Használati útmutató Sherwood AX-4103
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sherwood AX-4103 (14 oldal) a Erősítő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/14
VOLUME
ST ANDB Y
PHONES
SPEAKERA B
T UNER CD T APE T V/AUX VCR T ONE DIRECT
BALANCET ONE
REMOTE
SENSOR
POWER
STE RE O INTEGRATE D AMPL IFIER
AX-4103
DISCRETE AMPLIFIER STAGE
D A S
AX-4103
STEREO INTEGRATED AMPLIFIER
INTEGRIERTER STEREO VOR-/ENDVERSTARKER
OPERATINGINSTRUCTIONS
BEDIENUNGSANLEITUNG
2
Introduction
Congratulations on Your Purchase!
Your new high fidelity amplifier is designed to deliver
maximum enjoyment and years of trouble free service.
Please take a few moments to read this manual
thoroughly. It will explain the features and operation of
your unit and help ensure a trouble free installation.
Please unpack your unit carefully. We recommend that
you save the carton and packing material. They will be
helpful if you ever need to move your unit and may be
required if you ever need to return it for service. Your unit
is designed to be placed in a horizontal position and it is
important to allow at least two inches of space behind
your unit for adequate ventilation and cabling
convenience.
To avoid damage, never place the unit near radiators, in
front of heating vents, in direct sunlight, or in excessively
humid or dusty locations. Connect your complementary
components as illustrated in the following section.
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol is intended to alert the user to the
presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
Caution : Do not block ventilation openings or stack
other equipment on the top.
FOR U.S.A
FCC INFORMATION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and amplifier.
Connect the equipment into an outlet on a circuit
different from that to which the amplifier is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modifications in
construction of this device which are not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
WARNING
UNPACKING AND INSTALLATION
Caution regarding placement
(Except for U.S.A. and Canada)
To maintain proper ventilation, be sure
to leave a space around the unit (from
the largest outer dimensions including projections)
equal to, or greater than, shown below.
Left and right panels: 5 cm
Rear panel: 10 cm
Top panel: 20 cm
ENGLISH
FOR U.S.A AND CANADA .................................. 120 V
Units shipped to the U.S.A and Canada are designed
for operation on 120 V AC only.
Safety precaution with use of a polarized AC plug.
However, some products may be supplied with a
nonpolarized plug.
CAUTION : To prevent electric shock, match wide
blade of plug to wide slot, fully insert.
ATTENTION : Pour eviter les choc electriques,
introduire la lame la plug large de la borne
correspondante de la prise et poussre jusqu’au
fond.
FOR YOUR SAFETY
FOR CHINA, EUROPE AND AUSTRALIA 220V/230V/240V........
Units shipped to China are designed for operation on
220 V AC only.
Units shipped to Australia are designed for operation
on 240 V AC only.
To ensure safe operation, the three-pin plug supplied
must be inserted only into a standard three-pin
power point which is effectively earthed through the
normal household wiring. Extension cords used with
the equipment must be three-core and be correctly
wired to provide connection to earth.
Improper extension cords are a major cause of
fatalities. The fact that the equipment operates
satisfactorily does not imply that the power point is
earthed and that the installation is completely safe.
For your safety, if in any doubt about the effective
earthing of the power point, consult a qualified
electrician.
PAN-EUROPEAN UNIFIED VOLTAGE
All units are suitable for use on supplies 230-240 V
AC.
FOR YOUR SAFETY
3
READ THIS BEFORE OPERATING YOUR UNIT
FOR OTHER COUNTRIES ........................ 115 V/230 V
Units shipped to countries other than the above
countries are equipped with an AC voltage selector
switch on the rear panel. Refer to the following
paragraph for the proper setting of this switch.
AC VOLTAGE SELECTION
This unit operates on 115/230 V AC. The AC voltage
selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped.
Before connecting the power cord to your AC outlet,
make sure that the setting position of this switch
matches your line voltage. If not, it must be set to
your voltage in accordance with the following
direction.
AC voltage selector switch
Move switch lever to match your line voltage with a
small screwdriver or other pointed tool.
FOR YOUR SAFETY
AC 230 V AC 115 V
ENGLISH
Termékspecifikációk
| Márka: | Sherwood |
| Kategória: | Erősítő |
| Modell: | AX-4103 |
Szüksége van segítségre?
Ha segítségre van szüksége Sherwood AX-4103, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Erősítő Sherwood
10 Augusztus 2024
28 Július 2024
Útmutatók Erősítő
- Erősítő Yamaha
- Erősítő Marantz
- Erősítő Pioneer
- Erősítő Hifonics
- Erősítő Geemarc
- Erősítő DAP-Audio
- Erősítő Eden
- Erősítő Naim
- Erősítő Power Dynamics
- Erősítő Denon
- Erősítő Hartke
- Erősítő Auna
- Erősítő Marshall
- Erősítő Teac
- Erősítő Monacor
- Erősítő NAD
- Erősítő IRiver
- Erősítő Vonyx
- Erősítő Fenton
- Erősítő Pyle
- Erősítő Rotel
- Erősítő AKG
- Erősítő IFi Audio
- Erősítő Arcam
- Erősítő Advance Acoustic
- Erősítő UPC
- Erősítő Ampeg
- Erősítő American Audio
- Erősítő Sansui
- Erősítő Marquant
- Erősítő Skytec
- Erősítő Luxman
- Erősítő Beyerdynamic
- Erősítő Ibiza Sound
- Erősítő HUMANTECHNIK
- Erősítő Quadral
- Erősítő Bluetech
- Erősítő Audica
- Erősítő Novero
- Erősítő Stagg
- Erősítő Velodyne
- Erősítő Skytronic
- Erősítő Tronics
- Erősítő Elektra
- Erősítő Peavy
- Erősítő Koda
- Erősítő Bellman
- Erősítő Konig Electronic
- Erősítő MaxGear
- Erősítő Engl
Legújabb útmutatók Erősítő
22 Szeptember 2024
27 Augusztus 2024
24 Augusztus 2024
24 Augusztus 2024
24 Augusztus 2024
24 Augusztus 2024
24 Augusztus 2024
24 Augusztus 2024
24 Augusztus 2024
24 Augusztus 2024