Használati útmutató Traxxas EZ-Peak Plus

Traxxas Akkumulátor töltő EZ-Peak Plus

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Traxxas EZ-Peak Plus (2 oldal) a Akkumulátor töltő kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Thank you for purchasing the Traxxas EZ-Peak Plus charger. This charger features exclusive
Traxxas innovations that make charging batteries easier and safer than ever. If you have any
questions or concerns about your charger, please contact our customer support team for
fast, friendly answers and solutions. Contact information is at the bottom of this page.
WARNING! For best charging results and your safety, it is essential that you read and
understand these instructions before using the charger. Charging and discharging batteries
has the potential for serious injury and damage to property. Use care when charging and
follow all instructions and cautions.
NiMH/LiPO FAST CHARGER INSTRUCT IONS
HKC14012-R02 150611
T R A X X A S . c o m
Traxxas, 6200 Traxxas Way, McKinney, TX 75070,
Phone: 1-888-TRAXXAS (Toll-free, US only) or 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
1. Power up the charger and connect the battery
2. Verify charge settings
3. Charging
Charging Traxxas iD LiPo Batteries
Charging Traxxas iD NiMH Batteries
Covers Part #2970
A. Battery iD Start/Stop
B. LiPo Charge Mode Select
C. Battery Type Select
D. Charge Rate Select
A
B
C
D
EF
G
H
Press and hold Start
button 2 seconds to start.
Press once to stop.
Battery type
selected must
match the battery
type shown on
the battery.
Battery type selected must match the battery type shown on the battery.
Charge
Status
Charge
Progress
Charge Rate
(Amps)
E. Charger Output Port (Traxxas High-Current Connector)
F. 2S/3S Lipo Balance Ports (pull to remove cover)
G. Charge Status LED
H. Charge Progress/Charge Rate LEDs
LiPo Charging Modes
Storage charge
Makes it easy to charge or discharge the
battery to the proper storage voltage. Use this
mode whenever the battery will be stored
unused for more than 7 days.
Fast charge
Fast charges your battery without balancing
your cells. Stops charging when the rst cell
reaches peak voltage. Depending on the
battery, this may reduce the charge time by a
few minutes.
Balance charge
Always balance charge your LiPo batteries
for maximum capacity, voltage, and battery
life. This is the default setting for Traxxas iD
batteries. The EZ-Peak Plus performs a balance
charge quickly and eciently.
4. Charge cycle complete
3. Charging
Press and hold Start
button 2 seconds to start.
Press once to stop.
4. Charge cycle complete
Charging
(flashing)
1. Power up the charger and connect the battery
2. Verify charge settings
Battery Type Charge Rate Start
Charge Rate StartBattery Type Charge Mode
Charging
(flashing)
Charge Cycle Progress Charge Cycle Progress
Cycle Complete
(solid)
Cycle Complete
(solid)
The EZ Peak Plus will
trickle charge your
NiMH battery at up to
200mA for 12 hours
after the charge cycle
is complete.
T R A X X A S . c o m
Traxxas, 6200 Traxxas Way, McKinney, TX 75070,
Phone: 1-888-TRAXXAS (Toll-free, US only) or 972-549-3000, Fax: 972-549-3011, e-mail: support@Traxxas.com
Warranty Information
Traxxas electronic components are warranted to be free from defects in materials and workmanship for
a period of 30 days from the date of purchase.
Limitations: Any and all warranty coverage does not cover replacement of parts and components
damaged by abuse, neglect, improper or unreasonable use, crash damage, water or excessive
moisture, chemical damage, improper or infrequent maintenance, accident, unauthorized alteration or
modification or items that are considered consumable. Traxxas will not pay for the cost of shipping or
transportation of a defective component to us. This warranty is limited to the charger only and does not
cover batteries, vehicles and other accessories used in conjunction with the charger.
Traxxas Lifetime Electronics Warranty
After the expiration date of the warranty period, Traxxas will repair electronic components for a
flat rate. Please visit Traxxas.com/support for a current schedule of warranty costs and fees. The
covered repairs are limited to non-mechanical components that have NOT been subjected to
abuse, misuse, or neglect. Products damaged by intentional abuse, misuse, or neglect may be
subject to additional charges. Traxxas liability, in no case, shall be greater than the actual purchase
price of this product. For replacement, product must be returned in brand new condition, with
packaging and intemized sales receipt.
Charging and handling precautions for all battery types:
• ALWAYS proceed with caution and use good common sense at all times.
• Charge only NiMH packs or 2S–3S LiPo battery packs.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children require adult supervision while
using this charger.
• DO NOT let any exposed battery contacts or wires touch each other. This will cause the battery to short circuit and
create the risk of fire.
• While charging, ALWAYS place the battery in a fire retardant/fire proof container and on a non-flammable surface
such as concrete.
• DO NOT operate the charger inside of an automobile.
• NEVER charge batteries on wood, cloth, carpet or on any other flammable material.
• ALWAYS charge batteries in a well-ventilated area.
• REMOVE flammable items and combustible materials from the charging area.
• DO NOT operate the charger in a cluttered space, or place objects on top of the charger or battery.
• If any battery or battery cell is damaged in any way, do NOT charge, discharge, or use the battery.
• Keep a Class D fire extinguisher nearby in case of fire.
• BEFORE you charge, ALWAYS confirm that the charger settings exactly match the type (chemistry), specification,
and configuration of the battery to be charged.
• DO NOT exceed the battery manufacturer’s maximum recommended charge rate.
• DO NOT disassemble, crush, short circuit, or expose the batteries or cells to flame or any other source of ignition.
• If a battery gets hot to the touch during the charging process, disconnect the battery from the charger and discontinue
charging immediately.
• DO NOT leave the charger and battery unattended while charging, discharging, or any time that the charger is
ON with a battery connected. If there are any signs of a malfunction or in the event of an emergency, unplug the
charger from the power source and disconnect the battery from the charger.
• ALWAYS unplug the charger and disconnect the battery when not in use.
• Never connect more than one battery at a time to the charger.
• DO NOT disassemble the charger.
• REMOVE the battery from your model or device before charging.
• DO NOT expose the charger to water or moisture.
• ALWAYS store battery packs safely out of the reach of children and pets.
• DO NOT charge batteries under ANY of the following conditions:
- Batteries that are hot to the touch.
- Batteries that are not expressly stated by the manufacture to be suitable to accept the power output (voltage
and amperage) the charger delivers during the charging process.
- Batteries that are damaged or defective in any way. Examples of damage or defects include, but are not limited
to, batteries with dented cells, damaged or frayed wires, loose connections, fluid leaks, corrosion, plugged vents,
swelling, cell deformity, impact damage, missing labels, melted components, or any other signs of damage.
- Battery packs that have been altered from original manufacturer configuration.
- Non-rechargeable batteries (explosion hazard).
FIRE HAZARD! CHARGING AND DISCHARGING BATTERIES HAS THE POTENTIAL FOR FIRE,
EXPLOSION, SERIOUS INJURY, AND PROPERTY DAMAGE IF NOT PERFORMED PER THE
INSTRUCTIONS . BEFORE USE, READ AND FOLLOW ALL MANUFACTURER’S INSTRUCTIONS,
WARNINGS, AND PRECAUTIONS. NEVER ALLOW CHILDREN UNDER THE AGE OF 14 TO CHARGE OR
USE LIPO BATTERIES WITHOUT THE SUPERVISION OF A RESPONSIBLE, KNOWLEDGEABLE ADULT.
WARNING! CAUTION! DANGER!
Important warnings for users of Lithium Polymer (LiPo) batteries
Lithium Polymer (LiPo) batteries are significantly more volatile than other rechargeable batteries.
ONLY use a Lithium Polymer (LiPo) balance charger with a balance adapter port to charge LiPo batteries. Never use
NiMH or NiCD-type chargers or charge modes to charge LiPo batteries.
DO NOT charge with a NiMH-only charger.
The use
of a NiMH or NiCD charger or charge mode will damage the batteries and may cause fire and personal injury.
Never charge LiPo battery packs in series or parallel. Charging packs in series or parallel may result in improper charger
cell recognition and an improper charging rate that may lead to overcharging, cell imbalance, cell damage, and fire.
• ALWAYS inspect your LiPo batteries carefully before charging. Look for any loose leads or connectors, damaged wire
insulation, damaged cell packaging, impact damage, fluid leaks, swelling (a sign of internal damage), cell deformity,
missing labels, or any other damage or irregularity. If any of the above conditions are observed, do not charge or use
the battery pack. Follow the disposal instructions included with your battery to properly and safely dispose of the
battery.
• Do not store or charge LiPo batteries with or around other batteries or battery packs of any type, including other LiPos.
• Store and transport your LiPo batteries in a cool dry place. Do not store in direct sunlight. Do not allow the storage
temperature to exceed 140°F or 60°C or the cells may be damaged and create a fire risk.
• Do NOT disassemble LiPo batteries or cells.
• Do NOT attempt to build your own LiPo battery pack from loose cells.
• ALWAYS proceed with caution and use good common sense at all times.
1. Connect the main connector and the balance connector to the charger 2. Enter Advanced Mode:
Simultaneously press and hold
the Start button and the Charge
Rate Select button for 2 seconds.
3b. Charging a LiPo battery
Charging Traxxas Batteries without iD in Advanced Mode
Advanced Mode is for users that have an in-depth knowledge of battery chemistry (types) and battery charging techniques. Advanced mode also allows you to adjust the
charge rate (current) for Traxxas iD batteries. If you do not understand the dierences in various battery types, then do not use Advanced Mode. Use the Traxxas Battery iD
system instead for safe, easy, and fast charging.
When a battery is connected for
charging that does not have Traxxas iD,
the red charge rate/progress LEDs will
sweep in a scanning motion. Advanced
Mode must be used for manual battery
type and charge rate
selection. The Start
button will not light
blue when there is no
Traxxas iD present.
LiPo mode should be
selected by default (green
LEDs). If the LiPo and NiMH
LEDs alternately blink then the
balance connector is either
disconnected or damaged.
Do not attempt to charge this
LiPo battery.
WARNING: DO NOT attempt to charge
LiPo batteries with missing or damaged
balance connectors. The EZ-Peak Plus
will default to LiPo mode charging when
a balance plug connection is detected.
If you fail to plug in the balance
connector, or attempt to charge a LiPo
battery with a damaged or missing
balance connector, you create the risk
of accidentally selecting to charge a
LiPo battery in NiMH mode resulting in
fire and possible injury to yourself and
others. Always make sure to select the
battery type that matches the connected
battery. If you do not understand what
this warning means, do not attempt to
use Advanced Mode on the EZ-Peak Plus.
Contact Traxxas for more information.
Error
Code Explanation Solution
The detected battery type
does not match the charger
conguration.
a. Press the Battery iD Start/Stop button to return to
charger conguration.
b. Verify that the battery matches the selected type
(LiPo or NiMH).
c. Verify that the balance connector is plugged into
the charger (if charging a legacy LiPo battery).
d. Inspect the battery for any signs of damage.
The battery or cell voltage
is too high or too low to
charge safely.
a. Verify that the balance connector is plugged into
the charger (if charging a legacy LiPo battery).
b. Disconnect the battery and check its condition.
Ensure it is within safe voltage levels.
The charge cycle
timed out without reaching
the target battery voltage.
Disconnect the battery and check its condition.
The Traxxas battery iD is
detected but is not readable
by the charger.
Contact Traxxas Customer Support.
The internal charger
temperature is too high.
Power o the charger and allow it to cool before
attempting to charge the battery again.
Charger Error Codes
If the charger detects an error during the charge process, the charge status LEDs will ash an error code.
LiPo Only
LiPo Only
Select Charge
Rate
3a. Charging a NiMH battery
Select Charge
Rate
Select NiMH
Battery Type (Red)
Press and hold
Start button
2 seconds to start.
Press once to stop.
Press and hold
Start button
2 seconds to
start. Press
once to stop.
Select Charge
Mode
Charge cycle
progresses as shown
in steps 3 and 4 for
iD NiMH charging.
Charge cycle
progresses as shown
in steps 3 and 4 for
iD LiPo charging.

Termékspecifikációk

Márka: Traxxas
Kategória: Akkumulátor töltő
Modell: EZ-Peak Plus

Szüksége van segítségre?

Ha segítségre van szüksége Traxxas EZ-Peak Plus, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Akkumulátor töltő Traxxas

Traxxas

Traxxas EZ-Peak Dual Útmutató

2 Szeptember 2024
Traxxas

Traxxas EZ-Peak Live Dual Útmutató

30 Július 2024
Traxxas

Traxxas EZ-Peak Live Útmutató

25 Július 2024
Traxxas

Traxxas EZ-Peak Plus Útmutató

4 Július 2024

Útmutatók Akkumulátor töltő

Legújabb útmutatók Akkumulátor töltő

Schwaiger

Schwaiger LAD230 531 Útmutató

9 Április 2025
Schwaiger

Schwaiger 658699 Útmutató

9 Április 2025
Schwaiger

Schwaiger LAD440 532 Útmutató

9 Április 2025
Ergotron

Ergotron 97-939 Útmutató

3 Április 2025
Ergotron

Ergotron YES35 Útmutató

3 Április 2025
Trust

Trust Maxo 25242 Útmutató

3 Április 2025
Ergotron

Ergotron LiFeKinnex Útmutató

3 Április 2025
Voltcraft

Voltcraft PB-19C Útmutató

31 Március 2025
Watson

Watson 9V-2BC Útmutató

30 Március 2025
ISDT

ISDT Q6 Lite Útmutató

26 Március 2025