Használati útmutató WilTec AS20W

WilTec kompresszor AS20W

Olvassa el alább 📖 a magyar nyelvű használati útmutatót WilTec AS20W (7 oldal) a kompresszor kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/7
Instruction manual
Airbrush Compressor AS20W
with Vacuum Pump
34202
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
https://www.XPOtool.com Item 34202 Page 2
The Tool Experts
04 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up- -date, errors cannot be ruled out entirely.to
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Phone: +49 2403 55592–0
Fax: (+49 2403 55592–15)
https://www.XPOtool.com Item 34202 Page 3
The Tool Experts
04 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
CAUTION:
The use of this device is only allowed with a fault current protection switch with a triggering nominal
current up to 30 mA (according to VDE 0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities, or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or follow the instructions made by this person on how to correctly
use the device. Children should be supervised to ensure that they do not play with the device.
ATTENTION:
• The compressor head can become very hot.
• Perform a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
• Only use the device accordingly to the intended purpose stated in this manual.
• You are responsible for the safety of the working zone.
• If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but has to be replaced with a new one. This work can only be carried out by an electrician.
• The voltage of 230 V AC indicated on the type plate of the device must match the existent mains
voltage.
• Never lift, carry, or fix the device by using the power cable.
• Make sure that the electrical plug connection is protected from flood and moisture.
• Before working on the device (maintaining, repairing, cleaning it), pull out the plug.
• The user is responsible for complying with local safety and mounting regulations Ask an electri-
cian, if necessary.
• In case of device failure, repairs can only be carried out by an electrician.
NOTE:
• Choose the right compressor with the appropriate air volume and air pressure to match the
actual work requirements.
• Never expose the device to dust, acid, steam, explosive or flammable gases, or weather influ-
ences (rain, sun, fog, snow).
• The vacuum pump can only be operated in an appropriate environment (good ventilation, am-
bient temperature +5 –+40 ℃ ℃).
• Never use the compressor barefoot or with wet hands or feet.
• Never allow children to touch the switched-on compressor or to insert the plug. It may cause
burns or electric shocks.
• Do not open or damage any part of the compressor. If necessary, please contact your seller.
• Always release the water by opening the drain valve before not using the compressor for a long
time. Store the compressor in a well-ventilated place.
• Always wear protective goggles. Under no circumstances should you direct the airflow towards
your body or other persons’ bodies or animals.
• Never use the device in areas with steam or moisture or close to water.
• Switch off the compressor if you do not use it. Disconnect from mains before you repair, recon-
dition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the power

Termékspecifikációk

Márka: WilTec
Kategória: kompresszor
Modell: AS20W

Szüksége van segítségre?

Ha segítségre van szüksége WilTec AS20W, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kompresszor WilTec

WilTec

WilTec AS196A Útmutató

22 Augusztus 2024
WilTec

WilTec AF186A Útmutató

22 Augusztus 2024
WilTec

WilTec AF189 Útmutató

22 Augusztus 2024
WilTec

WilTec AF186 Útmutató

22 Augusztus 2024
WilTec

WilTec AS196 Útmutató

22 Augusztus 2024
WilTec

WilTec AS196AW Útmutató

22 Augusztus 2024
WilTec

WilTec AS20W Útmutató

22 Augusztus 2024
WilTec

WilTec AF189A Útmutató

22 Augusztus 2024

Útmutatók kompresszor

Legújabb útmutatók kompresszor

Hoffman

Hoffman VC171604X Útmutató

5 Április 2025
Panduit

Panduit CTAPR2/0-2 Útmutató

1 Április 2025
Panduit

Panduit LCA4-38-L Útmutató

1 Április 2025
Fuxtec

Fuxtec FX-E1CI20 Útmutató

13 Január 2025
POWERNAIL

POWERNAIL 445FS Útmutató

12 Január 2025
Güde

Güde 805/10/100 PRO Útmutató

12 Január 2025
Güde

Güde Airpower 220/8/24 Útmutató

12 Január 2025
Nilfisk

Nilfisk VHC200 Útmutató

12 Január 2025
Hyundai

Hyundai HY3200S Útmutató

10 Január 2025
Craftsman

Craftsman CMCC2520 Útmutató

10 Január 2025