Használati útmutató Wavtech Link300.4 mini

Wavtech Vevő Link300.4 mini

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Wavtech Link300.4 mini (8 oldal) a Vevő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/8
www.wavtech-usa.com
Owner’s Manual
300W RMS 4-Channel Amplifier
link300.4mini
1
• DO NOT DRIVE WHILE DISTRACTED. Any function that requires your prolonged attention should not be
performed while driving. Always stop the vehicle in a safe location before performing any such function. Failure
to do so may result in an accident.
• KEEP THE VOLUME AT MODERATE LEVELS WHILE DRIVING. Excess volume levels can obscure sounds such
as emergency vehicle sirens or road warning signals and may result in an accident. Continuous exposure to high
sound pressure levels may cause permanent hearing loss. Use common sense and practice safe sound.
• FOR USE WITH 12V NEGATIVE GROUND VEHICLE APPLICATIONS ONLY. Using this product other than in its
designed application may result in fire, injury or product damage.
•MAKE THE CORRECT WIRING CONNECTIONS AND USE PROPER FUSE PROTECTION. Failure to connect
wiring correctly with appropriate gauge and fuse protection may result in fire, injury or product damage . When
replacing fuse(s), never exceed the specified rating. Ensure proper protection of all system power wiring and
install an external fuse (not included) with specified rating for each amplifier connected with the +12V lead at
the battery terminal.
• DISCONNECT THE NEGATIVE BATTERY TERMINAL BEFORE INSTALLATION. Failure to do so may result in
fire, injury or damage to the unit.
• D O NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables
to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as steering
wheel, brake pedals, etc. can be extremely hazardous.
• DO NOT DAMAGE VEHICLE SYSTEMS OR WIRING WHEN DRILLING HOLES. When drilling holes in the
chassis for installation, take precautions so as not to contact, puncture or obstruct brake lines, fuel lines, fuel
tanks, electrical wiring, etc. Failure to take such precautions may result in fire or an accident.
• DO NOT UTILIZE OR CONNECT TO ANY PART OF VEHICLE SAFETY SYSTEMS. Bolts, nuts or wires used in
the brake, airbag, steering or any other safety-related systems or fuel tanks should NEVER be used for
mounting, power or ground connections. Using such parts may disable control of the vehicle or result in fire.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
CAUTION
• STOP USE IMMEDIATELY IF A PROBLEM OCCURS. Failure to do so may result in personal injury or damage to
the product. Return it to your authorized Wāvtech dealer.
• HAVE AN EXPERT DO THE WIRING AND INSTALLATION. This unit requires special technical skill and
experience for wiring and installation. To insure safety and proper function, always contact the authorized
dealer where you purchased the product to have it done professionally.
• INSTALL THE UNIT SECURELY WITH SPECIFIED PARTS. Be sure to use only the included parts and specified
installation accessories (not included). Use of other than designated parts may damage this unit. Install the
unit securely so that it will not come loose during a collision or sudden jolt.
• ROUTE WIRING AWAY FROM SHARP EDGES AND MOVING PARTS. Arrange cables and wiring away from
sharp or pointed edges and avoid moving parts such as seat hinges or rails to prevent pinching or wear. Use
loom protection where appropriate and always use a grommet for any wiring routed through metal.
• NEVER RUN SYSTEM WIRING OUTSIDE OR UNDERNEATH THE VEHICLE. All wiring must be routed, secured
and protected inside the vehicle. Failure to do so may result in fire, injury or property damage.
• INSTALL THE UNIT IN A DRY AND VENTILATED LOCATION. Avoid mounting locations where the unit will
likely be exposed to high moisture or heat without adequate ventilation. Moisture penetration or heat buildup
may result in product failure. Always make sure the amplifier chassis temperature is safe before touching it.
• REDUCE GAIN AND SOURCE VOLUME TO MINIMUM LEVELS FOR INITIAL SYSTEM TUNING. Ensure
amplifier power is off before connecting signal cables and follow proper system gain setting procedures.
Failure to do so may result in damage to the amplifier and/or connected speakers.
WARNING
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or property damages.
Package Contents: Accessories Required for
Installation (not included):
Mounting Tabs
(pre-attached)
Spk Level
Input Terminals
Main Unit
Hex Wrenches
1+3/
2+4
CH1/2
INPUTCH FILTER LEVELTRIMCLIP
INPUTCH GAINCLIP
1/2 1+3/2+4
1/23/4
5V/20V 10V/40V OFF LPHP (Hz)50 500 (dB)-6 +6
CH3/4
MIN MAX
FILTER LEVELTRIM
OFF LPHP
(Hz)50 500 (dB)-6 +6
GAIN
MIN MAX
5V/
20V
10V/
40V
ŸRCA Cables or Signal Wire
ŸPower Supply & Speaker Wire
ŸIn-line Fuse Holder w/40A Fuse
ŸBattery Ring Terminal
ŸChassis Ground Terminal
ŸWire Crimp Connectors
ŸGrommets & Loom
Mounting Screws
2
Introduction
Welcome to Wāvtech, exceptional mobile audio products for audiophiles. Our products are
engineered from the ground up to provide a truly remarkable listening experience with superior
performance, sound quality and reliability. Built for the professional installer, our innovative
features enable maximum application coverage with ultimate system flexibility. Whether retaining
the factory receiver or utilizing an aftermarket source, our solutions are simply the best available
for unlimited sound system upgrades.
Features:
• 4/3/2-Channel Bridgeable
• Differential Balanced Inputs
• Dual Input Range with Ideal Gain Structure
• Variable Gain Adjustments with Clip LEDs
• Variable -12dB/oct. HP/LP Filters
• Independent Input Channel Select
• 2-way Summing with +/-6dB Level Trim
• Auto Turn-On via DC-Offset and Audio Detect
• Stop-Start Vehicle Compatible
• OEM Load Detect System Compatible
• Active Rollback Thermal Management
• Panel Mount RCA Inputs with Bal/Unbal Select
• Locking Detachable Spk Level Input Terminals
• 4AWG Insert Power/Ground Terminals
• 12AWG Insert Speaker Output Terminals
• Compact Chassis w/Detachable Mounting Tabs
Input Panel Connections & Settings
Auto Turn-On Detect Jumpers:
Œ
By default, the amplifier is set to
detect both DC-offset and audio
signals for turning itself on/off
automatically. These jumpers
allow either turn-on mode to be
defeated independently for cases
where only one turn-on mode is
preferred or to bypass both
modes when a switched +12V trigger
is available and connected to the remote turn-on (REM) terminal.
Load Jumpers: Each speaker level input channel has built-in loading to satisfy most OEM load
detect systems. These internal loading circuits can be bypassed (OFF) for channels where no
loading is required, such as when a speaker is still directly connected to the source.
Speaker Level Input Terminals: For up to four channels of speaker level input connections to
Ž
the source. When set to the 20V input range (default), audio signal from 1-20Vrms will produce
up to full power output from maximum to minimum gain. For factory amplifiers with more than
20Vrms output signal or if volume range is not sufficient with gains set at minimum, select the
40V input range, which will reduce the input sensitivity by half for signals up to 40Vrms.
RCA Input Bal/Unbal Jumpers: These jumpers select the RCA input configuration between
balanced (default) and unbalanced. Unbalanced connects the RCA shield to ground reference,
which may be useful in eliminating noise under certain source or system conditions. Both
jumpers (left/right) should be moved together if changed.
RCA Inputs: For up to four channels of RCA line level input connections to the source. When
set to the 5V input range, audio signal from 0.2-5Vrms will produce up to full power output
from maximum to minimum gain. For sources with more than 5Vrms output signal or if volume
range is not sufficient with gains at minimum, select the 10V input range, which will reduce the
input sensitivity by half for signals up to 10Vrms. Use quality interconnects to ensure stable
connection and minimize the possibility for induced noise.
Power/Protect Indicator: This LED will illuminate green when the amplifier is powered on and
‘
operating normally. If a shutdown occurs due to a detected fault, the LED will turn red. Once
the fault has been corrected or the condition has cleared, the amplifier will automatically
recover, indicated by the LED changing back to green.
Œ
Ž
‘

Termékspecifikációk

Márka: Wavtech
Kategória: Vevő
Modell: Link300.4 mini

Szüksége van segítségre?

Ha segítségre van szüksége Wavtech Link300.4 mini, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Vevő Wavtech

Wavtech

Wavtech link700.4plus Útmutató

14 Január 2025
Wavtech

Wavtech Link1000.5plus Útmutató

2 Január 2025
Wavtech

Wavtech Link300.4 mini Útmutató

24 Augusztus 2024
Wavtech

Wavtech Link500.1 mini Útmutató

24 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő

OSD Audio

OSD Audio Nero HTX4150 Útmutató

14 Január 2025
Pyle

Pyle PFMRA340BB.5 Útmutató

13 Január 2025
Behringer

Behringer NU6000DSP Útmutató

13 Január 2025
Denon

Denon DRA-935R Útmutató

13 Január 2025
Kenwood

Kenwood KMM-BT508DAB Útmutató

12 Január 2025
Boss

Boss DD-500 Útmutató

12 Január 2025
Kenwood

Kenwood KMM-BT328 Útmutató

12 Január 2025
Lanzar

Lanzar HTG889 Útmutató

12 Január 2025
TechniSat

TechniSat Skyrider Dome Útmutató

12 Január 2025
Xoro

Xoro HRS 2500 Útmutató

12 Január 2025