Használati útmutató Pure Acoustics QBT 230

Pure Acoustics hangszóró QBT 230

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pure Acoustics QBT 230 (3 oldal) a hangszóró kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/3
QBT-230
Bluetooth Audio Speaker
Dear Sir/Madame,
Congratulaons on your purchase of the Pure Acouscs QBT-230 .
Please read this user manual carefully in order to operate this device correctly and enjoy its excellent
performance.
I. Noce
Please store and use this product at normal temperature;
DO NOT expose this product to liquid or other damp condions;
DO NOT drop this product and keep out of reach of small children;
DO NOT disassemble, repair and modify this product yourself, doing so may void the warranty;
Please dispose of speaker properly. Built in baery may explode if not disposed of properly.
II. Reminder
1. To extend the speaker‘s service life, please refrain from listening to music under max volume for
extended periods of me to prevent damage to your hearing.
2. If at any me you have an issue with the speaker, immediately shut othe speaker, disconnect the
power plug (USB), to prevent damaging the speaker and other components.
3. Power shortages will aect the allotted Bluetooth distance and/or the Bluetooth rapid pair feature so
please make a note to recharge the QBT-230 aer long uses.
三
三
三
三三 Overview
V - Decrease the volume />：
V + Increase the volume /<：
Answer/ End Buon ：
Function Keys
Speaker
Power on/ o
3.5mm Aux in
USB 5V
IV.Parameters
Model: QBT- 230
Bluetooth specicaon: Bluetooth V2.1+EDR
Transmission distance: (It varies when the environmental factors and the connected Bluetooth ≦10M
devices are different)
USB charging voltage: DC 5V
Built-in baery: Lithium battery
Output power: 3W *2
Frequency response: 90Hz-20KHz
Sensivity: 80db±2db
S/N rao: ≥ 76dB
Dimensions: 58*73*120 MM
Unit net weight: 250.00g
V. Packing List
1. QBT-230 Bluetooth Audio Speaker 1 piece
2. 3.5mm audi jack cable 1piece o
3. Micro USB power cable 1piece
3 User Manual 1 piece .
VII. Common Funcons
Start: Turn on the QBT-230, when double beep is heard blue l begins to blink, the default power is 60%ed ,
and the speaker is now in pairing mode.
Bluetooth connecon: At this me, turn on the Bluetooth device you wish to connect and choose
QBT-230 from the list of discovered devices Q 230 will automacally exit pairing mode if no Bluetooth . BT
devices are found within 5 minutes.
Tip: If the connecon fails, please turn off the QBT- and restart it. Also, check that there is sufcient 230
power.
Bluetooth mode: Connect QBT- with the desired Bluetooth device and230 hold V + / V - to increase or decrease the
volume.
Hands-free: Connect QBT-230 with Bluetooth device. When an incoming call comes in, QBT-230 will beep. Press
to answer the call and re-press to hang up the call.
AUX source: Insert one end of provided audio cable into the AUX port on the back of Q 230 and the BT
other end into the desired audio port device. The player begins to play. The QBT-230 will start to play the
track You may increase or decrease the volume freely on the player. .
Tip: <V + >V - / are not operational in AUX mode, volume and music are controlled directly on the music player./
Smart automac quick charge: Charge in power-o state. Insert the aached USB power cable with the
micro USB end into the USB power port of QBT-230 and the other end into the USB port of PC or the USB
charger to start charging. When the charging is over, the red indicator will be o.
VIII. Compability
Device equipped with BLUETOOTH v2.1 or higher compable with (for details please refer to the relevant
agreements, general specicaon), iPad, iPhone (2nd generaon and iPhone with updated 3.1 soware
or later), iPod Touch MAC with Bluetooth funcon, and majority of smart phones or computers whi , ch
support a bluetooth feature.
Bluetooth v2.1+ EDR & A2DP, AVRCP, HFP
IVV. Troubleshooting
Problem
Failure in connecon and
pairing
The sound is small or
distorted
Disconnuous music
The indicato for r
Bluetooth mode is not on
Phenomenon

Termékspecifikációk

Márka: Pure Acoustics
Kategória: hangszóró
Modell: QBT 230

Szüksége van segítségre?

Ha segítségre van szüksége Pure Acoustics QBT 230, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Pure Acoustics

Pure Acoustics

Pure Acoustics QBT-340 Útmutató

15 Január 2025
Pure Acoustics

Pure Acoustics NRX-445 Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics NRX-485 Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics Dream Nano S Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics PMW 1215 Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics Dream 77 S Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics QBT 230 Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics NRX-600 Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics Sub80 Útmutató

24 Augusztus 2024
Pure Acoustics

Pure Acoustics OD-965BT Útmutató

24 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Celly

Celly Ultraboost Útmutató

1 Április 2025
Muse

Muse MC-50 WI Útmutató

1 Április 2025
QSC

QSC MD-FP152-124r Útmutató

30 Március 2025
QSC

QSC PL-CA6 Útmutató

30 Március 2025
QSC

QSC PL-SUB15 Útmutató

30 Március 2025
QSC

QSC PL-SUB10 Útmutató

30 Március 2025
QSC

QSC MD-FP152-64r Útmutató

30 Március 2025
QSC

QSC PL-SUB12 Útmutató

30 Március 2025
Audac

Audac ARCHI210 Útmutató

30 Március 2025
Audac

Audac ARCHI10 Útmutató

30 Március 2025