Használati útmutató Scansonic A200 Minimate

Scansonic Audio rendszer A200 Minimate

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Scansonic A200 Minimate (36 oldal) a Audio rendszer kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/36
UK User Manual
DE Bedienungsanleitung
DK Brugervejledning
FR Guide d’instructions
IT Manuale di istruzioni
FI Käyttöohje
S Bruksanvisning
Introduction
Thank you for choosing A200, we hope our product
will bring you many years of enjoyment.
Please read this manual fully before unpacking
and installing the product.
Carton contents
During production and packing we have carefully
checked and inspected this amplier.
After unpacking please check for any damage
from transport. We recommend that you keep the
original cartonbox and packing material for any
future shipping.
In the cartonbox you will nd:
1 Input cable, RCA phono type, stereo
1 Input cable 3.5mm jack type, stereo
1 Mains cable
A200 installation
The amplier requires connection to the mains
power supply, so for your safety it is important that
you read this manual carefully.
A200 positioning
Place the amplier on a solid and plane surface,
avoid placement on carpets and other soft
surfaces.
Secure that there is plenty of ventilation around
the amplier, minimum 4” (100mm) free space
behind and above the amplier.
Do not cover the ventilation holes on the backside
of the amplier.
Connecting the A200
First switch off all equipment when connecting
your A200.
Connect the A200 line-in, optical or coaxial (2) with
your TV, smart phone, dockingstation, labtop etc.
Only connect one source.
Do not use use more than one input (line-in, optical
or coaxial) at the same time.
Connect the A200 SUBWOOFER LINE OUTPUT (4)
to a active subwoofer using a mono RCA phono
cable (optional).
Connect the A200 power cable (7) to the mains
voltage, and switch the POWER ON/OFF button (6)
to ON position.
Then turn the knob clockwise to turn on the A200.
For standby mode turn the knob counter clockwise
until you see the red ‘off’ text on the frontpanel of
your minimate.
The 5VDC CHARGE input (1) allow you to charge
your iPod, iPhone and other USB powered
products through the USB port – please note
that the port is only for charging, and not for
transmitting of data.
Connecting the A200 to you loudspeakers
First switch off the A200 on the POWER ON/OFF (6)
button on the rearpanel when connecting the A200
to your loudspeakers.
The binding posts on the output terminals
(5) accepts wire up to Ø 4mm or cables with
bananaplugs.
Make sure that positive terminal binding posts
on the A200 (marked + and coloured red) are
connected to the positive output terminal binding
posts on the loudspeaker and that the negative
terminals on the A200 (marked – and coloured
black) are connected to the negative output
terminal on the loudspeakers.
Operating the A200
The A200 is very easy to operate – after connection
of input source and loudspeakers switch on the
A200 on the POWER ON/OFF (6) button on the
rearpanel and turn the VOLUME knob on the front
panel clockwise to switch ON the amplier.
Adjust the volume by turning the VOLUME knob.
To switch OFF the A200 turn the VOLUME knob
counter clockwise.
Care and cleaning
We don’t recommend use of any solvents or
cleaners on A200 lacquered cabinets, the cabinet
surface usually only requires dusting or cleaning
with a soft cloth (do not use water).
Disconnect the unit from the mains supply if taken
out of use for a longer period.
Environmental information
The A200 comply with international directives
on the Restriction of Hazardous Substances
(RoHS) in electrical and electronic equipment and
the disposal of Waste Electrical and Electronic
Equipment (WEEE) - the crossed bin symbol
indicates compliance and that the products
must be appropriately recycled or processed in
accordance with these directives.
Owner’s manual
Troubleshooting
Basic troubleshooting
If the red ’off’ indicator lamp does not light up, check...
• thatthepowercordisrmlypluggedintothewalloutlet
• that the POWER switch on the rear panel is ON
• thatthemainsvoltageiscorrectandmatchingtheamplier
If no sound, check...
• that the Minimate™ is turned on (blue glow around knob)
• that the VOLUME control on the front panel is not all the way down
• thatthelinein,opticalorcoaxialinputcableisrmlypluggedin
• that the loudspeaker cables has been connected properly
If sound is distorted, check...
• that speaker cables are not contacting each other
• that volume is too high
• that input cables are not damaged
• that speakers are not damaged – try switch left and right speaker

Termékspecifikációk

Márka: Scansonic
Kategória: Audio rendszer
Modell: A200 Minimate

Szüksége van segítségre?

Ha segítségre van szüksége Scansonic A200 Minimate, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Audio rendszer Scansonic

Scansonic

Scansonic DA310 Útmutató

21 Augusztus 2024
Scansonic

Scansonic R2 FM radio Útmutató

19 Augusztus 2024
Scansonic

Scansonic i100 Útmutató

13 Augusztus 2024
Scansonic

Scansonic R3 BT Útmutató

10 Augusztus 2024
Scansonic

Scansonic BT 2.1 Stereo Transmitter Útmutató

8 Augusztus 2024
Scansonic

Scansonic A200 Minimate Útmutató

1 Augusztus 2024
Scansonic

Scansonic IN210 Útmutató

30 Július 2024

Útmutatók Audio rendszer

Legújabb útmutatók Audio rendszer

Lynx

Lynx LT-Madi Útmutató

5 Október 2024
Lynx

Lynx LT-ADAT Útmutató

26 Szeptember 2024
Ricatech

Ricatech RMC400 Útmutató

24 Szeptember 2024
Fusion

Fusion Apollo MS-ERX400 Útmutató

23 Szeptember 2024
Sitecom

Sitecom wl 060 wireless audio transmitter Útmutató

22 Szeptember 2024
Teac

Teac w600r Útmutató

17 Szeptember 2024
Elta

Elta 2309 Útmutató

28 Augusztus 2024
Samsung

Samsung MM-39 Útmutató

27 Augusztus 2024
Omnitronic

Omnitronic BOB series Útmutató

24 Augusztus 2024
Tascam

Tascam if-fw dm FIRE WIRE Útmutató

24 Augusztus 2024