Használati útmutató Sagem Photo Easy 155
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Sagem Photo Easy 155 (124 oldal) a nyomtató kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/124
S
User guide
Livret d’utilisation
Bedienungsanleitung
Manual del usuario
Manuale dell'utente
Gebruiksaanwijzing
SA
SA
SA
SASAGEM
GEM
GEM
GEMGEM
PHO
PHO
PHO
PHOPHOT
T
T
TTO EASY 155
O EASY 155
O EASY 155
O EASY 155O EASY 155
- I -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
1 WELCOME 1
2 DISCOVER YOUR PHOTO EASY 155 PRINTER 2
3 PREPARE YOUR PHOTO EASY 155 PRINTER 3
Connect the mains supply 3
First ribbon installation 4
To change the ribbon 5
Loading paper 6
4 PRINTING FROM A MEMORY CARD 7
Insert a memory card 7
5 USER INTERFACE 9
Print your photographs 10
Rapid printing 10
Example of rapid printing from a memory card 11
Create a contact sheet (index) 13
Prepare a series of photographs for printing (shopping
trolley mode) 14
Print from a camera (PictBrigde mode) 16
Print in DPOF (Digital Print Order Format) mode 17
Printing from a GSM mobile phone camera 18
Print starting from a bluetooth peripheral (optional) 19
Print from a PC (Personal Computer) 21
6 REPLACEMENT OF CONSUMABLES 23
7 MAINTENANCE 24
Cleaning the print head 24
Paper jam 25
Problems 26
Error messages 27
Technical data 29
8 GARANTEE 30
- II -
- 1 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
1 WELCOME
You have just acquired a SAGEM PHOTO EASY 155 printer, and we thank you for choosing our
product. With this high quality printer you can get the most out of your digital photos. In a few
simple steps you can produce photo prints identical to those from a professional developer, for
your personal use or to share with friends and family.
The easy-to-follow steps in this user guide will walk you through:
1. Switching on your PHOTO EASY 155 printer
2. Printing photographs stored on a memory card
3. Printing photographs transferred from a camera in a GSM mobile phone
4. Installing the image processing software and printer driver on a PC
5. Maintenance and troubleshooting of your PHOTO EASY 155 printer
The CD-ROM included with your kit contains an additional guide with instructions for using the
image processing software and printer driver on your PC.
Safety instructions and recommendations
• Do not install your PHOTO EASY 155 printer in a humid room (bathroom, laundry, kit-
chen, etc.), or within 1.50 m of a tap or water source, or outside. The printer should be ope-
rated within an ambient temperature range of 10 °C to 35 °C.
• Do not install your printer in a location where there is a noticeable amount of dust floating
in the air. Such dust can degrade the print quality of your photos.
• Only the power supply provided with the printer should be used. Connect this to the mains
in accordance with the installation instructions in this user guide and the information on the
identification label affixed to the power supply (voltage, current, mains frequency). As a
precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the
230V power supply. They should be placed near the device and should be easily accessible.
• Never open the cover of the film cartridge compartment during printing. This could
break the film and cause printer malfunction.
• Only use SAGEM consumables, if not you are likely to damage the equipment and invali-
date the guarantee. To obtain the references of the consumables (Refer to paragraph Repla-
cement of consumables, page -23).
• T Ehe CE m i i i t t m m i m tark ng rce t f es h ta he p od ct r u eet ts he a ein r qu re en s of he t ur p an Pa -o e r
liament and Council directive 1999/5/CE on telecommunications terminal equipment,
regarding safety and health of users, and regarding electromagnetic interference.
The declaration of compliance can be consulted on the site www.sagem.com category "sup-
port", or can be requested at the following address:
E - Customer relations department
4 rue du petit albi - 95800 Cergy Saint-Christophe - FRANCE
- 3 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
3 PREPARE YOUR P EHOTO ASY 155 PRINTER
C ONNECT THE MAINS SUPPLY
Remark: When installing your printer near a wall or some other object, keep an open space of at least 4 inches at the
back of the printer, to make sure the movement of the sheet of paper being printed is not obstructed.
Please refer to the safety instructions at the beginning of this user guide before making any
connections.
Insert one end of the mains lead into the corresponding socket of the power supply.
Connect the power supply to the printer as shown in the illustration below.
Plug the other end of the power supply mains lead into a wall socket.
Switch on the printer by pressing the " I " on the on/off switch located at the back of the
printer. The green light comes on and three lines are displayed on the screen.
Your printer features a SCSI Mass storage master USB connector (A) and a slave USB
connector (B). The latter is used for connection with a master terminal (PC, etc.).
Remarque : To obtain the list of devices compatible with this USB port (A), visit the site www.sagem.com.
B
A
- 4 -
F IRST RIBBON INSTALLATION
Remarque : Use DSR400 or DSR400T consumables only. These are specially designed to provide you with optimum print
rendering.
Switch on the printer. Wait 10 seconds for the printhead to lift, then:
1. Open the external flap located on the right-hand side of the printer.
2. Remove the protective foam.
3. Take the new ribbon out of its packaging and make sure that the film is stretched after removing
the card (A).
4. Install the ribbon in the position shown in the illustration below.
5. Lift the locking lever and push in the film cartridge until it touches the back of the compartment
the locking lever must be locked after insertion.
6. Close the external flap.
Warning - Never touch the film cartridge with your fingers. Make sure the cartridge is completely
inserted into the printer. Check that the green locking lever is correctly lowered.
Remarque : In the event of any difficulty, check that there are no foreign objects in the film cartridge compartment.
A
6
6
6
66
- 5 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
T O CHANGE THE RIBBON
Remarque : Use DSR400 or DSR400T consumables only. These are specially designed to provide you with optimum
print rendering.
For this purpose, the printer must read the chip card delivered with each consumable kit after any new kit
installation.
Switch on the printer. Wait 10 seconds for the printhead to lift, then:
1. Take the SIM card delivered with the ribbon and the photo paper. Insert it in the drive
located on the front panel of the printer. The SIM card is identified and read by the printer.
At the end of the procedure, "40 120 or " is displayed on the screen.
2. Remove the SIM card.
3. Take the new ribbon out of its packaging and make sure that the film is stretched after
removing the card (A).
4. Open the external flap located on the right-hand side of the printer.
5. Lift the locking lever and remove the used ink ribbon.
6. Install the ribbon in the position shown in the illustration below.
7. Lift the locking lever and push in the film cartridge until it touches the back of the com-
partment the locking lever must be locked after insertion.
8. Close the external flap.
Remark: If this last operation is not carried out, you will not be able to use the printer.
Warning - Never touch the film cartridge with your fingers. Make sure the cartridge is
completely inserted into the printer. Check that the green locking lever is correctly lowered.
Remark: In the event of any difficulty, check that there are no foreign objects in the film cartridge compartment.
A
6
6
6
66
7
7
7
77 8
8
8
88
- 6 -
L OADING PAPER
1 - Pull the paper tray out of the printer.
2 - Open a pack of paper with the protection sheet on the top, insert it in the paper tray, making sure the
rectangle reserved for postage stamps is on the outside of the tray, that is, towards you.
3 - Remove the protection sheet.
4 - Line up the tray with its compartment and push it in slowly until the locking system clicks.
Warning - handle paper sheets by their pre-cut edges, never allow your fingers to come into contact
with the shiny surface before printing.
Your SAGEM PHOTO EASY 155 printer is now ready to print your digital photographs.
Warning - protect consumable items against prolonged exposure to light, humidly, heat and dust.
Respect the operation conditions set out (Refer to paragraph Technical data, page -29).Only use
SAGEM brand consumable items designed for this printer. Make sure that a previously printed
photograph has not been slipped inadvertently into a packet of blank pages; this could damage the
ribbon of your printer.
Warning - Make sure that a previously printed photograph has not been slipped inadvertently into
a packet of blank pages; this could damage the ribbon of your printer.
Protection sheet
- 7 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
4 PRINTING FROM A MEMORY CARD
Your SAGEM PHOTO EASY 155 printer is designed to be used with or without a computer. This
chapter describes printer operation without a computer.
Refer to the technical data table at the end of thi user manual to check whether your memory card
is compatible with the printer. In the event of incompatibility, use a computer and the image
processing software supplied on the CD-ROM.
Warning - Small sized images, less than 80,000 pixels, cannot be printed from memory cards
(for example: an image size 320 x 240, equivalent to 76,800 pixels, will not be included in the
index). On the other hand, these photographs may be printed from a PC or by means of a wireless
IR link (or Bluetooth optional equipment).
I NSERT A MEMORY CARD
Insert your memory card into the corresponding slot, as shown in the illustrations below. Into the
case of a xD card, introduce initially the adapter provided into the left slit then insert the card in
the adapter.
Warning - SmartMedia, CONTACTS FACING UPWARDS.
Warning - The memory cards do not enter fully in the reader slot.
DO NOT USE FORCE UNDER ANY CIRCUMSTANCES.
If a card does not enter properly, remove it and check that you are introducing it in the
correct slot and with the right orientation.
Slot compatible with
Smart Media (SM),
Memory Stick (MS),
Standard Digital (SD)
Multi Media Card (MMC) formats
or
XD card with its adapter
Slot compatible with
Compact Flash format
- 8 -
Warning - Printing of picture by ascending order relatively to the date of the pictures on the memory
board will be achieved if parameters "dates and hour" have been set on your camera before the catch
of pictures. Otherwise pictures will be read and printed in a random order.
Card Slot Location
Smart Media
(SM) Left
Memory Stick
(MS) Left
Standard
Digital
(SD)
Left
Multi Media
Card
(MMC)
Left
xD card with its
adapter Left
CompactFlash Right
- 10 -
P RINT YOUR PHOTOGRAPHS
Your printer is switched on, and you have inserted a memory card, or you have transferred photographs
from a GSM mobile phone camera using the IR (infrared) link (or Bluetooth optional equipment).
The green light blinks while data are being transferred to the printer. After a few seconds, the number
of photographs found on the memory card or in the digital camera, or transferred from the GSM mobile
phone camera, is displayed on the screen. The light stops blinking.
Your photos are printed in four stages. The printer first prints the three colours: yellow, magenta and
cyan in that order, then deposits a protective film on the sheet of papier, and finally ejects the photo.
The colour of the light shows the printer status:
Steady green: printer ready, on standby,
Blinking green: data being tranferred,
Steady red: incident: refer to the end of this user guide.
Remark: To enable you to handle your photographs under the right conditions, the size of the sheets of paper is greater
than the printed surface and the two lateral edges are pre-cut.
After printing, do not tear these edges abruptly, fold along the dotted line several times and then gently
tear off the edges.
Tips - The edges can be removed on a number of photos at a time by superimposing them on each
other.
RAPID PRINTING
Select the number of the photograph required using the or keys.
Press the key to set the number of copies.
Press the key to select print format.
You may select a predefined format to print the photographs:
• Print your photograph in format 10 x 15 cm full page, no border .
• Print your photograph in format 10 x 15 cm with a white border .
• Print your photograph in format 10 x 13 cm .
• Print 2 photographs per page .
• Print 4 photographs per page .
- 11 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
• Print 20 photographs per page (contact sheet or index) .
Once the selection is made, press the key to start printing.
If printing is interrupted due to a lack of paper, paper jam or empty film cartridge, the
printing operation may be restarted where it was interrupted by pressing the key
after the necessary replacement or defect correction is performed.
Idea - Using the pre-printed reverse side postcard you can quickly send your photograph to
friends, family, etc.
Tips - Hold the key down for 3 seconds to reinitialise the printer and return to the default
status, such as when inserting a card.
EXAMPLE OF RAPID PRINTING FROM A MEMORY CARD
The memory card contains 23 photographs. We want to print photograph number 3, 4 times on
the same sheet of paper.
Put the On/Off switch to " I ".
Insert the memory card into the correct printer slot.
After the analysis and recognition phase, the number of valid photos is displayed on the screen
and the green LED comes steady on.
C
- 12 -
Select photograph 3, using the key.
Press the key until the figure 4 is displayed (that is 4 copies).
Press the key until the 4 images/page graphic is selected.
The figure 1 should be displayed as the number of sheets necessary for the printing operation.
Press the key to start printing.
- 13 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
C )REATE A CONTACT SHEET (INDEX
After inserting the memory card, the number of valid photos is displayed on the screen..
Press the key until ALL is displayed on screen.
Select the format photographs per sheet format using the key.
In the example provided above, 2 sheets will be necessary to print 23 photographs.
Press the he key to initiate printing.
Idea - The contact plate is a simple way of displaying all the photographs on your memory card;
choose those to be printed using the number assigned to each of them
- 15 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
Select photograph 8, using the key, press key to add this to the shopping trolley
(the default number of copies is 1).
Select photograph 16, using the key, press key until the figure 2, corresponding
to the desired number of copies, is displayed.
Press the key to add this to the shopping trolley.
The number of sheets required is displayed to the left of the shopping trolley icon. Press the
key to start printing.
Remark: If you notice that you have made an error after having validated the selection with the key, press
the key again to cancel and redo the selection. This cancels only the most recent selection. It is
also possible to deselect all photographs by selecting ALL using the key and pressing the
key twice.
Tips - To rapidly add a series of consecutive photographs to the shopping trolley, select the
photograph with the lowest number and press and hold down the shopping trolley key .
- 16 -
Photographs will be automatically added to the shopping trolley one by one until the shopping trolley
key is released.
P RINT FROM A CAMERA (PICTB )RIGDE MODE
Your printer PHOTO EASY 155 SAGEM supports the standard PictBrigde, it thus allows the
impression of photographs starting from cameras compatible with this standard.
Read the documentation of the camera to check compatibility with the PictBrigde standard and to check
the connection with the printer.
Your SAGEM PHOTO EASY-155 printer supports the following functions:
Printing a photo.
Selecting photos and printing them several times on the same paper.
Printing from a DPOF-standard file.
Monitoring printing and especially the beginning, progress and end of the printing process.
Also, error messages likely to occur (no paper, paper jam, no ink, cover not closed, no cartridge,
fatal error).
Your SAGEM PHOTO EASY-155 printer does not support the following functions:
Image cropping.
Choosing a type of paper.
Providing additional data (for example, date and time), in addition to the photo to be printed.
Improving print quality or image.
Start PictBrigde mode printing
Check that camera is set up in PictBrigde mode.
After the analysis and recognition phase, the following screen appears
- 17 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
The print is launched automatically, the green light is flashing.
To leave PictBridge mode withdraw USB cable.
P RINT IN DPOF
(D ) IGITAL P ORINT RDER FORMAT MODE
This function lets you select the photographs to be printed on your camera, then print them on the
SAGEM PHOTO EASY 155 printer from a memory card. Your camera must comply with the
DPOF (Digital Print Order Format) standard. Refer to your camera documentation to find out if
it is compatible with this standard.
Select the required photographs on the camera (follow the instructions in the documentation of
your camera).
Remove the memory card from the camera and insert it into the correct slot of your SAGEM
PHOTO EASY 155 printer. This starts the data transfer. The DPOF logo on the printer screen is
activated and the number of printable photographs is displayed in the lower left-hand corner of
the screen.
Warning - Example: memory card that contains 15 photographs selected for printing.
Start printing by pressing the key.
To exit DPOF mode, press the key.
To switch back to DPOF mode, press and hold the key down for 3 seconds.
C
C
- 18 -
P RINTING FROM A GSM MOBILE PHONE CAMERA
Photographs taken with a GSM mobile phone equipped with a camera can be printed on the SAGEM
PHOTO EASY 155 printer. To do this, the photographs need to be transferred to the printer via an IR
(infrared) link between the 2 devices.
Switch on the SAGEM PHOTO EASY 155 printer (press " I " on the on/off switch).
Tips - GSM mobile phones with cameras work on low definition ; for a better quality of print we
suggest you print 2 or 4 photos per sheet.
Place your GSM mobile phone opposite the SAGEM PHOTO EASY 155 printer so that the IR
"windows" are facing each other and are not more than 30 centimetres apartPlace your GSM.
Warning - In an environment exposed to intense light, a distance of not more 10 centimetres
between the two infrared windows is recommended.
Select a photograph on your GSM mobile phone and start the IR ink transfer.
The message " Ir " blinks on the printer screen throughout the transfer operation.
- 20 -
Connect the Bluetooth adaptor (optional equipment) to the USB port (A) of your SAGEM
PHOTO EASY-155 printer.
Identification among hardware units is automatic.
Warning - The size of the photo or photos to be transferred to the SAGEM PHOTO EASY-155
printer must be less than 600 Kbytes. The photo format required is the JPEG format. An error message
"Err 75" will be displayed when the maximum storage capacity is reached.
To transfer new data to the SAGEM PHOTO EASY-155 printer, you must clear the memory. To do
this, press and hold the key for some time .
The message " bt " blinks on the printer screen throughout the transfer operation.
A
C
- 21 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
When the transfer is complete, the following information is displayed on the screen:
You can now:
• Start printing the transferred photograph, after setting the print format and number of copies
if required.
• Transfer another photograph, which will be added to those already stored in the printer. At
the end of each transfer, the total number of photographs stored is displayed on the printer
screen (the one with the highest number being the last one transferred).
P RINT FROM A PC (PERSONAL COMPUTER)
Your kit includes an installation CD-ROM containing a printer driver, image processing
software.
Make sure that your PC is compatible with the requirements as specified :
PC configuration required:
Pentium or equivalent,
OS : Windows 98 SE / 2000 / Me / XP,
128 MB DRAM or more,
150 MB available on hard disk,
USB port available.
Install the software
The SAGEM PHOTO EASY 155 software is installed in three steps: running the Install program,
restarting the computer, and performing the final printer installation.
Do not connect the printer to the PC before installing the printer driver. After you have
installed the software, a message will be displayed asking you to restart the PC. After
restarting you can connect the printer to the PC.
Insert the CD-ROM in the drive to start installation. A command window appears. Follow the
instructions displayed on the screen.
If the installation program does not start automatically, you can start it by double-clicking on the
"setup.exe" file located in the CD-ROM root directory.
- 25 -
ENGLISHFRANÇAIS
DEUTSCHESPAÑOLITALIANONEDERLANDS
P APER JAM
Follow this procedure if a sheet becomes stuck in the printer and cannot simply be pulled out:
Switch off your printer by pressing " O " on the switch behind the printer and disconnect
the mains cable .
Turn the printer upside down.
Remove the lower cover.
Gently and carefully remove the sheet causing the jam. Under no circumstances touch the
printhead.
Replace the lower cover and turn the printer right side up.
Switch on the printer and reconnect the mains cable.
Warning - Never use objects that could damage the printer (scissors, screwdriver, paper cutter,
etc.)
Termékspecifikációk
| Márka: | Sagem |
| Kategória: | nyomtató |
| Modell: | Photo Easy 155 |
Szüksége van segítségre?
Ha segítségre van szüksége Sagem Photo Easy 155, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók nyomtató Sagem
20 Augusztus 2024
21 Július 2024
6 Július 2024
Útmutatók nyomtató
- nyomtató Samsung
- nyomtató Sony
- nyomtató Fujitsu
- nyomtató LG
- nyomtató Olympus
- nyomtató Panasonic
- nyomtató Canon
- nyomtató StarTech.com
- nyomtató Sharp
- nyomtató Lenovo
- nyomtató Toshiba
- nyomtató HP
- nyomtató Roland
- nyomtató Digitus
- nyomtató Zebra
- nyomtató AVM
- nyomtató Fujifilm
- nyomtató Dell
- nyomtató Xerox
- nyomtató Primera
- nyomtató Polaroid
- nyomtató Kyocera
- nyomtató Ricoh
- nyomtató Epson
- nyomtató Huawei
- nyomtató Renkforce
- nyomtató Mitsubishi
- nyomtató Godex
- nyomtató Brother
- nyomtató Citizen
- nyomtató Microboards
- nyomtató Kodak
- nyomtató MSI
- nyomtató Dymo
- nyomtató Testo
- nyomtató Konica Minolta
- nyomtató Datamax O'Neil
- nyomtató Kogan
- nyomtató Honeywell
- nyomtató Velleman
- nyomtató D-Link
- nyomtató Fargo
- nyomtató TSC
- nyomtató Olympia
- nyomtató Tomy
- nyomtató Posiflex
- nyomtató ZKTeco
- nyomtató NEC
- nyomtató CUSTOM
- nyomtató Panduit
- nyomtató OKI
- nyomtató Equip
- nyomtató Pantum
- nyomtató Brady
- nyomtató Bixolon
- nyomtató CSL
- nyomtató Nilox
- nyomtató Seiko
- nyomtató Argox
- nyomtató Royal Sovereign
- nyomtató Lexmark
- nyomtató Olivetti
- nyomtató Intermec
- nyomtató Minolta
- nyomtató DNP
- nyomtató Triumph-Adler
- nyomtató Oce
- nyomtató Paxar
- nyomtató Metapace
- nyomtató Ultimaker
- nyomtató Ibm
- nyomtató Toshiba TEC
- nyomtató Frama
- nyomtató Builder
- nyomtató Star Micronics
- nyomtató Dascom
- nyomtató HiTi
- nyomtató GG Image
- nyomtató Vupoint Solutions
- nyomtató Elite Screens
- nyomtató DTRONIC
- nyomtató Phoenix Contact
- nyomtató Videology
- nyomtató Star
- nyomtató EC Line
- nyomtató Colop
- nyomtató Approx
- nyomtató Fichero
- nyomtató Raspberry Pi
- nyomtató Middle Atlantic
- nyomtató IDP
- nyomtató Evolis
- nyomtató Nisca
- nyomtató Epson 7620
- nyomtató Sawgrass
Legújabb útmutatók nyomtató
10 Április 2025
10 Április 2025
10 Április 2025
10 Április 2025
10 Április 2025
10 Április 2025
9 Április 2025
9 Április 2025
9 Április 2025
3 Április 2025