Használati útmutató Kern ORA 2PB

Kern Mérőberendezések ORA 2PB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Kern ORA 2PB (2 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

1. Technical data

Measuring range

and Scales

Scale gradua-

tions Accuracy

Dimensions

Product

Net weight

Operating manual

Analogue refractometer

KERN & Sohn GmbH

KERN ORA 2 PB Urine/proteinPA/

Ziegelei 1

D-72336 Balingen

E-Mail: info@kern-sohn.com

Tel: +49-[0]7433-9933-0

Fax: +49-[0]7433-9933-149

Internet: www.kern-sohn.com

2. Description

1. Prism cover

2. Prism surface

3. Adjustment screw

4. Eyepiece with rubber eyeshade

5. Diopter adjustment ring

6. Optical tubes with rubber grip

Example scale on the

ORA 2 PB

ORA PB 5 Veterinary

Version 1.1 05 / 2016

Models KERN

ORA 2 PBPA/

0-12g/dl

1,000-1,050sg

1,3330-1,3600nD

0,2g/dl

0,002sg

0,0005

178x40x40mm 0,145kg

ORA PB5

2 42 4-1 g/dl

1,000-1,0 0sg6

0, g/dl1

0,00 sg1178x40x40mm 0,145kg

1,000-1,0 0sg60,00 sg1

Cont e n ts

1 Technical data.................................................................................................1

2 Description......................................................................................................2

3 General information 3 .......................................................................................

3.1 Intended use 3 ...................................................................................................

3.2 Warranty..........................................................................................................3

4 Basic safety information 4 ...............................................................................

4.1 Follow the instructions in the operating manual 4 .......................................

4.2 Warning ........................................................................................................4-5

5 Supplied items 5 ................................................................................................

6 Before the ﬁrst use 6 ........................................................................................

7 Use/measurement ........................................................................................6

7.1 Zero point calibration 7-8 ................................................................................

7.2 Additional advice 9 ............................................................................................

7.3 Measuring procedure ...............................................................................9-10

8 Cleaning and maintenance 11 ........................................................................

9 Storage ........................................................................................................ 11

10 Service ........................................................................................................ 12

11 Disposal ........................................................................................................ 12

12 Additional information 12 ................................................................................

7. Storage box

8. Pipette

9. Refractometer

10. Calibration liquid

(Distilled water)

11. Adjustment tool

12. Cleaning cloth

3. General information

3.1 Intended use

The refractometer is a measuring instrument for determining the refractive index of

transparent substances in the liquid or the solid state. It is used to observe the

behaviour of light as it passes from a prism with known properties to the substance

being tested.

Use of the refractometer for other purposes is contrary to its intended use and may

be hazardous. The manufacturer shall not be liable for any damages caused

by improper use.

3.2 Warranty

The warranty shall be void in the event of:

▸ Failure to observe the instructions in the operating manual

▸ Use for purposes other than those described

▸ Modiﬁcations or opening the device housing

▸ Mechanical damage and/or damage resulting from media, liquids,

natural wear and tear

4. Basic safety information

4.1 Follow the instructions in the operating manual

▸ Carefully read through the operating manual even if you have prior

experience with KERN refractometers.

▸ Every language version includes a non-authoritative translation.

The original German document is the deﬁnitive version.

4.2 Warning

▸ Do not let acids come into contact with skin or eyes. If acid comes into contact

with skin, ﬂush with copious amounts of water. Shower if larger areas of skin are

aﬀected.

▸ If acid comes into contact with eyes, keep the eyelid open and ﬂush the eye with

running lukewarm water from the outer corner to the inner corner. Flush eyes for

at least 15 minutes. Then consult a doctor or ophthalmologist immediately.

▸ Thoroughly clean the refractometer aer each use.

▸ The refractometer must not be exposed to extreme temperatures, high

mechanical stresses, strong direct sunlight or high humidity.

▸ This refractometer is not a toy. Keep out of reach of children.

▸ Make sure that you will not be hit by anything else while you are using the

refractometer, as this could cause serious eye injuries

▸ The rubber eyeshade may cause irritation when in prolonged contact with the

skin. If this happens, consult your doctor.

▸ Do not touch the lenses with your ﬁngers.

6. Before the ﬁrst use

Remove the protective ﬁlm (if present) from the prism surface [2] and check that

the rubber eye-cup

[4] is ﬁtted correctly.

7. Use/measurement

The refractometer can be used to quickly and accurately determine the refractive

index of transparent substances, liquid or solid ones. To ensure correct measure-

ment, the measuring device should be adjusted before measurements are carried

out. Please make sure your hands are dry before handling the measuring device.

5. Supplied items

Aer unpacking and before using the device for the ﬁrst time, check that all

listed parts have been supplied. Replace damaged or faulty parts immediately

and do not put them into operation.

▸ Refractometer

▸ Storage box

▸ Pipette

▸ Adjustment tool

▸ Cleaning cloth

▸ alibration Cliquid (Distilled water)

7.1 Zero point calibration

▸ Hold up the refractometer against a suﬃciently bright light source and look through

the eyepiece [5], holding the rubber eyeshade [4] closely against your eye/glasses.

▸ Rotate the eyepiece [5] to adjust it for your eyesight, until you can see the scale

sharply.

▸ Open the prism cover [1

▸ Thoroughly clean the prism [2] and the underside of the prism cover [1] using a so

cloth or soft paper (with alcohol if necessary) and wipe dry.

▸ Now apply a few drops of the calibration liquid

[10] onto the prism surface [2].

▸ lose the prism cover C[1]. The amount of fluid should be sufficient to moisten most

of the prism surface. There should not be any air bubbles between the measuring

prism [2] and prism cover [1]

▸ Wait about 30 seconds to allow the temperatures of the fluid and prism to

equalise.

▸ Look through the eyepiece

[4] while pointing the refractometer‘s prism surface [2]

at a bright light source.

▸ Through the eyepiece

[4], you will see a bright and a blue ﬁeld. The boundary line

between them shows the value on the scale which is also visible measured

through the eyepiece [4]

▸ Use the supplied adjustment tool

[11] to turn the adjustment screw [

behind

the prism surface [2

]

(under the rubber cap ), and adjust the scale so that the

measuring device is optimally set up by moving the boundary line upwards or downwards.

Calibration value ORA 2PA/2PB: 1,000 sgU (Urine) / 1,333 nD (Refractive index)

Calibration value ORA 5PB: 1,000 sgU (Urine cat/dog)

▸ Repeat step 4 (cleaning)

Important!

The ambient/room temperature and the sample temperature influ-ence

the refractometer measuring result. The scales of the refractometer

models, which have " B" in its name, are designed for an ambient P

7.2 Additional advice

It is important that the samples being measured are representative samples. For

samples that evaporate easily, measurements should be carried out quickly. The

samples should be at the same temperature as the measuring instrument in order

to achieve an accurate result.

7.3 Measuring procedure

▸ Make sure your hands are dry before handling the refractometer.

▸ Open the prism cover [1]

and use the supplied pipette [8] to apply a few drops of

the sample liquid

] onto the prism surface [2]. Close the prism cover

[1]. Spread

the liquid evenly by pressing down on the prism cover [1] and elimi-nate any air

bubbles present.⇨

▸ Hold the device horizontally and wait about 30 seconds

(

for optimal tempera-ture

equalisation between the sample and device

▸ View the measurement scale through the eyepiece

[4]. Point the prism surface [2]

of the refractometer at a bright light source while doing this.

▸ Rotate the adjustment ring

[5] on the eyepiece [

4] to adjust the focus.

▸ The boundary line will move on the measurement scale depending on the concen-

tration. This bright/dark boundary line shows the result on the scale.

▸ Carefully clean the supplied pipette [8] and the refractometer after carrying out

the measurement.

Important!

Aer every measurement, use a lint-free, absorbent cloth to remove

the ﬂuids from the prism surface [2] and prism cover [1]. Then

carefully clean the prism and prism cover using a cloth moistened

with water or if necessary alcohol, and dry both parts using a so,

dry and lint-free cloth. Avoid rubbing the prism [

8. Cleaning and maintenance

Clean the refractometer using a so, lint-free cloth moistened with either water

or, if necessary, alcohol. Do not use any aggressive or abrasive cleaning agents.

Never immerse the device in water or hold it under running water. Never handle the

device with wet or damp hands.

Never touch the measuring prism [2] with hard tools made from plastic, wood,

rubber, metal, glass etc. Hard objects can quickly damage the relatively so prism

glass, resulting in measurement errors.

The refractometer is maintenance-free.

Cleaning should be carried out immediately before and aer each use of the refrac-

tometer to maximise its life and optimise measurement results.

9. Storage

Store the refractometer in a dry, non-corrosive environment, preferably

between 10 °C and 30 °C.

10. Service

Aer reading this operating manual, if you have any questions about setting up

or using the refractometer, or if any unexpected problem occurs, please contact

your dealer. The device housing may only be opened by trained service technicians

authorised by KERN.

11. Disposal

The packaging consists of environmentally friendly materials which can be disposed

of via local recycling facilities.

The device and storage box should be disposed of by the operator in accordance

with applicable national or regional regulations at the place of use.

12. Additional information

The product may diﬀer slightly from the illustrations. Avoid exposing the refracto-

meter to direct sunlight. Never bring the refractometer into contact with solvents.

temperature of +20 °C! If the measurements are carried out at a temperature other than +20 °C,

the results must be correspondingly corrected.

Refractometer models, which have " A" in its name, are equipped with an automatic P

temperature compensation (ATC). Between +10°C and +30°C measurement differences due to

temperature changes are automatically compensated.

Termékspecifikációk

Márka:	Kern
Kategória:	Mérőberendezések
Modell:	ORA 2PB

Szüksége van segítségre?

Ha segítségre van szüksége Kern ORA 2PB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Mérőberendezések Kern

Kern KFP 1500V40SM Útmutató

1 Április 2025

Kern ORA 6HB Útmutató

1 Április 2025

Kern ORA 3AB Útmutató

1 Április 2025

Kern ORA 10BA Útmutató

1 Április 2025

Kern ORA 3HB Útmutató

1 Április 2025

Kern ORA 1UB Útmutató

1 Április 2025

Kern KIP 3000V20LM Útmutató

1 Április 2025

Kern ORA 2PB Útmutató

1 Április 2025

Kern KFU 1500V20M Útmutató

1 Április 2025

Kern ORA 90BE Útmutató

1 Április 2025

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések

Uni-T UT220 Útmutató

3 Április 2025

Uni-T UT681C Útmutató

3 Április 2025

Uni-T UT216C Útmutató

3 Április 2025

Uni-T UT611 Útmutató

3 Április 2025

Uni-T UT210D Útmutató

3 Április 2025

Uni-T UT210C Útmutató

3 Április 2025

Uni-T UT210B Útmutató

3 Április 2025

Uni-T UT682 Útmutató

3 Április 2025

Uni-T UT275 Útmutató

3 Április 2025

Uni-T UT08A Útmutató

3 Április 2025