Használati útmutató StarTech.com 167B-USBC-MULTIPORT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót StarTech.com 167B-USBC-MULTIPORT (2 oldal) a Overige computer accessoire kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: April 26, 2023 12:13 PM
Product Diagram (Side A)
(Side B)
Product ID
167B-USBC-MULTIPORT
USB-A & USB-C Hybrid Multiport Adapter - Dual HDMI - 3x USB-A
1
Component Function
1Built-in USB-C Host Cable Connect to a USB-C Port on a Host Computer
USB 3.2 Gen 1 (5Gbps)
2Tethered USB-C to USB-A
Adapter
Connect to the Built-in USB-C Host Cable and to a
USB-A Port on a Host Computer
USB 3.2 Gen 1 (5Gbps)
3USB-A Data Ports
Connect USB Peripheral Devices
USB 3.2 Gen 1 (5Gbps)
Supports up to 5 V/0.9 A (4.5 W) of Power
4HDMI Video Port #1
Connect an HDMI Display
HDMI 1.4
Up to 4K (4096x2160) 30Hz
5HDMI Video Port #2
Connect an HDMI Display
HDMI 1.2
Up to 1080p (1920x1200/1080) 60Hz
3
2
4
Package Contents
Multiport Adapter
Quick-Start Guide
5
1
2
Requirements
Host Computer
With available USB-C or USB-A Port
For the latest drivers, manuals, product information, technical specications, and
declarations of conformance, please visit:
www.StarTech.com/167B-USBC-MULTIPORT
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only
and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which
this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered
trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the
property of their respective holders.
PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by a 3-year warranty.
For further information on product warranty terms and conditions, please refer to .www.startech.com/warranty
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void
the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Driver Installation
Installation is automatic for Windows 10 & up, and Chrome OS, in most situations.
If the drivers do not auto-install, contact your IT administrator or department to
allow the driver installation. If you are using macOS or another supported operating
system, the latest drivers are available at:
www.StarTech.com/167B-USBC-MULTIPORT
Installation
1. (Optional) Connect the to the Tethered USB-C to USB-A Adapter Built-In USB-C
Host Cable.
2. Connect the to an available on Built-In USB Host Cable USB-A or USB-C Port
the .Host Computer
3. Connect the HDMI displays, to the located on the HDMI Output Ports Multiport
Adapter, using HDMI cables (sold separately).
4. Connect the USB peripherals to the , located on the Multiport USB-A Data Ports
Adapter.
Operation
Change Display Settings in macOS
Intel Based Mac Devices
To change the Screen Rotation or other Settings, use the operating system’s
Display Settings.
M1/M2 Based Mac Devices
To Mirror/Extend the connected displays, use the . The InstantView App
InstantView App InstantView App is accessible by Single Clicking the Icon in the
Menu Bar.
To change the Screen Rotation or other Settings, use the by RightInstantView App
Clicking/Double Clicking the Icon in the , which will InstantView App Menu Bar
bring up a variety of available settings.

Termékspecifikációk

Márka: StarTech.com
Kategória: Overige computer accessoire
Modell: 167B-USBC-MULTIPORT

Szüksége van segítségre?

Ha segítségre van szüksége StarTech.com 167B-USBC-MULTIPORT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Overige computer accessoire StarTech.com

Útmutatók Overige computer accessoire

Legújabb útmutatók Overige computer accessoire