Használati útmutató Wells B506

Wells Grill tányér B506

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wells B506 (24 oldal) a Grill tányér kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/24
p/n 2M-303673 Rev. G M162 131120
OPERATION
MANUAL
for
BUILT-IN
ELECTRIC
CHAR
BROILERS
Models:
B406
B446
B506
includes:
INSTALLATION,
USE and CARE
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
Model B-406
WELLS MANUFACTURING
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wellsbloomfield.com
Model B-446
162
162 2M-303673 OpManual for Built-In Electric Char-
Unless otherwise specified, all commercial cooking
equipment manufactured by WELLS MANUFACTURING is
warranted against defects in materials and workmanship for
a period of one year from the date of original installation or
18 months from the date of shipment from our factory,
whichever comes first, and is for the benefit of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE, AND/OR FOR DIRECT,
INDIRECT OR CONSEQUENTIAL DAMAGES IN
CONNECTION WITH WELLS MANUFACTURING
PRODUCTS. This warranty is void if it is determined that,
upon inspection by an authorized service agency, the
equipment has been modified, misused, misapplied, improp-
erly installed, or damaged in transit or by fire, flood or act
of God. It also does not apply if the serial nameplate has
been removed, or if service is performed by unauthorized
personnel. The prices charged by Wells Manufacturing for
its products are based upon the limitations in this warranty.
Seller’s obligation under this warranty is limited to the repair
of defects without charge by a Wells Manufacturing factory
authorized service agency or one of its sub-service
agencies. This service will be provided on customer’s
premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped to
the closest authorized service agency, transportation
charges prepaid, for service. In addition to restrictions
contained in this warranty, specific limitations are shown in
the Service Policy and Procedure Guide. Wells authorized
service agencies are located in principal cities. This warranty
is valid in the United States and Canada and void else-
where. Please consult your classified telephone directory,
your foodservice equipment dealer or contact:
Wells Manufacturing
10 Sunnen Drive, St. Louis, Missouri 63143
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
TABLE OF CONTENTS
SPECIFICATIONS
1
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 4
AGENCY LISTING INFORMATION 4
INSTALLATION 5
OPERATION 7
BROILER CHART 9
TROUBLESHOOTING SUGGESTIONS 10
CLEANING INSTRUCTIONS 11
PARTS & SERVICE 12—17
WIRING DIAGRAM 18—20
CUSTOMER SERVICE DATA 21
Thank you for purchasing this
Wells Manufacturing appliance.
Proper installation, professional
operation and consistent
maintenance of this appliance
will ensure that it gives you the
very best performance and a
long, economical service life.
This manual contains the
information needed to properly
install this appliance in a
manner which will ensure its
optimum performance.
NOTE: Refer to appropriate Installation Instructions for equipment dimensions, cut-out dimensions,
clearances, etc.
162 2M-303673 OpManual for Built-In Electric Char-
MODEL ELEMENT VOLTS KW AMPS PER LEG 3ø AMPS FIELD WIR-
ING
L1 L2 L3 NEUT. 1ø
B406 SINGLE ASSEMBLY
208
5.5
13 13 22 26 - 3ø 10 ga.
1ø 8 ga.
240 11 11 19 - 22.5 90 g
380 6.9 6.9 6.9 - -
415 7.6 7.6 7.6 - -
B446 SINGLE ASSEMBLY
208
5.5
12 22 14 26 - 3ø 10 ga.
1ø 8 ga.
240 10 20 13 - 22.5 90 g
380/415 7.6 7.6 7.6 -
B506 DUAL ASSEMBLIES 208 11 30 30 30 - - 3ø 8 ga.
1ø 4 ga.
240 26 26 26 45 90g -

Termékspecifikációk

Márka: Wells
Kategória: Grill tányér
Modell: B506

Szüksége van segítségre?

Ha segítségre van szüksége Wells B506, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Grill tányér Wells

Wells

Wells HDTG6030G Útmutató

16 Augusztus 2024
Wells

Wells HDCB2430G Útmutató

15 Augusztus 2024
Wells

Wells HDG6030G Útmutató

13 Augusztus 2024
Wells

Wells B506 Útmutató

12 Augusztus 2024
Wells

Wells B50 Útmutató

11 Augusztus 2024
Wells

Wells JG246U Útmutató

11 Augusztus 2024
Wells

Wells HDTG4830G Útmutató

11 Augusztus 2024
Wells

Wells HDCB1230G Útmutató

11 Augusztus 2024
Wells

Wells G246 Útmutató

10 Augusztus 2024
Wells

Wells B406 Útmutató

9 Augusztus 2024

Útmutatók Grill tányér

Legújabb útmutatók Grill tányér

Black Decker

Black Decker CG200 Útmutató

31 Március 2025
Braun

Braun MultiGrill 9 Pro CG9160 Útmutató

27 Március 2025
Ambiano

Ambiano PG-3 Útmutató

22 Március 2025
Hamilton Beach

Hamilton Beach 31612MN-MX Útmutató

16 Január 2025
Wet Sounds

Wet Sounds REVO 10 ADP XZ-B Útmutató

14 Január 2025
Bestron

Bestron KRC300BL Útmutató

14 Január 2025
Comelec

Comelec EG7403 Útmutató

14 Január 2025
Comelec

Comelec EG7404 Útmutató

14 Január 2025
Comelec

Comelec EG7401 Útmutató

14 Január 2025
Guzzanti

Guzzanti GZ 342 Útmutató

12 Január 2025