Használati útmutató Creality Halot-Lite

Creality 3D nyomtató Halot-Lite

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Creality Halot-Lite (22 oldal) a 3D nyomtató kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/22

3D Printer User Manual

V1.4

HALOT-LITE

Dear Consumers,

Firmware Upgrade

Please login the oﬃcial website https://www.creality.com/download, switch the language and select the relevant printer and

model and download the required ﬁrmware, you can use it after the installation is ﬁnished.

Thank you for choosing our products.For the best experience,please read the instructions before operating the Printer. Our

teams will always be ready to render you the best services. Please contact us via the phone number or e-mail address

provided at the end when you encounter any problem with the Printer. For a better experience in using our product,

you can also learn how to use the printer in the following ways:

View the a ompanied instructions and videos in the U disk.cc

Visit our oﬃcial website www.creality.com to ﬁnd relevant software/hardware information,contact details and operation and

maintenance instructions.

NOTES

Do not use the printer any way other than described here in order to avoid personal injury or property damage.

Do not place the printer near any heat source or ﬂammable or explosive obje s. We suggest placing it in a well-ventilated, low-dust environment.ct

Do not expose the printer to violent vibration or any unstable environment, as this may cause poor print quality.

Please use recommended resin to in case damage of machine.

Do not use any other p er cable except the one supplied. Always use a grounded three-prong p er outlet.ow ow

Please do not open the plastic c er during usage, otherwise the printing will be interrupted.ov

Do not wear cotton gl es when operating the printer. Such cloths may become tangled in the printers moving parts leading to burns, possible bodily injury, or printer damage.ov

Please wait a moment after the print is ﬁnished. And please wear gloves to take out the print by tools.

Children under 10 years should not use the printer without supervision.

Tips：Do not plug or unplug the power cord when power on.

Clean the printer frequently. Always turn the power oﬀ when cleaning, and wipe with a dry cloth to rem e dust, adhered printing plastics or any other material oﬀ the frame,ov

guide rails, or wheels. Use glass cleaner or isopropyl alcohol to clean the print surface.

Users should comply with the laws and regulations of the corresponding countries and regions where the equipment is loc ed (used), abide by professional ethics, pay attention to safety at

obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any violators' legal liability under any circustance.