TEMP

FAN

1 Infrared signal emitter

2 Start/Stop button

3 Mode select button (MODE)

4 Temperature button (TEMP)

5 Fan speed button (FAN)

6 Swing louver button

(SWING)

7 Set louver button (FIX)

8 On timer button (ON)

9 Oﬀ timer button (OFF)

! Sleep timer button (SLEEP)

" Setup button (SET)

# Clear button (CLR)

$ Memory and Preset button

(PRESET)

% One-Touch button

(ONE-TOUCH)

& High power button

(Hi-POWER)

( Economy button (ECO)

) Quiet button (QUIET)

~ Comfort sleep button

(COMFORT SLEEP)

+ Filter reset button (FILTER)

, Clock Reset button (CLOCK)

- Check button (CHK)

REMOTE CONTROL A-B SELECTION

To separate using of remote control for each indoor unit in case of 2 air

conditioners are installed adjacent to each other.

Remote Control B Setup.

1. Press RESET button on the indoor unit to turn the air conditioner ON.

2. Point the remote control at the indoor unit.

3. Push and hold CHK button on the Remote Control by the tip of the

pencil. “00” will be shown on the display.

4. Press

MODE

while pushing CHK . “B” will show on the display and “00”

will disappear and the air conditioner will turn OFF. The Remote Control

B is memorized.

Note: 1. Repeat above step to reset Remote Control back to A.

2. Remote Control A have not “A” display.

3. Default setting of Remote Control from

factory is A.

SYSTEM CHARACTERISTICS

1. Three-minute time delay: To protect against frequent compressor starts.

2. Preheating operation: Warm up the unit for several minutes before

blowing warm air.

3. Warm air control: When the room temperature reaches the set

temperature, the fan speed is automatically reduced and the outdoor unit

will stop.

4. Automatic defrosting: Fans will stop during defrost operation.

5. Heating capacity: Heat is absorbed from outdoor and released into

the room. When the outdoor temperature is too low, use another

recommended heating apparatus in combination with the air conditioner.

6. Some minor cracking sound may occur when unit operating. This is

normal and is caused by expansion/contraction of plastic.

Item 2 to 5 for Heating modelNote:

Air conditioner operating conditions

Temp.

Operation

Outdoor Temperature Room

Temperature

Heating 5°F ~ 75°F (–15°C ~ 24°C) Less than 82°F (28°C)

Cooling 14°F ~ 115°F (–10°C ~ 46°C) 70°F ~ 90°F (21°C ~ 32°C)

Dry 14°F ~ 115°F (–10°C ~ 46°C) 62°F ~ 90°F (17°C ~ 32°C)

CLR

SLEEP

SET

“B” Display

“00” Display

1110650133-1-EN.indd 3

1110650133-1-EN.indd 31110650133-1-EN.indd 3 1/4/10 3:50:57 PM

1/4/10 3:50:57 PM

1/4/10 3:50:57 PM1/4/10 3:50:57 PM

Termékspecifikációk

Márka:	Toshiba
Kategória:	légkondicionáló
Modell:	RAS-15LKV-UL

Szüksége van segítségre?

Ha segítségre van szüksége Toshiba RAS-15LKV-UL, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók légkondicionáló Toshiba

Toshiba RAS-B10SKVP-E Útmutató

16 Január 2025

Toshiba RAS-13SKV Útmutató

16 Január 2025

Toshiba RAS-15LKV-UL Útmutató

16 Január 2025

Toshiba MCY-MAP0501HT Útmutató

13 Október 2024

Toshiba RAS-25G2AVP-ND Útmutató

4 Október 2024

Toshiba MCY-MAP0401HT Útmutató

23 Szeptember 2024

Toshiba RAS-12SKVP-ND Útmutató

15 Szeptember 2024

Toshiba RAS-34E2KVG-A Útmutató

28 Augusztus 2024

Toshiba RAS-07E2KV2G-A Útmutató

28 Augusztus 2024

Toshiba RAS-22E2KV2G-A Útmutató

28 Augusztus 2024

Útmutatók légkondicionáló

Legújabb útmutatók légkondicionáló

ARGO Crono Útmutató

16 Január 2025

Honeywell CO25MM Útmutató

16 Január 2025

Gree CE52-24/F(C) Útmutató

16 Január 2025

Daikin RXM50A5V1B8 Útmutató

16 Január 2025

Daikin RXP50N5V1B8 Útmutató

16 Január 2025

Midea MSEPB-25CRFN8 Útmutató

16 Január 2025

Whirlpool AMD 052 Útmutató

15 Január 2025

Maxicool SGL 18COC Útmutató

15 Január 2025

Honeywell MN09CESWW Útmutató

15 Január 2025

Frigidaire FAA082P7A Útmutató

15 Január 2025