Használati útmutató MBS ASK 412.4

MBS multiméter ASK 412.4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót MBS ASK 412.4 (18 oldal) a multiméter kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/18
Operating instructions /
Installation instructions
Please keep!
Low-voltage current transformer
- Plug-in current transformers -
ASK, SASK series
MBS AG
Eisbachstrasse 51
74429 Sulzbach-Laufen
Tel. +49 7976 9851-0
Fax. +49 7976 9851- 90
info@mbs-ag.com www.mbs-ag.com •
Before installation, commissioning or operation
of the device, read these instructions carefully
and thoroughly.
1. Safety instructions
CAUTION
The following points must be noted:
  The applicable laws, standards and provisions.
  The state of the technological art at the time of installation.
  The rules surrounding technology.
  The operating instructions.
The fact that operating instructions can only include general
instructions and that these instructions must be observed.
Before commissioning, check the device carefully for any damage
it may have sustained during transport. In the event of mechanical
damage, the device must not be put into operation.
The devices described are designed for installation by qualied
specialist electricians and must only be installed in electrical plant
rooms or in closed housings. Any other use or failure to comply with
these usage instructions will render the warranty / guarantee null
and void.
  Devices must only be installed in dry, indoor spaces.
  Do not install on easily ammable materials.
Operation with a rated current higher than that stated on the type
plate can result in overheating of the current transformer and burns.
2. Functional description
Current transformers in the ASK and SASK series are inductive
single-wire current transformers that operate on the transformer
principle. They are used to adapt the primary measuring parameter to
the input rated parameters of the connected measuring equipment.
As a result of the measuring principle used, these current transformers
are only suitable for use on alternating current networks.
Current transformers of the ASK and SASK series are
maintenance-free.
3. Warning information
WARNING
Dangerous electrical voltage can cause electric shock and burns.
Ensure that the information on the type plate and in the "Technical data"
under Point 5 matches the operating parameters of the system.
Before starting any installation work, disconnect the system from the
power supply!
WARNING
If there is an unladen (open) secondary circuit in the current
transformer, high voltages will be induced at its secondary
terminals. The voltage values that occur there represent a danger
to persons and to the functional safety of the current transformer.
"Open mode", i.e. operation of the current transformer
without secondary circuitry, must be avoided at all costs.

Termékspecifikációk

Márka: MBS
Kategória: multiméter
Modell: ASK 412.4

Szüksége van segítségre?

Ha segítségre van szüksége MBS ASK 412.4, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók multiméter MBS

MBS

MBS ASK 412.4 Útmutató

17 Augusztus 2024
MBS

MBS ASK 31.3 Útmutató

13 Augusztus 2024
MBS

MBS WSK 40 Útmutató

13 Augusztus 2024

Útmutatók multiméter

Legújabb útmutatók multiméter

PCE Instruments

PCE Instruments PCE-DM 3 Útmutató

28 Március 2025
Proline

Proline 15186 Útmutató

26 Március 2025
Kyoritsu

Kyoritsu KEW1021R Útmutató

14 Január 2025
Metrix

Metrix MTX 3293B Útmutató

13 Január 2025
PCE Instruments

PCE Instruments PCE-123 Útmutató

10 Január 2025
Testboy

Testboy Pen 1000 Útmutató

3 Január 2025
Testec

Testec TT-CC 220 Útmutató

1 Január 2025
Megger

Megger DPM1000 Útmutató

29 December 2024
Rigol

Rigol RP1300H Útmutató

29 December 2024
Klein Tools

Klein Tools MM300 Útmutató

29 December 2024