Használati útmutató Creality Ender-3 V2 Neo

Creality 3D nyomtató Ender-3 V2 Neo

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Creality Ender-3 V2 Neo (19 oldal) a 3D nyomtató kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/19

3D Printer User Manual

V1.1

Ender-3 V2 Neo

To Our Dear Users

Thank you for choosing Creality. For your convenience, please read through this User Manual before you start and follow

the instructions provided carefully.

Creality is always ready to provide you with high-quality services. If you encounter any issues or have any questions when

using our products, please use the contact information at the end of this manual to contact us. To further improve your

user experience, you can ﬁnd more about our devices via the following methods:

User manual: You can ﬁnd instructions and videos in the memory card provided with the printer.

You can also visit our oﬃcial website (https://www.creality.com) to ﬁnd information regarding software, hardware,

contact information, device instructions, device warranty information, and more.

Firmware Upgrade

Please visit our oﬃcial website https://www.creality.com/download. Click Homepage → Support → Download.

Download the required ﬁrmware and install it.

Instructions for Use

Do not use this printer by methods or operations that are not described in this manual, otherwise it may result in accidental injury or property damage.

Do not place this printer in a vibrating or any other unstable environment, as the printing quality will be compromised when the printer shakes.

Do not place this printer near ﬂammable materials, explosive materials or high heat sources. Please place this printer in a ventilated, cool and low-dust environment.

Please use the power cord provided with the printer and do not use the power cord of other products. The power plug must be plugged into a three-hole socket with a ground wire.

Do not touch the nozzle or hotbed while the printer is in operation, otherwise you may get burned.

Do not wear gloves or accessories while operating the printer, otherwise the moving parts may cause accidental injury including cuts and lacerations.

After the printing process is complete, please use tools to clean up the ﬁlament on the nozzle while the nozzle is still hot. Do not touch the nozzle with your hands when cleaning,

otherwise your hands may get burned.

Please regularly clean the printer body with a dry cloth while the power is oﬀ, and wipe oﬀ dust, sticky printing materials, and foreign objects on the guide rails.

Children under the age of 10 must not use this printer without adult supervision in order to avoid accidental injury.

This printer has a safety protection mechanism. Please do not manually move the nozzle or printing platform quickly while the printer is on, otherwise the printer will automatically

power oﬀ for protection.

Users should abide by the laws and regulations of the corresponding country and region where the equipment is located (place of use), abide by professional ethics, and pay

attention to safety obligations. The use of our products or equipment for any illegal purpose is strictly prohibited. Our company is not responsible for the relevant legal responsibilities

of any violators.