Használati útmutató SAB mini COMET

SAB Rádióvezérlésű játékok mini COMET

Olvassa el alább 📖 a magyar nyelvű használati útmutatót SAB mini COMET (32 oldal) a Rádióvezérlésű játékok kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/32

570mm

153mm 135mm

Page 1

//www.goblin-helicopter.com

http:

Please read this user manual carefully, it contains instructions for the correct assembly of the model.

Please refer to the web site www.goblin-helicopter.com for updates and other important information.

VERY IMPORTANT

In the Manual bag you will find a product card with your serial number. Please take a moment to register

your kit online via our website:

It is extremely important that you take a moment to register your helicopter with us. This is the only way

to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other

important developments. SAB Heli Division cannot be held responsible for issues arising with your model

and will not provide support unless you register your serial number.

The Serial number is also engraved in the Aluminum Main Plate.

Thank you for your purchase, we hope you enjoy your new Goblin helicopter!

SAB Heli Division

6 – Installation of Carbon Rod and Tail Fin

7 – Installation of Swashplate Servos

8 – Head Sytem

9 – Assembly of the Main Module

10 – Installation of ESC, FBL,

RX Unit and Anti-Static System

1 – Serial Number

2 – Important Notes

3 – Components and Box

4 – Tail System

5 – Motor Assembly

INDEX

11 – Battery and Canopy

12 – In flight

13 – Maintenance

14 – Spare Parts

SPECIFICATIONS

Main rotor diameter : 626mm (with 280mm Main Blades)

Tail rotor diameter : 139mm (with 50mm Tail Blades)

Weight including standard electronics: 735g (excluding batteries)

COMPETITION SAB Direct Driver motor included

SAB 60 A ESC Included

Micro servos size ( Not Included )

Battery compartment: 34x42x75 mm

Chapter 1, Serial Number

Page 2

Chapter 2, Important Notes

IMPORTANT NOTES

*This radio controlled helicopter is not a toy.

*This radio controlled helicopter can be very dangerous.

*This radio controlled helicopter is a technically complex device which has to be built and handled very carefully.

*This radio controlled helicopter must be built following these instructions. This manual provides the necessary information to correctly assemble the model. It is necessary to carefully follow all the instructions.

*Inexperienced pilots must be monitored by expert pilots.

*All operators must wear safety glasses and take appropriate safety precautions.

*A radio controlled helicopter must only be used in open spaces without obstacles, and far enough from people to minimize the possibility of accidents or of injury to property or persons.

*A radio controlled helicopter can behave in an unexpected manner, causing loss of control of the model, making it very dangerous.

*Lack of care with assembly or maintenance can result in an unreliable and dangerous model.

Neither SAB Heli Division nor its agents have any control over the assembly, maintenance and use of this product. Therefore, no responsibility can be traced back to the manufacturer. You hereby agree to

release SAB Heli Division from

any responsibility or liability arising from the use of this product.

SAFETY GUIDELINES

*Fly only in areas dedicated to the use of model helicopters.

*Follow all control procedures for the radio frequency system.

*It is necessary that you know your radio system well. Check all functions of the transmitter before every flight.

*The blades of the model rotate at a very high speed; be aware of the danger they pose and the damage they may cause.

*Never fly in the vicinity of other people.

DAMAGE LIMITS

SAB HELI DIVISION SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT,

WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of SAB Heli Division exceed the individual price of the Product on which

liability is asserted. As SAB Heli Division has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use,

setup or assembly the user accepts all resulting liability. If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are advised to return this Product

immediately in new and unused condition to the place of purchase.