Használati útmutató Klipsch RSA-500
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klipsch RSA-500 (16 oldal) a Receiver kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/16
RSA-500
SUBWOOFER AMPLIFIER
OWNER’S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused
for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Do not expose this apparatus to dripping or splashing and
ensure that no objects filled with liquides, such as vases, are
placed on the apparatus.
16. To completely disconnect this apparatus from teh AC Mains,
disconnect the power supply cord plug from the AC receptacle.
17. The mains plug of the power supply cord shall remain readily
operable.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
WARNING: To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
WARNING: Voltages in this equipment are hazardous to life.
No user-serviceable parts inside. Refer all servicing to qualified
service personnel.
CAUTION: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this device.
ABOUT YOUR KLIPSCH PURCHASE
Thank you for your purchase of a Klipsch subwoofer amplifier.
After reading this manual and connecting your system, you will
hear the results of over 60 years of stringent engineering and
class-leading research and development. Again, thank you for
choosing Klipsch and we hope that your subwoofer amplifier
brings life to your music and movies for many years.
UNPACKING
The easiest way to remove the amplifier from its carton is to turn
the open end of the box down so that it is resting on a table or
the floor, with the flaps spread out and away. Then pull the box
straight up and off. Remove any packing material from the
amplifier, place it back in the carton, and store in case you ever
need to ship the amplifier.
FRONT PANEL CONTROLS
1. Lowpass Crossover
The Lowpass Crossover control allows you to select the proper
frequency at which your subwoofer system blends with your
main speakers. It is adjustable from 40-120Hz. You should set
this control to the approximate low-frequency limit of your main
left and right speakers.
2. Level Control
The Level control is the volume setting for the amplifier. It is used
in conjunction with the subwoofer output level control on your
preamplifier or receiver. It is used to adjust the overall output
level of your subwoofer system.
RSA-500 SUBWOOFER AMPLIFIER
English
Figure 1
Figure 2
REAR PANEL INPUTS AND OUTPUTS
/CONNECTIONS AND SETUP
Make all connections with the power turned “OFF” on both
the subwoofer amplifier and your receiver or preamplifier!
1. Speaker Level Inputs
The Speaker Level inputs which allow this amplifier to be used in
whole house distributed audio systems or with receivers that do
not feature line or subwoofer outputs. You may connect either
the inputs or outputs with Banana or pin connectors as well as
stripped wire up to 12 gauge.
2. Line Level Inputs and Outputs
The Line Level inputs consists of a pair of stereo jacks and a
single LFE RCA phono jack. Either one or both of the stereo jacks
may be used. (Use a shielded, high quality subwoofer
interconnect cable of appropriate length with RCA plugs on each
end. Your dealer can help you select a suitable cable.) Use
the LFE jack when you are using the crossover built into your
receiver or processor. The stereo inputs should be used when
you wish to utilize the crossover built into the RSA-500. The Line
Level outputs consist of a pair of gold plated stereo RCA jacks
and a single LFE RCA phono jack. This set of outputs are unfil-
tered pass through for both the Line Level and LFE input signals.
They can be used to connect to a second RSA-500 amplifier or
to connect back to your electronics if needed.
3. Phase Control
The Phase control on the RSA-500 is switchable between either
0˚ or 180˚. This control allows you to fine tune the performance
of your subwoofer system by optimizing the blend with the main
speakers. One of the positions may result in an audible increase
in bass output depending upon room placement.
4. Equalizer Selection
The Equalizer switch has four settings which are labeled 1
through 4. In the “1” position, the EQ curve selected is opti-
mized for the RW-5802 in-wall subwoofer. In the “2” position,
the EQ curve selected is optimized for the AW-800-SW outdoor
subwoofer. The position labeled “3” is for future use. The
position labeled “4” is for future use.
5. Power Mode Selection
The Power Mode switch has three settings – “Trigger”, “Auto”
and“On”. In the “Trigger” position, leave the Master Power switch
in the “On” position and set the Power Mode switch to the
“Trigger” position, then the amplifier will automatically turn itself
on and off when 5-30 volts DC is detected or removed from the
rear panel 1/8" Trigger jack. Tip is positive, ring is negative.
There is no delay when using the Trigger function. In the “Auto”
position, leave the Master Power switch in the “On” position and
set the Power Mode switch to the “Auto” position, then the
amplifier will automatically turn itself on and off when an audio
signal is detected or removed from the rear low or high level
inputs. There is a 2 second On delay and a 15 minute Off delay
when using the Auto Power function. In the “On” position, the
Master Power switch turns the amplifier on or off. Set the Master
Power switch to the “On” position and set the Power Mode
switch to the “On” position, then the amplifier will turn itself on
and off with the Master Power switch.
6. Speaker Level Outputs
The Speaker Level outputs may connected either with Banana or
pin connectors as well as stripped wire up to 12 gauge.
7. AC Line Cord and Main Switch
The AC Line connection uses a detachable two-prong power
cord. Insert the line cord into this jack, set the Master Power
switch located above the cord to “Off”, then insert the power
cord into an appropriate AC receptacle. Leave the Master Power
switch off until all connections are completed. (We recommend
leaving the Master Power and Power Mode switches in the “On”
position for normal operation in most systems.)
CONNECTIONS AND ADJUSTMENTS
The RSA-500 is a high-performance, power amplifier with a
built-in subwoofer crossover. It is designed specifically to drive
one or two subwoofer modules, such as the RW-5802, to maxi-
mum output without audible distortion or risk of damage.
Although the amplifier’s connections and controls are simple,
their use varies somewhat according to the subwoofer system’s
application. Typical setup procedures are described in the
following sections – one for digital systems and one for
analog systems.
DIGITAL SURROUND RECEIVER OR
PROCESSOR CONNECTIONS
Today’s Dolby Digital®and DTS®digital surround receivers and
processors, as well as all THX-certified models, have line-level
subwoofer outputs and built-in subwoofer crossovers. If your
system is built around one of these, it will almost always be best
to use the RSA-500’s LFE input. This will bypass the crossover
and level controls (Figure 3). Use a shielded, high quality sub-
woofer interconnect cable of appropriate length with RCA plugs
on each end. Your dealer can help you select a suitable cable. Be
sure to go into your receiver or processor’s speaker setup menu
and set Subwoofer to “On” or “Yes” in the subwoofer menu. Your
receiver or processor may have additional bass management
abilities beyond simply activating the subwoofer output. Consult
your receiver or processor’s owner’s manual or your dealer for
more information on the proper bass management settings for
your system.
• Crossover Adjustment – When the RSA-500’s LFE input is
used, the crossover control will not function.
Figure 3
Termékspecifikációk
| Márka: | Klipsch |
| Kategória: | Receiver |
| Modell: | RSA-500 |
Szüksége van segítségre?
Ha segítségre van szüksége Klipsch RSA-500, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Receiver Klipsch
1 Szeptember 2024
23 Július 2024
Útmutatók Receiver
- Receiver Phoenix Gold
- Receiver Sony
- Receiver August
- Receiver Yamaha
- Receiver Nedis
- Receiver Marantz
- Receiver Philips
- Receiver Pioneer
- Receiver Garmin
- Receiver RCF
- Receiver Bosch
- Receiver JVC
- Receiver Harman Kardon
- Receiver Nokia
- Receiver Emos
- Receiver Hifonics
- Receiver Onkyo
- Receiver Geemarc
- Receiver LogiLink
- Receiver Technics
- Receiver Roland
- Receiver JBL
- Receiver DAP-Audio
- Receiver GoGen
- Receiver AVM
- Receiver Boss
- Receiver Crestron
- Receiver Strong
- Receiver Cyrus
- Receiver VOX
- Receiver Tripp Lite
- Receiver MEE Audio
- Receiver Hegel
- Receiver Reely
- Receiver Aiwa
- Receiver Speco Technologies
- Receiver Kenwood
- Receiver Rega
- Receiver Jabra
- Receiver Hama
- Receiver ELAC
- Receiver Renkforce
- Receiver Sencor
- Receiver Focusrite
- Receiver Bose
- Receiver Raymarine
- Receiver Blackstar
- Receiver Sennheiser
- Receiver Cambridge
- Receiver Kanto
- Receiver Alpine
- Receiver Optoma
- Receiver Omnitronic
- Receiver Logitech
- Receiver Amiko
- Receiver SPL
- Receiver Pro-Ject
- Receiver TOA
- Receiver SVS
- Receiver Hilti
- Receiver Crunch
- Receiver Smart-AVI
- Receiver Naim
- Receiver Bush
- Receiver Power Dynamics
- Receiver Dynacord
- Receiver Trevi
- Receiver Memphis Audio
- Receiver The T.amp
- Receiver Ground Zero
- Receiver Denon
- Receiver ATen
- Receiver Electro-Voice
- Receiver JL Audio
- Receiver Hartke
- Receiver Auna
- Receiver Mac Audio
- Receiver Behringer
- Receiver Mooer
- Receiver REL Acoustics
- Receiver Chamberlain
- Receiver Chord
- Receiver Lotronic
- Receiver Bogen
- Receiver Shure
- Receiver Renegade
- Receiver PreSonus
- Receiver Peavey
- Receiver Kogan
- Receiver Alecto
- Receiver Velleman
- Receiver Universal Audio
- Receiver AEA
- Receiver Russound
- Receiver Teac
- Receiver Clarion
- Receiver Blustream
- Receiver Metra
- Receiver Monacor
- Receiver MXL
- Receiver S.M.S.L
- Receiver Anthem
- Receiver McIntosh
- Receiver LD Systems
- Receiver Proel
- Receiver Blaupunkt
- Receiver Deaf Bonce
- Receiver NAD
- Receiver Conrad
- Receiver Datapath
- Receiver IRiver
- Receiver Samson
- Receiver Cayin
- Receiver Vonyx
- Receiver Alto
- Receiver Delta Dore
- Receiver Infinity
- Receiver Magnat
- Receiver Bang & Olufsen
- Receiver Trust
- Receiver AKAI
- Receiver Konig
- Receiver Marmitek
- Receiver TechniSat
- Receiver Fenton
- Receiver Line 6
- Receiver Jensen
- Receiver Pyle
- Receiver MuxLab
- Receiver Audioengine
- Receiver AVMATRIX
- Receiver Kemo
- Receiver Rolls
- Receiver Salora
- Receiver IFM
- Receiver Musical Fidelity
- Receiver DataVideo
- Receiver A-NeuVideo
- Receiver Stinger
- Receiver Lindy
- Receiver Audizio
- Receiver Audiotec Fischer
- Receiver Rotel
- Receiver Hertz
- Receiver Bowers & Wilkins
- Receiver FBT
- Receiver Audiolab
- Receiver Atlas Sound
- Receiver AKG
- Receiver Marshall Electronics
- Receiver Ashly
- Receiver AudioControl
- Receiver Monitor Audio
- Receiver Audac
- Receiver Technical Pro
- Receiver Siig
- Receiver Yorkville
- Receiver Rockford Fosgate
- Receiver Krüger&Matz
- Receiver Salus
- Receiver Dual
- Receiver ICOM
- Receiver Gefen
- Receiver Inateck
- Receiver Kathrein
- Receiver Yaesu
- Receiver Vocopro
- Receiver Optex
- Receiver Medeli
- Receiver Palmer
- Receiver Imperial
- Receiver Kicker
- Receiver DBX
- Receiver Sangean
- Receiver Camille Bauer
- Receiver Valueline
- Receiver Focal
- Receiver MB Quart
- Receiver Legamaster
- Receiver Lectrosonics
- Receiver IFi Audio
- Receiver Audix
- Receiver Vivolink
- Receiver Arcam
- Receiver FiiO
- Receiver Intelix
- Receiver Comprehensive
- Receiver Orava
- Receiver Alfatron
- Receiver Match
- Receiver Thorens
- Receiver Majestic
- Receiver Smartwares
- Receiver Teufel
- Receiver Classé
- Receiver Vincent
- Receiver NuPrime
- Receiver Reloop
- Receiver CSL
- Receiver Artsound
- Receiver KanexPro
- Receiver Kramer
- Receiver Ram Audio
- Receiver ART
- Receiver BZBGear
- Receiver Ampeg
- Receiver American Audio
- Receiver Audison
- Receiver Palsonic
- Receiver Caliber
- Receiver Exibel
- Receiver Vision
- Receiver Summit Audio
- Receiver Musway
- Receiver Sunstech
- Receiver Elektrobock
- Receiver Avalon
- Receiver Sonance
- Receiver Oculus VR
- Receiver Redline
- Receiver Marquant
- Receiver Matrox
- Receiver Steren
- Receiver Polk
- Receiver Sandberg
- Receiver Galaxy Audio
- Receiver Denson
- Receiver Roksan
- Receiver Valcom
- Receiver Goobay
- Receiver Naxa
- Receiver Sherwood
- Receiver QTX
- Receiver Zgemma
- Receiver RDL
- Receiver Zehnder
- Receiver Mx Onda
- Receiver Fredenstein
- Receiver QSC
- Receiver Lanzar
- Receiver Humax
- Receiver Vaddio
- Receiver Jung
- Receiver Golden Age Project
- Receiver Apart
- Receiver Audio Pro
- Receiver Radial Engineering
- Receiver Homecast
- Receiver Graupner
- Receiver Bluesound
- Receiver Integra
- Receiver Revox
- Receiver Comica
- Receiver Fusion
- Receiver Skytec
- Receiver Linn
- Receiver Monoprice
- Receiver Ibiza Sound
- Receiver Axton
- Receiver Edision
- Receiver HiFi ROSE
- Receiver OSD Audio
- Receiver Mark Levinson
- Receiver Soundstream
- Receiver Xoro
- Receiver DLS
- Receiver Adastra
- Receiver Block
- Receiver Aeon Labs
- Receiver Citronic
- Receiver Formuler
- Receiver LTC
- Receiver Dreambox
- Receiver Zalman
- Receiver HUMANTECHNIK
- Receiver Crest Audio
- Receiver Primare
- Receiver Xantech
- Receiver Ferguson
- Receiver Wet Sounds
- Receiver Televés
- Receiver Extron
- Receiver Xtrend
- Receiver Scansonic
- Receiver Helix
- Receiver Winegard
- Receiver Laney
- Receiver Devialet
- Receiver Xsarius
- Receiver EA
- Receiver DirecTV
- Receiver Octagon
- Receiver GOgroove
- Receiver Crown
- Receiver SRS
- Receiver Avantree
- Receiver Antelope Audio
- Receiver Jolida
- Receiver Inovonics
- Receiver Ecler
- Receiver Ashdown Engineering
- Receiver Triax
- Receiver Mtx Audio
- Receiver Parasound
- Receiver Velodyne
- Receiver Epcom
- Receiver Sunfire
- Receiver Selfsat
- Receiver Skytronic
- Receiver CYP
- Receiver Karma
- Receiver TV One
- Receiver Powersoft
- Receiver Esoteric
- Receiver IMG Stage Line
- Receiver Wireless Solution
- Receiver Aurel
- Receiver ESX
- Receiver NUVO
- Receiver Pyramid
- Receiver LEA
- Receiver Sound Ordnance
- Receiver Canyon
- Receiver FiveO
- Receiver Planet Audio
- Receiver Koda
- Receiver Bang Olufsen
- Receiver JTS
- Receiver Niles
- Receiver Knoll
- Receiver Creek
- Receiver Mobile Crossing
- Receiver DAP
- Receiver GigaBlue
- Receiver CAD Audio
- Receiver Triangle
- Receiver Lab Gruppen
- Receiver Wavtech
- Receiver CyberData Systems
- Receiver WyreStorm
- Receiver Williams Sound
- Receiver Lyngdorf
- Receiver WesAudio
- Receiver AudioSource
- Receiver Stewart
- Receiver Leema
- Receiver Apantac
- Receiver Axing
- Receiver Seco-Larm
- Receiver Mosconi
- Receiver Crest
- Receiver TechLogix Networx
- Receiver Meridian
- Receiver Quad
- Receiver BC Acoustique
- Receiver Gold Note
- Receiver IOTAVX
- Receiver Fosi Audio
- Receiver Shinybow
- Receiver Rexing
- Receiver Shanling
- Receiver Inter-M
- Receiver Sinus Live
- Receiver Soundtrack
- Receiver Canor
- Receiver C2G
- Receiver Unison Research
- Receiver Cerwin-Vega
- Receiver Universal Remote Control
- Receiver BMB
- Receiver Advance
- Receiver Cloud
- Receiver PTN-electronics
- Receiver VMV
- Receiver Black Hydra
- Receiver Bellari
- Receiver GlobalSat
- Receiver Aplic
- Receiver PureLink
- Receiver FoneStar
- Receiver Glemm
Legújabb útmutatók Receiver
16 Október 2024
16 Október 2024
16 Október 2024
15 Október 2024
15 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024