Használati útmutató SEADA GM9

SEADA processzor GM9

Olvassa el alább 📖 a magyar nyelvű használati útmutatót SEADA GM9 (2 oldal) a processzor kategóriában. Ezt az útmutatót 12 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

GM9 Quick Start Manual

SD- -0 1 MA 32 V0

Note

1. Do not fix the device to any surface which is a heat source avoid over heating to

2. Do not cover the surface or ventilation grills of the device avoid over heating to

1. Verify the package contents

Please verify the package contents against the list below

1. GM9 Controller 1

2. Power Adapter 1

3. Ethernet Cable 1

4. GM9 Quick Start Manual 1

5. RS232 RJ45 to Serial Port Cable 1

6. Download Guide Card 1

If any of the items in the packing list are missing, please contact your reseller.

2. Set up the GM9

Power up the GM9 controller and connect the input and outputs to correct devices.

GM9

❶ ❷ ❸ ❹ ❺ ❻❼ ❽ ❾

1 4 – Power Switch – – HDMI Input 7 Ethernet RJ45 Port

2 – – Power Connector 5 USB 3.0 Ports 8 - Dipswitches

3 9 – – HDMI Outputs 6 RS232 RJ45 Port – RCA Audio Output

Figure 1

3. Connect through IP in ‘Device’

The default IP address for GM9 controller is Users need to change the IP address of 192.168.1.236.

control PC to the same IP group of G M9.

• Change the ‘Obtain an IP address automatically’ to ‘Use the following IP address’ to set up a static

IP address of TCP/IPv4 in Ethernet Properties

➢ IP address: any address between and except the address 192.168.1.2 192.168.1.253

which has been taken by the GM9

➢ Subnet mask: Default Gateway: 255.255.255.0, 192.168.1.254

• Once the control PC IP address having been set up, connect PC to the LAN RJ45 port of the GM9

controllers via a network cable and then press the button (or Connection -> Player

Connection Settings) and wait for the scan to complete Select the device and press .

connect

GM9 Quick Start Manual

SD- -0 1 MA 32 V0

4. Configuration

To configure the GM9, either press the System Setup button or navigate to Configuration - > System

Settings.

• Select the correct size screen from the Output

Selection dropdown menu at the top of the

screen. If you can’t find the monitor make and

model, you can click on and create a new one with your dimensions. Edit

• Add the number of screens you want to the video wall by

double clicking on the screens in the Add Outputs section.

Keep in mind that the GM9 can support up to 2 video

walls. After you are done press Add Outputs to Wall

• Once you add the screens make sure you rearrange them

to the specifications of your video wall from the

Row and section below and click Column

Rearrange.

• You can adjust the angle of the screens by selecti the degrees you want to rotate your screens and ng at

pressing for clockwise and for anti-clockwise. If you +–

want to fine tune and adjust in smaller increments. Press

“ ” and “ ” for increments of 1 degree< >

5. Displaying a signal

There are 2 ways to display a signal on the GM9 through the built- media player –in

or through the input.

• To play something through the built-in media player, navigate to the Video

Source Settings (Video -> Video Source Settings) or

• Upload a video by selecting “Send video file” to send one file or “Send video

folder” to

• send a whole folder. After you have uploaded your video just press the

button “Play video on screen”

• If you want to display the local input instead of the built-in media player,

then all you need to do is connect your source to the input port of the GM9

and use one of the many frames from the software. If you would not like to

have a frame and simply display the input, you can select the “invisible

frame ourth frame from top to bottom). To display a frame simply drag ”(f

and drop from the frame selection to the video wall. To delete a frame select

it and press “delete” on your keyboard or you can use the buttons on the toolbar

This quick start guide provides basic instructions for setting up SEADA GM9 Creative Video Wall controllers. For

additional information about how to use the controllers, please refer to the GM9 User Guide (SD- -0 )MA 31 , which

is available on .seada.co.uk. www

Termékspecifikációk

Márka:	SEADA
Kategória:	processzor
Modell:	GM9

Szüksége van segítségre?

Ha segítségre van szüksége SEADA GM9, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók processzor SEADA

SEADA SW2016 Útmutató

30 Augusztus 2024

SEADA SWP02 Útmutató

30 Augusztus 2024

SEADA SW2036 Útmutató

30 Augusztus 2024

SEADA SW8004 Útmutató

30 Augusztus 2024

SEADA SWP04 Útmutató

30 Augusztus 2024

SEADA G44 Útmutató

30 Augusztus 2024

SEADA SW4018 Útmutató

30 Augusztus 2024

SEADA GM9 Útmutató

30 Augusztus 2024

SEADA G4K Pro Útmutató

30 Augusztus 2024

SEADA G44-HDMI Útmutató

30 Augusztus 2024

Útmutatók processzor

Legújabb útmutatók processzor

Atlas Sound IPS-VPS Útmutató

3 Április 2025

Noise Engineering Sono Abitus Útmutató

19 Március 2025

Alto DI1 Útmutató

16 Január 2025

Alto DI4 Útmutató

16 Január 2025

Alto HPA6 Útmutató

16 Január 2025

Alto MAXI-Q PC Útmutató

16 Január 2025

Alto VOICE plus D Útmutató

16 Január 2025

Alto MP8 Útmutató

16 Január 2025

Alto MP8D Útmutató

16 Január 2025

Alto Terminator II Útmutató

16 Január 2025