Használati útmutató Klein Tools VDV Scout Pro 3

Klein Tools Mérőberendezések VDV Scout Pro 3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klein Tools VDV Scout Pro 3 (42 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/42

VDV501-852

VDV501-853

VDV ScoutTM Pro 3

INSTRUCTION MANUAL

• VOICE, DATA AND VIDEO CABLE TESTING

• DETECTS SHORT FAULTS, OPEN FAULTS,

REVERSALS, MISWIRES, CROSSOVER WIRING

AND SPLIT PAIRS

• PoEPOWER OVER ETHERNET ( )

• CABLE ID

• LENGTH MEASUREMENT

• TONE GENERATOR

• EXTRA-LARGE BACKLIT LCD

• HUB BLINK

• AUTO POWER-OFF

ENGLISH pg. 2

GEBRAUCHSANLEITUNG

• PRÜFUNG VON KABELN FÜR SPRACH-, DATEN- UND

VIDEOÜBERTRAGUNG

• ERKENNT KURZSCHLÜSSE, UNTERBRECHUNGEN,

VERPOLUNG, VERDRAHTUNGSFEHLER UND SPLIT PA

• PoEPOWER OVER ETHERNET ( )

• KABEL-ID

• LÄNGENMESSUNG

• TONGENERATOR

• EXTRA GROSSES BELEUCHTETES LCD-DISPLAY

• HUB-BLINK-FUNKTION

• AUTOMATISCHE ABSCHALTUNG

DEUTSCH pg. 12

MODE D’EMPLOI

• TEST DE CÂBLES TÉLÉPHONIQUES, DE DONNÉES ET VIDÉO

• DÉTECTE LES COURT-CIRCUITS, LES CIRCUITS OUVERTS,

LES INVERSIONS, LES ERREURS DE CÂBLAGE, LES CÂBLES

CROISÉS ET LES PAIRES DIVISÉES

• PoEPOWER OVER ETHERNET ( )

• IDENTIFICATION DE CÂBLE

• MESURE DE LONGUEUR

• GÉNÉRATEUR DE TONALITÉ

• TRÈS GRAND ÉCRAN LCD RÉTROÉCLAIRÉ

• CLIGNOTEMENT DE CONCENTRATEUR (HUB BLINK)

• MISE HORS TENSION AUTOMATIQUEV

FRANÇAIS pg. 22

MANUAL DE INSTRUCCIONES

• COMPROBACIÓN DE CABLES DE VOZ, DATOS Y VÍDEO

• DETECTA CORTOS, ABERTURAS, INVERSIONES, CONEXIONES

INCORRECTAS, CABLEADOS CRUZADOS Y PARES DIVIDIDOS

• ALIMENTACIÓN A TRAVÉS DE ETHERNET (Power over Ethernet, PoE)

• IDENTIFICACIÓN DE CABLES

• MEDICIÓN DE LONGITUD

• GENERADOR DE TONOS

• PANTALLA LCD RETROILUMINADA EXTRAGRANDE

• PARPADEO EN EL HUB

• APAGADO AUTOMÁTICO

ESPAÑOL pg. 32

1 2 34567 8

Pas Res X-over v

Fail Short Split Open

Shielded

PoE

ENGLISH

GENERAL SPECIFICATIONS

The Klein Tools VDV Scout

TM Pro 3 is a portable voice-data-video cable tester. It tests and

troubleshoots RJ11, RJ12, RJ45 and F-connector terminated cables, and provides tone generation

for cable tracing. The VDV ScoutTM Pro 3 also measures cable length, tests for shield, performs hub

blink testing and traces up to 19 locations (up to 5 locations with the included remotes, additional

remotes are available separately).

PORTS AND REMOTES OVERVIEW

• Dimensions: 6.5" x 3.0" x 1.6" (16.5 x 7.6 x 4.1 cm)

• Weight: 11 oz. (312 g) with battery and remote

• Operating Temperature: 32° to 122 °F (0° to 50 °C)

• Storage Temperature: -4° to 140 °F (-20° to 60 °C)

• Humidity: 10% to 90%, non-condensing

• Maximum Voltage (between any two connector

pins without damage):

- RJ Jack: 66V DC or 55V AC

- F-Connector: 66V DC or 55V AC

• Battery Life (9V alkaline):

- Standby: 4 years

- Active: 50 hours (without backlight)

• Cable Types: Shielded or unshielded; Cat7a, Cat7,

Cat6a, Cat6, Cat5e, Cat3, Coaxial

• Length Measurement Method: Capacitance

• Length Measurement Range:

1.5' to 1999' (0.5 m to 610 m) with 15 pF/ft

• Length Accuracy:

(5% ft) or (5% m)

• Length Constant Range:

10 pF/ft to 40 pF/ft (33 pF/m to 132 pF/m)

WARNINGS

To ensure the safe operation and service of the tester, please follow these instructions. Failure to

observe these warnings can result in severe injury or death.

• The PoE jack, located on the right side of the Scout

Pro 3 is the only jack designed for PoE energised

cables. Connecting AC energised cables to any port may damage it and pose a safety hazard to the user.

• Improperly terminated RJ plugs have the potential to damage the jacks on the VDV Scout

Pro 3. Visually

inspect an RJ plug before inserting it into the tester. The contacts should always be recessed into the plastic

housing of the plug. Plugging 6-position plugs into the 8-position jack on the tester has the potential to

damage the outer-most contacts of the jack, unless the plug is specifically designed for that purpose.

SYMBOLS ON THE TESTER

Warning or Caution Do use on energised circuits.NOT

Always wear approved eye protection. Read the instructions

Conformité Européenne. Conforms with European Economic Area directives.

This symbol indicates that the equipment and its accessories shall be subject to separate

collection and correct disposal.

RJ45 Port: Data cable, Ethernet cable, Cat5e, Cat6, Cat6a, Cat7, Cat7a.

F-Connector Port: Video cable, coaxial cable, RG6/RG6Q cable, RG59 cable.

RJ11/12 Port: Voice cable, POTS (plain old televoice service) cable, 4-wire cable, 6-wire cable,

2 twisted-pair cables, 3 twisted-pair cables, Cat3.

VDV SCOUTTM PRO 3 TESTER LOCATION ID REMOTES

F-connector port

RJ11/12 port*RJ45 port*

PoE port*

Use for cable location identification mapping.

Set Nos. 1–5 included with VDV500-851,

setNos. 1–18 included with VDV501-852 and

sold separately.

LanMap™

Location ID Remote**

VDV526-055

RJ45

connector

**Cannot be used to perform wire map or

cable length tests.

*The RJ jacks share internal connections, so only one RJ cable can be connected at a time for accurate cable

test results. However, an RJ cable and a coax cable may be connected at the same time. In ID mode, all

connectors on the VDV ScoutTM Pro 3 may be connected at the same time.

CONNECTORS

Barrel Connector

VDV814-609

Female-to-female F-connector

Use with F-connector port

CoaxMap™

Location ID Remote**

VDV512-056

F-connector

ENGLISH

SELF-STORING TEST + MAP™ ID REMOTE (VDV501-210)

TEST + MAP™ ID REMOTES (VDV501-2## SERIES)

Use for cable location identification mapping and/or continuity testing. Self-storing remotes display

on tester as Remote ID No. 1. Included with all VDV Scout

Pro 3 models.

Use for cable location identification

mapping and continuity testing.

Remotes display on tester asRemote ID

Nos. 1-12. Set Nos. 2–6 included with

VDV500-853 and sold separately, set

Nos. 7–12 sold separately, individual

remote Nos. 1–12 each sold separately.

RJ11/12

port RJ45

port

F-connector

port

KEYPAD FUNCTION

• VOICE / UP BUTTON

: Performs wiremap test on RJ11/RJ12

terminated cable, toggles selection upward in other modes.

• VIDEO BUTTON

: Performs continuity test on F-terminated coax cable.

• DATA / DOWN BUTTON

: Performs wiremap test on RJ45

terminated cable, toggles selection downward in other modes.

• TONE / HUB BLINK BUTTON

: Cycles through available

tone cadences, initiates Hub Blink.

• SETTINGS BUTTON

: Selects feet or metres,

enters Length Constant Edit mode.

• PoELENGTH / BUTTON

: Measures cable length, initiates PoE test.

• POWER / BACKLIGHT BUTTON

: Turns unit on or off, turns backlight on or off.

B C

• VOICE / UP BUTTON

: Short Press: Initiates wiremap test on RJ11/RJ12 terminated cable. When in Tone or

Length Test mode, the first short press selects Voice mode, while repeated short presses selects wires orpairs of

wires. Turns Loop mode on or off. When in Tone or Length Test mode, returns to the home screen. Long press:

When in Settings mode, changes UOM from feet to metres, or increases the length contant value.

• VIDEO BUTTON

: Short Press: Initiates continuity test on an F-terminated coax cable.

When in Tone or Length

Test mode, a short press selects Video mode.

Long Press:

Turns Loop mode on or off. When in Tone or Length

Test mode, returns to the home screen.

• DATA / DOWN BUTTON

Short Press: Initiates wiremap test on RJ45 terminated cable. When in Tone or Length Test mode, first short press

selects Data mode, while repeated short presses select wires or pairs of wires. Turns Loop mode on or Long Press:

off. When in Tone or Length Test mode, returns to the home screen. When in Settings mode, changes UOM from

feet to metres, or increases the length contant value.

• TONE / HUB BLINK BUTTON

: Short Press: Repeated short presses will toggle through the available tone

cadences. Initiates Hub Blink. Long Press:

NOTE: DO NOT attempt to use Hub Blink function when connected to a

Power over Ethernet (PoE) active port.

• SETTINGS BUTTON

: Short Press: Enters Length Constant edit mode (use the UP

and DOWN

buttons

to adjust the value). Default for Length Constant mode is the wire pair of Pins 1 and 2 of data/RJ45 cable, and

the wire pair of Pins 3 and 4 of voice/phone cable. See the LENGTH CONSTANT Second section for more details.

Short Press: Displays option of feet or metres (use the UP

and DOWN

buttons to change). See the

LENGTH MEASUREMENT Long Press: section for details. Exits Settings mode and returns to the home screen.

• LENGTH / PoE BUTTON

: Short Press: Initiates cable length test. Test will default to a cable connected to the

RJ45 port. By default, the test will initiate on the first wire with no faults found. See the LENGTH MEASUREMENT

and LENGTH CONSTANT sections for more details.

Long Press: Initiates PoE test.

• POWER / BACKLIGHT BUTTON

: Short Press: First short press turns the unit on, repeated short presses will

turn thebacklight on and off. Press the power button a second time to turn the LCD backlight on or off.

Long Press: Turns unit off.

NOTE: Unit will automatically power off after 5 minutes of inactivity, or after

60minutes when in Tone mode.

IN DETAIL

QUICK REFERENCE

RJ45

port F-connector

port

Termékspecifikációk

Márka:	Klein Tools
Kategória:	Mérőberendezések
Modell:	VDV Scout Pro 3

Szüksége van segítségre?

Ha segítségre van szüksége Klein Tools VDV Scout Pro 3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Mérőberendezések Klein Tools

Klein Tools CL810 Útmutató

14 Január 2025

Klein Tools CL710 Útmutató

14 Január 2025

Klein Tools ET19 Útmutató

2 Január 2025

Klein Tools NCVT-6 Útmutató

29 December 2024

Klein Tools VDV501-770 Útmutató

24 Szeptember 2024

Klein Tools ET18 Útmutató

21 Szeptember 2024

Klein Tools VDV211-048 Útmutató

21 Szeptember 2024

Klein Tools ET500 Útmutató

1 Szeptember 2024

Klein Tools ET510 Útmutató

1 Szeptember 2024

Klein Tools NCVT-3 Útmutató

1 Szeptember 2024

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések

Kern KFP 1500V40SM Útmutató

1 Április 2025

Kern ORA 6HB Útmutató

1 Április 2025

Kern ORA 3AB Útmutató

1 Április 2025

Kern ORA 10BA Útmutató

1 Április 2025

Kern ORA 3HB Útmutató

1 Április 2025

Kern ORA 1UB Útmutató

1 Április 2025

Kern KIP 3000V20LM Útmutató

1 Április 2025

Kern ORA 2PB Útmutató

1 Április 2025

Kern KFU 1500V20M Útmutató

1 Április 2025

Kern ORA 90BE Útmutató

1 Április 2025