Használati útmutató SAB Goblin Kraken

Olvassa el alább 📖 a magyar nyelvű használati útmutatót SAB Goblin Kraken (48 oldal) a Rádióvezérlésű játékok kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/48
8 – Head Assembly
9 – Assembling of the modules
10 – Tail Group Assembly
11 – Tail Boom Assembly
12 – Low Side Frame Installation
13 – Landing Gear Installation
14 – Installation of The Motor
1 – Introduction
2 – Important Notes
3 – Note for Assembly
4 – Carbon Rod Assembly
5 – Transmission Group Assembly
6 – Swashplate Servos Assembly
7 – Frame Group Assembly
INDEX
15 – Installation ESC/FBL/RX
16 – Installation Batteries
17 – Installation Canopy
18 – In flight
19 – Maintenance
20 – Transmission Module
21 – Check list
22 – Spare Parts
http://www.goblin-helicopter.com
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site
www.goblin-helicopter.com
for updates and other important information.
VERY IMPORTANT
It is extremely important that you take a moment to register your helicopter with us. This is the only way
to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other
important developments. SAB Heli Division cannot be held responsible for any issues with your model
and will not provide support unless you register your model.
The Serial number is also engraved in the Aluminum part.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
You will find your serial number on the RED plate of the transmission module and on the product card
included with your kit.
Please take a moment to register your kit online via our web site at:
Page 1
1558mm
345mm
Typical Speed Controller: 12S, 160/200 A
Typical Motor : 12S, 500-560 Kv, 4525 - 4530 series,
(max 62 mm diameter, max 70 mm height).
Battery compartment: 12S, 4200/5500 mAh.
(max 56mmx70mmx320mm).
Suggested weight from 1400gr to 1700gr.
Minimum tail blades size: 105mm
Maximum tail blades size: 115mm
KIT Includes:
• 21T motor pulley (other pulley sizes available).
• 2 battery trays with straps.
190mm
• AIRFRAME weight:
2680 ( with blades, no battery, no electronics ).
• Main rotor diameter:
1558 mm (with 690 mm blades).
• Main blade length:
650 to 730mm.
• Tail rotor diameter:
284 mm (with 105 mm tail blades).
• Tail blade length:
105 to 115 mm.
GOBLIN KRAKEN TECHNICAL SPECIFICATIONS
• Cyclic Servos:
Standard size 40mm.
• Tail Servo:
Standard size 40mm.
• Main Rotor Ratio :
12.1 to 8.8 :1 ( 21T included: 10.4:1).
• Tail Rotor Ratio :
5.0-4.8:1 ( 27T included: 4.8:1 ).
• 690 mm main blades.
• 105 mm tail blades.
Page 2

Termékspecifikációk

Márka: SAB
Kategória: Rádióvezérlésű játékok
Modell: Goblin Kraken

Szüksége van segítségre?

Ha segítségre van szüksége SAB Goblin Kraken, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Rádióvezérlésű játékok SAB

SAB

SAB SG725 Útmutató

17 Augusztus 2024
SAB

SAB SG508 Útmutató

13 Augusztus 2024
SAB

SAB SG707 Útmutató

13 Augusztus 2024
SAB

SAB SG571 Útmutató

12 Augusztus 2024
SAB

SAB mini COMET Útmutató

11 Augusztus 2024
SAB

SAB SG715 Útmutató

11 Augusztus 2024
SAB

SAB Goblin Kraken Útmutató

10 Augusztus 2024
SAB

SAB SG711 Útmutató

9 Augusztus 2024
SAB

SAB SG570 Útmutató

8 Augusztus 2024

Útmutatók Rádióvezérlésű játékok

Legújabb útmutatók Rádióvezérlésű játékok