Használati útmutató Sun Joe 20VIONLTE-CS10-RM
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sun Joe 20VIONLTE-CS10-RM (28 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/28
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions.
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 20ViONLTE-CS10-RM Form No. SJ-20ViONLTE-CS10-RM-880E-M-V1
RCORDLESS CHAIN SAW
20 VOLT MAX* | 10-INCH
SAVE THESE INSTRUCTIONS
1
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions.
A Division of Snow Joe
®, LLC
OPERATOR’S MANUAL
Model 20ViONLTE-CS10-RM Form No. SJ-20ViONLTE-CS10-RM-880E-M-V1
RCORDLESS CHAIN SAW
20 VOLT MAX* | 10-INCH
SAVE THESE INSTRUCTIONS
2
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Read all the instructions contained in this manual. Keep this
manual in a safe place, so that the information is available at
all times. If you give the equipment to another person, make
sure to provide these operating instructions. Basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
Intended Use
This cordless chain saw was designed and manufactured for
trimming and pruning tree limbs and branches and for cutting
smaller logs up to recommended 7.9 inch (20 cm), not to
exceed a max cut of 9.5 in. (24 cm) in diameter depending on
type of wood. All of the wooden objects intended to be cut
with this chain saw should be no thicker than the guide bar's
maximum cutting capabilities.
Improper Use
Any other use diering from the above mentioned applications
poses a serious hazard to the user and may damage both the
tool and your personal property. Examples of improper use
include, but are not limited to:
• Trimming hedges;
• Carving;
• Sectioning pallets, crates, and various packing materials;
• Sectioning furniture or other materials with nails, screws, or
other metal components;
• Butchering meat;
• Using the machine to lift, move, or split objects;
• Using the machine while fastened to xed supports.
Improper use of the machine will invalidate the warranty,
relieve the manufacturer from all liabilities. The user will
consequently be liable for all and any damage or injury to
himself/herself or others.
General Safety
mWARNING! When using electric/cordless yard tools,
basic safety precautions should always be followed to reduce
the risk of re, electric shock, and personal injury, including
the following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Remove adjusting keys and wrenches – Check that
adjusting wrenches are removed from the saw before
turning it on.
3. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
4. Do not use in dangerous environments – Do not use
power tools in damp or wet locations.
5. Do not use the chain saw in the rain.
6. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
7. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
8. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
9. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footwear, and close-tting clothing is
recommended when working outdoors with power tools.
10. Wear protective hair coverings to contain long hair.
11. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
12. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out microscopic particles is recommended.
3
13. Do not overreach – Keep proper footing and balance
at all times.
14. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
15. Reduce the risk of unintentional starting – Make sure
not press the trigger switch before inserting the battery.
16. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
17. Check for damaged parts – Before each use, repair, or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts, and any other conditions that
may aect the tool's operation.
18. Never leave tool unattended while it is running –
Turn the power OFF by directly removing the battery.
Do not leave the saw until the cutting bar comes to a
complete stop.
19. Avoid unintentional starting – Do not carry the cordless
chain saw with your nger on the switch.
20. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
21. Stay alert – Watch what you are doing. Use common
sense. Do not operate the chain saw when you are tired.
22. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.
Chain Saw Safety Warnings
• Keep all parts of the body away from the saw chain when
the chain saw is operating. Before you start the chain saw,
make sure the saw chain is not contacting anything. A
moment of inattention while operating the chain saw may
cause entanglement of your clothing or body with the
saw chain.
• Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle. Holding the
chain saw with a reversed hand conguration increases
the risk of personal injury and should never be done.
• Wear safety glasses and hearing protection. If you are
using the chain saw every day under normal conditions,
you can be exposed to a noise level of 85 dB (A) or higher.
Further protective equipment for head, hands, legs and
feet is recommended. Adequate protective clothing will
reduce personal injury by ying debris or accidental
contact with the saw chain.
• Do not operate the chain saw in a tree. Operation of a
chain saw while up in a tree may result in personal injury.
• Always keep proper footing and operate the chain saw
only when standing on a xed, secure and level surface.
Slippery or unstable surfaces such as ladders may cause
a loss of balance or control of the chain saw.
• When cutting a limb that is under tension, be cautious
of spring back. When the tension in the wood bers is
released, the spring-loaded limb may strike the operator
and/or throw the chain saw out of control.
• Use extreme caution when cutting brush and saplings.
The slender material may catch the saw chain and be
whipped toward you or pull you o balance.
• Carry the chain saw by the front handle with the chain saw
switched o and away from your body. When transporting
or storing the chain saw, always t the guide bar cover.
Proper handling of the chain saw will reduce the likelihood
of accidental contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and
changing accessories. An improperly tensioned or poorly
lubricated chain may either break or increase the chance
for kickback.
• Keep handles dry, clean and free from oil and grease.
Greasy, oily handles are slippery and can cause loss
of control.
• Cut wood only. Do not use the chain saw for any other
purpose. For example, do not use the chain saw to cut
plastic, masonry or non-wood building materials. Using
the chain saw in these incorrect ways could result in
serious damage to you and your tool.
Battery & Charger
Safety Instructions
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only
be guaranteed if undamaged cells are used. Incorrect handling
of the battery pack can cause cell damage.
IMPORTANT! Analyses conrm that incorrect use and poor
care of high-performance batteries are the main factors
responsible for personal and/or product damage.
mWARNING! Use only approved replacement batteries;
other batteries may damage the chain saw and cause it to
malfunction, which can lead to serious personal injury.
Termékspecifikációk
| Márka: | Sun Joe |
| Kategória: | Fűrészgép |
| Modell: | 20VIONLTE-CS10-RM |
Szüksége van segítségre?
Ha segítségre van szüksége Sun Joe 20VIONLTE-CS10-RM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Fűrészgép Sun Joe
7 Január 2025
31 December 2025
31 December 2025
14 Szeptember 2024
20 Augusztus 2024
17 Augusztus 2024
16 Augusztus 2024
13 Augusztus 2024
13 Augusztus 2024
3 Augusztus 2024
Útmutatók Fűrészgép
- Fűrészgép Milwaukee
- Fűrészgép Husqvarna
- Fűrészgép Dolmar
- Fűrészgép Parkside
- Fűrészgép Worx
- Fűrészgép Oregon Scientific
- Fűrészgép Bosch
- Fűrészgép AEG
- Fűrészgép Einhell
- Fűrészgép Florabest
- Fűrészgép Stihl
- Fűrészgép Yard Force
- Fűrészgép Ozito
- Fűrészgép Makita
- Fűrészgép Hyundai
- Fűrészgép Fuxtec
- Fűrészgép Flex
- Fűrészgép Rona
- Fűrészgép AL-KO
- Fűrészgép Scheppach
- Fűrészgép Ergotools Pattfield
- Fűrészgép EGO
- Fűrészgép Genesis
- Fűrészgép Güde
- Fűrészgép Hitachi
- Fűrészgép Remington
- Fűrészgép Toolcraft
- Fűrészgép Proviel
- Fűrészgép Cobra
- Fűrészgép Hilti
- Fűrészgép Black & Decker
- Fűrészgép Workzone
- Fűrészgép Gardena
- Fűrészgép Global
- Fűrészgép Fieldmann
- Fűrészgép PowerPlus
- Fűrészgép DEDRA
- Fűrészgép Metabo
- Fűrészgép Bavaria
- Fűrészgép RYOBI
- Fűrészgép Stiga
- Fűrészgép Hobart
- Fűrészgép Hammer
- Fűrészgép Solo
- Fűrészgép Proxxon
- Fűrészgép HiKOKI
- Fűrészgép Texas
- Fűrészgép Grizzly
- Fűrészgép Festool
- Fűrészgép McCulloch
- Fűrészgép Greenworks
- Fűrészgép Yato
- Fűrészgép Gardenline
- Fűrészgép Budget
- Fűrészgép Baumr-AG
- Fűrészgép Shindaiwa
- Fűrészgép McKenzie
- Fűrészgép Trotec
- Fűrészgép Zipper
- Fűrészgép Bebe Confort
- Fűrészgép Bavaria By Einhell
- Fűrészgép Herkules
- Fűrészgép Porter-Cable
- Fűrészgép Tanaka
- Fűrészgép DeWalt
- Fűrészgép Stanley
- Fűrészgép Hurricane
- Fűrészgép Silverline
- Fűrészgép Vonroc
- Fűrészgép Cotech
- Fűrészgép TAURUS Titanium
- Fűrészgép Alpha Tools
- Fűrészgép Pattfield
- Fűrészgép Luxor
- Fűrészgép Sovereign
- Fűrészgép Holzmann
- Fűrészgép Fein
- Fűrészgép Challenge Xtreme
- Fűrészgép ATIKA
- Fűrészgép Spear & Jackson
- Fűrészgép Cocraft
- Fűrészgép Craftsman
- Fűrészgép Maestro
- Fűrészgép Graphite
- Fűrészgép Ferm
- Fűrészgép Clarke
- Fűrészgép Draper
- Fűrészgép Tryton
- Fűrészgép ACG
- Fűrészgép Skil
- Fűrészgép Meec Tools
- Fűrészgép Dremel
- Fűrészgép Tacklife
- Fűrészgép Ferrex
- Fűrészgép Maktec
- Fűrészgép Bort
- Fűrészgép Power Craft
- Fűrészgép Troy-Bilt
- Fűrészgép Challenge
- Fűrészgép Topcraft
- Fűrészgép Martha Stewart
- Fűrészgép Gamma
- Fűrészgép Sterwins
- Fűrészgép Matrix
- Fűrészgép Kress
- Fűrészgép Duro
- Fűrészgép Prime3
- Fűrészgép Qualcast
- Fűrészgép Defort
- Fűrészgép IKRA
- Fűrészgép Truper
- Fűrészgép Masport
- Fűrészgép Echo
- Fűrészgép Bruder Mannesmann
- Fűrészgép Powerblade
- Fűrészgép Meister Craft
- Fűrészgép RIDGID
- Fűrészgép Łucznik
- Fűrészgép Batavia
- Fűrészgép Westfalia
- Fűrészgép Black Decker
- Fűrészgép Elu
- Fűrészgép Blucave
- Fűrészgép Plantiflor
- Fűrészgép Lux Tools
- Fűrészgép Kompernass
- Fűrészgép Triton
- Fűrészgép BGU
- Fűrészgép Avantco
- Fűrészgép Wolfcraft
- Fűrészgép Kreg
- Fűrészgép Sthor
- Fűrészgép Verto
- Fűrészgép Vulcan
- Fűrészgép Germania
- Fűrészgép FOM
- Fűrészgép Anova
- Fűrészgép Ergofix
- Fűrészgép King Craft
- Fűrészgép Maxx
- Fűrészgép Pro-Cut
- Fűrészgép Narex
- Fűrészgép Rikon
- Fűrészgép Elektra Beckum
- Fűrészgép Duro Pro
- Fűrészgép Toolson
- Fűrészgép Felisatti
- Fűrészgép Power Smart
- Fűrészgép Backyard Pro Butcher Series
- Fűrészgép Toledo
- Fűrészgép EFA
- Fűrészgép Erbauer
- Fűrészgép Exakt
- Fűrészgép Jonsered
- Fűrészgép Gude Pro
- Fűrészgép MSW
- Fűrészgép Backyard Pro
- Fűrészgép Royal Catering
- Fűrészgép Robust
- Fűrészgép Ultranatura
- Fűrészgép FIXIT
- Fűrészgép Einhell Bavaria
- Fűrészgép MyTool
- Fűrészgép Morrison
- Fűrészgép Garland
- Fűrészgép Prowork
- Fűrészgép Donau Elektronik
- Fűrészgép Chicago Pneumatic
- Fűrészgép Bestgreen
- Fűrészgép Maxbear
- Fűrészgép Evolution
- Fűrészgép Extralink
- Fűrészgép Stalco
- Fűrészgép Total
- Fűrészgép Turbo-Silent
Legújabb útmutatók Fűrészgép
8 Január 2025
8 Január 2025
8 Január 2025
7 Január 2025
6 Január 2025
6 Január 2025
4 Január 2025
3 Január 2025
3 Január 2025
3 Január 2025