Használati útmutató Flyzone A6M2 Zero

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Flyzone A6M2 Zero (12 oldal) a Rádióvezérlésű játékok kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/12
FLZA4320 / FLZA4322
SPECIFICATIONS
Power
System:
1000kV 77g outrunner,
40A ESC,
3-45 2200 mAh battery
Wing Loading: 17-19 oz/ft2
[52-58 g/dm2]
Length: 37 in [940mm]
Radio: 6-8 channel
Wingspan: 45 in [1145mm]
Wing Area: 307 in2 [19.8 dm2]
Weight: 2.25-2.5 lb [1020-1130 g]
READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT
INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.
READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT
INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.
Flyzone® guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or
modification. In no case shall Flyzone’s liability exceed the
original cost of the purchased kit. Further, Flyzone reserves
the right to change or modify this warranty without notice.
In that Flyzone has no control over the final assembly or material
used for final assembly, no liability shall be assumed nor
accepted for any damage resulting from the use by the user of
the final user-assembled product. By the act of using the
user-assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the
place of purchase.
For warranty claims contact Hobbico Product Support:
Hobbico Product Support
3002 N. Apollo Drive Suite 1
Champaign IL 61822 USA
Telephone: (217) 398-8970 ext. 6
Fax: (217) 398-7721
E-mail: airsupport@hobbico.com
WARRANTY
I N S T R U C T I O N M A N U A L
© 2014 Flyzone,
® a Hobbico company.
®
Champaign, Illinois
(217) 398-8970
E-mail: airsupport@hobbico.com
2
INTRODUCTION
Thank you for purchasing the Flyzone Zero. Not only is the
Zero popular because of its history and attractive outlines,
the Zero also happens to be one of those ideal scale subjects.
Its large wing and tail area, long tail moment and landing gear
placement make it a great yer. And even though this Zero
is relatively small at about 15% scale, all the good ying
attributes still translate down to this Flyzone model, making
it an easy, enjoyable fl yer!
For the latest technical
updates or manual
corrections scan the
QR code, or visit the
Flyzone web site at
www.flyzoneplanes.
com. Click the airplane
icon at the top of the
page, then select the
Zero when the airplane
page opens. A Tech
Notice box indicates
corrected or updated
technical information.
ADDITIONAL ITEMS REQUIRED
RTF Edition
Other than ordinary hobby tools, nothing else is required to
complete the RTF edition of the Zero, but some pilots may
choose to upgrade the included Smart charger to a more
advanced charger for reduced charge times, and switch from
the included 3S battery to a 4S battery for increased ight
performance. Refer to the charger recommendation and list of
batteries under the list of items required for the Rx-R edition.
Rx-R Edition
Radio System
To operate all eight functions of the Flyzone Zero (ailerons,
elevator, throttle, rudder, retracts, aps, releasable bomb,
lights) a minimum 7 channels is required. The lighting
harness may be connected to an additional, 8th channel,
or connected in-line to any other channel with a Y-harness
(FUTM4130). The Futaba 7C 7-channel 2.4 GHz FASST
airplane radio (FUTK7004) is suitable and capable of
operating all the functions.
LiPo Battery
The Flyzone Zero may be own with either a 3S or 4S 2200mAh
30C battery. On 3S the Zero ies enjoyably and scale-like,
but a 4S battery will increase speed and vertical performance.
Following are the batteries recommended:
3S 11.1V 2200 mAh 30C LiPo (GPMP0861)
4S 14.8V 2200 mAh 30C LiPo (GPMP0862)
For additional batteries more adhesive-back hook-&-loop
Velcro is also required:
Great Planes Velcro Hook & Loop 1x6" (GPMQ4480)
LiPo Charger
The Smart Charger included with the RTF is a safe way to
charge your LiPo battery, but it’s very basic and will take about
two hours to charge a normally depleted 2200 mAh battery. A
suitable upgrade over the Smart Charger (or a recommended
charger for the Rx-R version) is the DuraTrax Onyx 235 AC/
DC Advance Peak Charger (DTXP4235). The 235 features
110V AC or 12V DC input power, adjustable charge rate (to
charge the recommended 2200 mAh batteries in as little as
30 minutes) and an LCD digital display screen (so you can
see how much capacity it took to charge the battery handy
for calculating optimum ight time).
Y-Harness
A minimum 7-channel transmitter is required to independently
operate all the functions of the Flyzone Zero. To operate
both the aps and the releasable bomb with the included
TTX-600 6-channel transmitter, the ap and bomb release
servo must be connected with a Y-harness (FUTM4130 - not
included). To release the bomb, the aps will have to be
partially extended with the ap dial. Another option would
be to disconnect either of the two servos from the receiver
making that function inoperable.
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
ADDITIONAL ITEMS REQUIRED . . . . . . . . . . . . . . . . . . .2
RTF Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Rx-R Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Install the Tail Assembly . . . . . . . . . . . . . . . . . . . . . . . . .3
Set Up the Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Set Up the Flaps and Aileron . . . . . . . . . . . . . . . . . . . . .5
Mount the Releasable Bomb. . . . . . . . . . . . . . . . . . . . . .6
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Check/Set the Control Throws . . . . . . . . . . . . . . . . . . . .7
Mount the Propeller. . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Install the Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Check the C.G. (Center of Gravity) . . . . . . . . . . . . . . . . .8
Set a Flight Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
FLYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .10
Motor Safety Precautions . . . . . . . . . . . . . . . . . . . . . . .11
Academy of Model Aeronautics. . . . . . . . . . . . . . . . . . .11
REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . .11
TABLE OF CONTENTS
3
ASSEMBLY
Install the Tail Assembly
Halfway
Joiner
Collar
Torque rod
1. Install the horizontal stabilizer followed by the torque
rod and tail gear assembly be certain the torque rod and
the tail gear wire meet in the middle of the joiner collar, then
use a 1.5 mm hex driver with a drop of threadlocker on the
set screws to lock the assembly into position. If necessary,
adjust the tail gear wire in the joiner collar so the tail wheel
will be centered with the torque rod.
2. Install the vertical stabilizer while keying the torque rod
into the channel in the bottom of the rudder.
3. Fasten the horizontal and vertical stabilizer to the fuselage
with the M3 x 60 mm screw a No. 1 Phillips screwdriver ts
best and will properly key into the head of the screw, making
it easier to detect when the screw is getting tight. Use care
not to overtighten the screw turn until you feel resistance,
then go one additional turn. Tug on the vertical stabilizer to
make certain it is secure.

Termékspecifikációk

Márka: Flyzone
Kategória: Rádióvezérlésű játékok
Modell: A6M2 Zero

Szüksége van segítségre?

Ha segítségre van szüksége Flyzone A6M2 Zero, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Rádióvezérlésű játékok Flyzone

Útmutatók Rádióvezérlésű játékok

Legújabb útmutatók Rádióvezérlésű játékok