Használati útmutató POWERNAIL 445FS

POWERNAIL kompresszor 445FS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót POWERNAIL 445FS (16 oldal) a kompresszor kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
Powernail
®
Model 445FS STAPLER with Power Roller
OPERATION AND MAINTENANCE MANUAL
MANUAL DE OPERACION Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
Read this manual before you use this PowerStapler®. Follow all safety warnings and
instructions. If you are uncertain about the operation of the stapler, call us directly
at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for help.
Please retain this information for future reference.
WARNING
REV 2021.03.24
The Model 445FS Stapler with Power Roller is a state-of-the-art pneumatic Powerstapler®
designed to bring fl exibility and speed to tongue & groove fl ooring installation.
The Model 445FS Power Roller is designed for use with 2", 1-3/4" and 1-1/2" (15.5 gauge)
Powerstaples® nails and can nail down from 3/4" to 5/8" tongue and groove hardwood fl ooring.
For superior pneumatic fl ooring tools, look to the company that has been the industry’s leader in
quality—POWERNAIL® COMPANY, INC.
INTRODUCTION
INDEX
LIMITED WARRANTY
POWERNAIL® Company, Inc. warrants to its customer, and to the fi rst end-use purchaser of
POWERNAIL fl ooring nailers purchased from an authorized POWERNAIL distributor, that
each serialized manufactured nailer by POWERNAIL®, for a period of 12 months from the date
of purchase, and with respect to the nailer/stapler body (specifi cally Models 200, 445, and 50P),
for a period of 10 years from date of purchase, (“warranty period”); shall be free of defects in
materials and workmanship and will meet POWERNAIL’s specifi cations in eff ect at the time of
Product shipment. POWERNAIL will repair or replace, at its option, any Powernailer® that does
not conform to this warranty. Claims must be made no later than fi fteen (15) days after the end
of the warranty period. POWERNAIL will perform all repair or replacements itself or through
its authorized contractors. POWERNAIL is not responsible for shipping, labor or other direct or
indirect costs. Damage caused by abuse, misuse, unusual or excessive wear is excluded. Repair
or modifi cation of the Products by unauthorized parties will void this warranty. The customer
is responsible for returning Products to POWERNAIL for verifi cation of nonconformance.
Warranties for Products not manufactured by POWERNAIL are limited to warranties provided
to POWERNAIL by the manufacturer of such product that are assignable to customer.
THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS, EXPRESS
OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
PURPOSE ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL POWERNAIL’S
LIABILITY FOR A WARRANTY CLAIM EXCEED THE PRICE PAID TO POWERNAIL
FOR THE NONCONFORMING PRODUCT, REGARDLESS OF THE FORM OR BASIS OF
THE CLAIM OR CAUSE OF ACTION.
Index..................................... 2
Warranty............................... 2 &16
Safety Instructions................ 3
Operating Instructions.......... 4
Parts & Service.................... 5-7
Drive Blade Change.............. 6
Seal Replacement................. 6-7
Parts List.............................. 8-9
Seal Locations Diagram....... 10
Schematic ........................... 11
Safety Labels........................ 12
Troubleshooting Chart......... 13
Depth Chart.......................... 14
Accessory Products.............. 15
SAFETY INSTRUCTIONS
Always use approved and when operating this stapler. The SAFETY GLASSES EAR PROTECTION
operator and others in the work area should always wear approved and eye protection FRONT SIDE
when operating this stapler. Eye protection will help guard against fl ying staples and debris, which could
cause severe eye injury.
EYE AND EAR PROTECTION should be used to prevent hearing damage when there are high noise
levels in the work area.
ALWAYS use ear plugs with a noise reduction rated at 29 db or highter at a construction site.
Stapler noise ratings are at LPA-1sd=90.6,
LWA-1sd=99.3 and LPA-1s,1m=86.3.
Stapler vibration rating: m/s2=3.05.
Always DISCONNECT THE AIR SUPPLY before making any adjustments, repairing, clearing jams or when the
stapler is not in use. Do not use on scaff olding or ladders and disconnect stapler from air supply when transporting
between installation areas.
Never attach the female end of a quick disconnect to the stapler. This will trap air inside the Stapler and permit it to
be discharged. Only the unrestricted male connection should be attached to the Stapler.
Stapler requires an air source that can continuously deliver 80 to 110 psi at 3-1/2 cubic feet of air per minute for
operation.
Normal air pressure should not exceed 120 psi or damage to the Stapler and seals may occur. Excess air
pressure can cause the Stapler to explode.
To prevent fi re or explosion, use only regulated compressed air—do not use bottled gases of any kind (no oxygen
or combustible gasses) to power this Stapler.
Stapler is intended for use installing wood fl ooring and is not to be used for purposes not specifi ed in the
operations manual.
Do not use any staples other than Powernail Powerstaples Staples which are specifi cally designed for use in
any Powerstapler. Powerstaples Staples are available in various lengths. Contact your Powernail Dealer for
Powerstaples Staples.
Use only Powernail replacement parts in the repair or maintenance of this stapler. Parts or repair services are
available from the manufacturer or from agents authorised by the manufacturer. Repairs should be carried out
only by trained service personel in the fi eld of fastener driving tools who will observe proper safety controls while
performing maintenace. Service personel should be qualifi ed to to asses the safe working condition of fastener
driving tools.
Never place any part of the body in the discharge path of the Stapler when air is connected to the Stapler. Always
make sure Stapler is empty of cleats before connecting air hose so as to prevent any accidental discharge from
occurring.
Never leave the Stapler unattended while it is connected to an air supply.
Whenever air is connected to the Stapler, keep body parts away from the nail discharge path.
Disconnect the air line before making adjustments or repairs on the Stapler. Only connect air to an
unloaded Stapler so as to prevent accidental discharge.
POWERNAIL COMPANY, INC.
1300 Rose Road, Lake Zurich, IL 60047 US
Phone: 1-800-323-1653 OR 847-847-3000
www.powernail.com

Termékspecifikációk

Márka: POWERNAIL
Kategória: kompresszor
Modell: 445FS

Szüksége van segítségre?

Ha segítségre van szüksége POWERNAIL 445FS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kompresszor POWERNAIL

POWERNAIL

POWERNAIL 445FS Útmutató

12 Január 2025
POWERNAIL

POWERNAIL 1890U Útmutató

11 Augusztus 2024
POWERNAIL

POWERNAIL BR50 Útmutató

10 Augusztus 2024
POWERNAIL

POWERNAIL 1845F Útmutató

7 Augusztus 2024
POWERNAIL

POWERNAIL 445LS Útmutató

7 Augusztus 2024
POWERNAIL

POWERNAIL 50F Útmutató

6 Augusztus 2024
POWERNAIL

POWERNAIL 50P FLEX Útmutató

4 Augusztus 2024

Útmutatók kompresszor

Legújabb útmutatók kompresszor

Fuxtec

Fuxtec FX-E1CI20 Útmutató

13 Január 2025
Güde

Güde 805/10/100 PRO Útmutató

12 Január 2025
Güde

Güde Airpower 220/8/24 Útmutató

12 Január 2025
Nilfisk

Nilfisk VHC200 Útmutató

12 Január 2025
Hyundai

Hyundai HY3200S Útmutató

10 Január 2025
Craftsman

Craftsman CMCC2520 Útmutató

10 Január 2025
Workzone

Workzone WZK 182 Útmutató

1 Január 2025
Livoo

Livoo TEA306 Útmutató

31 December 2025
Proviel

Proviel HK 8/24 Útmutató

27 December 2024
API Audio

API Audio Select T25 Útmutató

26 December 2024