Használati útmutató Vivanco UR 44

Vivanco távirányító UR 44

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Vivanco UR 44 (19 oldal) a távirányító kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/19
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)
4102231235, Fax: +49(0)4102 31444, e-Mail: 1hotline@vivanco.de
UR 44+4 Universal Controller
(GB) Instructions
UR 44+4 Universal remote control
To control almost all TV sets, satellite receivers, DVD
players and recorders, CD players and other infrared-
controllable devices.
1 Important – please read
The Vivanco UR 44+4 is pre-programmed to control up to 8
devices, replacing damaged or lost original remote controls.
It controls the basic functions of the devices for which it has
been set and is not designed to replace all the functions of
the original remote controls. In order to be able to control
your devices, you must set the remote control as described
in the section "Code entry".
2 Inserting batteries
Open the battery compartment on the underside of the UR
44+4. To do so, lightly press the locking mechanism of the
battery compartment upwards, then insert 2 new AAA
alkaline batteries. Make sure that the polarity is correct: the
"+" and "-" markings on the batteries and in the
compartment must match. To check functionality, press the
PWR button. If everything is correct the red lamp flickers
when the button is pressed.
3 Code entry
The correct control codes can be set via direct code entry or
automatic code search.
Direct code entry
Using the enclosed code list, note the possible codes for the
device and the brand.
To set your TV set, proceed as follows:
1. Using the enclosed code list, find the codes to
control your brand of television (TV). It is
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)
4102231235, Fax: +49(0)4102 31444, e-Mail: 2hotline@vivanco.de
possible that there are several suitable codes
and you should find out the most suitable.
2. Switch on a program on your TV.
3. Press the button, hold it down and at theSET
same time press a device button, e.g. , untilTV*)
the red lamp comes on.
4. Then enter one of selected three-digit codes.
Key 0: please press key 10.
5. When the first and second number buttons are
pressed the lamp goes out briefly; when the third
is pressed it stays out.
6. Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 5 for other devices. If it is not okay, try
another code for the same brand.
The letters on the device buttons TV1/TV2*), SAT1/SAT2*),
DVD1/DVD2*), VCR1/VCR2*) are for your orientation only.
You can set each type of device under any of the buttons.
If you do not find a suitable code for a device, look for it
using the code search.
*): All 4 keys of the device can be assigned twice so that 8
different devices can be controlled altogether. If you press a
key once according to these instructions you can enter a
device code for the first assignment or control the first
device. If you press a key twice within one second you can
set the key for a second device, or control a second device
via the key.
Code search
To control a TV:
1. Switch on a program on your TV (on the TV
itself or with the original remote control).
2. Press the button, hold it down and at theSET
same time press a device button, e.g. , untilTV*)
the red lamp comes on.
3. Then press the button again briefly, theSET
lamp starts to blink.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)
4102231235, Fax: +49(0)4102 31444, e-Mail: 3hotline@vivanco.de
4. Press the button approx. every 2 seconds.PWR
5. When the TV switches itself off, briefly press the
device button ( ) to store the code found.TV*)
6. The lamp goes out and the search is ended.
7. Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 6 for other devices. Then press the device
buttons , or instead of .SAT*) DVD*) VCR*) TV*)
If it is not okay, continue searching as described
in 1 to 6.
Automatic code search
To control a TV:
1. Switch on a program on your TV (on the TV
itself or with the original remote control).
2. Press the device button with which you want to
control a device, e.g. .TV*)
3. Then press the button for approx. 5SET
seconds until the red lamp comes on.
4. Release the button and point the URSET
44+4at the device to be controlled. The UR 44+4
then begins to emit a test signal about every 2
seconds.
5. When the TV switches itself off, briefly press the
SET button to store the code found.
6. The lamp goes out and the search is ended.
7. Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 6 for other devices. Then press the device
buttons , or instead of .SAT*) DVD*) VCR*) TV*)
If it is not okay, continue searching as described
in 1 to 6.
4 Controlling devices
To control a specific device, first press a device button, e.g.
TV*) to control the TV set and then the required function
buttons.

Termékspecifikációk

Márka: Vivanco
Kategória: távirányító
Modell: UR 44

Szüksége van segítségre?

Ha segítségre van szüksége Vivanco UR 44, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók távirányító Vivanco

Vivanco

Vivanco vivcontrol 5 se Útmutató

23 Augusztus 2024
Vivanco

Vivanco UR12NB Útmutató

23 Augusztus 2024
Vivanco

Vivanco vivcontrol 3 se Útmutató

23 Augusztus 2024
Vivanco

Vivanco UR 1200 Útmutató

15 Augusztus 2024
Vivanco

Vivanco UR 81 Útmutató

14 Augusztus 2024
Vivanco

Vivanco 37600 Útmutató

14 Augusztus 2024
Vivanco

Vivanco Viv.Control 3 Útmutató

13 Augusztus 2024
Vivanco

Vivanco UR 1250 Útmutató

13 Augusztus 2024
Vivanco

Vivanco UR ZAP2 Útmutató

12 Augusztus 2024
Vivanco

Vivanco UR Z2 Útmutató

12 Augusztus 2024

Útmutatók távirányító

Legújabb útmutatók távirányító

Magnum

Magnum RC-328 Útmutató

9 Április 2025
Conrad

Conrad src 9200 Útmutató

3 Április 2025
Hama

Hama 40095 - 5in1 Útmutató

2 Április 2025
Hama

Hama 20312 - Easytip S9 Útmutató

1 Április 2025
Hama

Hama 20320 - Zapman 4in1 Útmutató

31 Március 2025
Sonos

Sonos Controller for iPhone Útmutató

29 Március 2025
Universal Remote Control

Universal Remote Control UR4U Útmutató

29 Március 2025
ELV

ELV SRC-7000 Útmutató

27 Március 2025
Metronic

Metronic ZAP 2 - 495383 Útmutató

27 Március 2025
Metronic

Metronic 495405z Útmutató

27 Március 2025