Használati útmutató Ozito OBL-0185

Ozito Bladblazer OBL-0185

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito OBL-0185 (6 oldal) a Bladblazer kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
Blower Housing
Battery Charger
1.5Ah Li-Ion Battery
Blower Tube
CORDLESS
BLOWER KIT
18V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 18V
Max. Air Speed: 210km/hour
Battery: 1.5Ah Li-Ion
Charge Time: 4-5 Hours
No Load Speed: 12,500/min
Weight: 1.62kg
OBL-0185
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will
be replaced in accordance with the terms of this warranty. Lithium
Ion batteries are covered by a 12 month warranty. Warranty
excludes consumable parts, for example: blower tube.
WARNING
The following actions will result in the warranty being void.
If the tool has been operated on a supply voltage other
than that specified on the tool.
If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the
instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0119
Cha rgingCha rged Cha rgingCha rged
ChargingCharged Char gingChar ged
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
ACCESSORIES
1. Blower tube
2. Blower tube release
3. On/off switch
4. Sure grip handle
5. Air intake vent
6. Battery seating
CORDLESS BLOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
345
WARNING! ENSURE THE BLOWER IS SWITCHED
OFF AND BATTERY DISCONNECTED BEFORE
ASSEMBLY AND/OR MAINTENANCE.
WARNING! DO NOT USE THE BLOWER WITH ANY
TYPE OF ACCESSORY OR ATTACHMENT. SUCH
USAGE MIGHT BE HAZARDOUS.
1 2 6
7 8 9
7. Battery release button
8. Battery charge indicators
9. Charge indicator button
10. Charger cradle
11. Charger LED indicators
12. Charger adaptor
10 11
1. Remove assembly
screw from underside
of motor housing and
put aside. Align the
tube with the outlet of
the blower.
Fitting the Blower Tube
2. Push the blower
tube onto the blower
until the tube release
clicks into place.
3. Retassemblyscrew
removed in step 1.
“CLICK”
12
2. BATTERY CHARGING
Allow at least 3 hours of charge time before initial use of the
battery. Charge the battery pack only with the charger provided.
The battery should be charged in a cool dry place. It will take
2 to 3 charging/discharging cycles before the battery achieves
maximum run time capacity.
Charging the Li-Ion Battery
1. Connect the charging adaptor into the mains power outlet.
3. With the battery sitting on a
atsurface,aligntheraised
ribs on the battery with the
recess in the charger cradle
and slide onto the battery
ensuringarmconnection.
Note:Thebatterywillnotdevelopamemory,itdoesnothaveto
be fully discharged before recharging.
Battery Charge Indicator
1 GREEN LED indicates that the
battery has only a low charge and
requires charging.
2 GREEN LEDs indicate that the
battery has mid state of charge.
3 GREEN LEDs indicate that the
battery is fully charged.
The included battery is
equipped with a battery charge
indicator to show the state of
the battery charge.
Press the charge indicator
button and check to see which
LED light is on.
Note: The battery needs to be removed from the tool to check
the state of charge.
Battery Protection System
Thetoolisequippedwiththebatteryprotectionsystem,which
helps to ensure a long service life.
The output power automatically cuts off during operation when
the tool and battery are placed under the following situations:
• When tool is overloaded:
Ifthisoccurs,turnoffthetoolandletitcooldownfor10mins,
removethecauseofoverload,thenresumeoperation.
• When the remaining battery capacity becomes low:
Recharge the battery pack.
Note: The battery protection system does not in any way
damage the tool.
Note: The indicated capacity may be lower than the actual level
during use or immediately after using the tool.
2. ThechargerLEDwillash
green showing power
is being supplied to the
charger.
ChargingCharged ChargingCharged
4. The charger LED will illuminate red signifying that the battery
ischarging.Batteryisfullychargedafter4-5hours,green
LED will turn on.
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
WE RECOMMEND THE USE OF A RESIDUAL CURRENT
DEVICE (RATED 30mA OR LESS).
ChargingCharge d
5. When removing the charger
fromthebattery,rstpress
thebatteryreleasetab,then
slide the cradle from its
position.
ChargingCharged
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged.
GREEN & RED (Flashing) Battery is faulty.
GREEN & RED (Illuminated)
Battery is too hot. Remove battery from
charger a let cool. Insert battery again
when at room temperature.

Termékspecifikációk

Márka: Ozito
Kategória: Bladblazer
Modell: OBL-0185

Szüksége van segítségre?

Ha segítségre van szüksége Ozito OBL-0185, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Bladblazer Ozito

Útmutatók Bladblazer

Legújabb útmutatók Bladblazer

Makita

Makita DUB183Z Útmutató

8 Október 2024
Stihl

Stihl BGA 56 Útmutató

3 Október 2024
Sun Joe

Sun Joe SBJ597E Útmutató

28 Szeptember 2024
RYOBI

RYOBI One+ RY18BLXB Útmutató

27 Szeptember 2024
RYOBI

RYOBI RY40451 Útmutató

24 Szeptember 2024
Hitachi

Hitachi RB 24EAP Útmutató

20 Szeptember 2024
Makita

Makita UB141D Útmutató

17 Szeptember 2024
Worx

Worx WG591.9 Útmutató

16 Szeptember 2024
Husqvarna

Husqvarna 125BX Útmutató

16 Szeptember 2024