Használati útmutató Kodak Portrait 3D Printer
Kodak
3D nyomtató
Portrait 3D Printer
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kodak Portrait 3D Printer (30 oldal) a 3D nyomtató kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/30
!
KODAK Portrait 3D Printer
!
!
!
!
!
User Manual!
!
!
!
!
Please read all directions before using the product and retain this guide for reference. !
!
!
!
!
!
!
!
!
!
!
!
CONTENTS
INTRODUCTION ...................................................................................................... 3
WARNINGS AND SAFETY PRECAUTIONS .................................................... 3
FEATURES .................................................................................................... 4
SAFETY INFORMATION ................................................................................ 6
BOX CONTENT ............................................................................................. 7
SETUP ........................................................................................................... 7
USING YOUR 3D PRINTER ............................................................................ 9
PRINTING .................................................................................................... 13
PRINTING USING THE KODAK 3D CLOUD .................................................. 17
CARE AND MAINTENANCE ......................................................................... 21
TROUBLESHOOTING .................................................................................. 24
SPECIFICATIONS ........................................................................................ 25
CERTIFICATIONS ........................................................................................ 27
CUSTOMER SERVICE ................................................................................. 29
!
!
3!
!
INTRODUCTION
Thank you for purchasing the KODAK Portrait 3D Printer. This User Guide is
intended to provide you with guidelines to ensure that operation of this
product is safe and does not pose risk to the user.
Any use that does not conform to the guidelines described in this User Guide
may void the limited warranty.
Every effort has been made to ensure that the contents of this manual are
accurate. However Smart International, Inc. reserves the right to make
changes without notice.
You can always find the most up-to-date version of this user guide and other
instructions at . support.smart3d.tech
This product is covered by a limited one-year warranty. Coverage is subject
to limits and exclusions. See warranty for details.
WARNINGS AND SAFETY PRECAUTIONS
Refer to this user guide and take note of all safety precautions before using
your 3D printer.
Warning:
• To prevent damage to the 3D Printer which may result in a fire or
electrical shock hazard, do not expose the 3D Printer set to rain or
excessive moisture.
• For safety, do not place vessels or any container which contain fluid
including water, on or near the 3D Printer.
• Do not insert any objects in the ventilation slots.
Location:
• Place the 3D printer on a solid and flat surface capable of sustaining
the weight of the 3D printer (about 25 kg or 57 lbs. including filament
spools).
• Adequate ventilation is essential to prevent the 3D printer failure.
Ensure that the 3D printer is placed in a position to allow a free flow of
air. Do not cover ventilation opening on the bottom cover. Do not
place the 3D printer in an enclosure or very close to walls or other
devices.
• Avoid excessively warm locations or direct sunlight to prevent possible
damages to the 3D printer.
• Care should be taken not to expose the set to any unnecessary
vibration, moisture, dust or heat.
Service:
• Never attempt to disassemble this product. There are no user
serviceable parts.
• Only use the parts provided by the manufacturer.
Termékspecifikációk
| Márka: | Kodak |
| Kategória: | 3D nyomtató |
| Modell: | Portrait 3D Printer |
Szüksége van segítségre?
Ha segítségre van szüksége Kodak Portrait 3D Printer, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók 3D nyomtató Kodak
30 Augusztus 2024
Útmutatók 3D nyomtató
- 3D nyomtató Polaroid
- 3D nyomtató Renkforce
- 3D nyomtató MakerBot
- 3D nyomtató Gembird
- 3D nyomtató Weller
- 3D nyomtató Velleman
- 3D nyomtató Flashforge
- 3D nyomtató Anker
- 3D nyomtató Exibel
- 3D nyomtató BQ
- 3D nyomtató Monoprice
- 3D nyomtató XYZprinting
- 3D nyomtató Weistek
- 3D nyomtató Leap Frog
- 3D nyomtató Snapmaker
- 3D nyomtató Dimension
- 3D nyomtató Anycubic
- 3D nyomtató German RepRap
- 3D nyomtató Creality3D
- 3D nyomtató Wanhao
- 3D nyomtató Artillery
- 3D nyomtató GooVer
- 3D nyomtató Easy Threed
- 3D nyomtató Zortrax
- 3D nyomtató LulzBot
- 3D nyomtató SINDOH
- 3D nyomtató PP3DP
- 3D nyomtató Wasp
- 3D nyomtató 3D Systems
- 3D nyomtató Creality
- 3D nyomtató Raise3D
- 3D nyomtató Craftbot
Legújabb útmutatók 3D nyomtató
31 December 2025
27 December 2024
27 December 2024
27 December 2024
27 December 2024
12 December 2024
27 Szeptember 2024
14 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024