Használati útmutató Premier Mounts AST-2446

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Premier Mounts AST-2446 (2 oldal) a Projektor tartozék kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
AST-2446 Suspension Adapter
Page - 1 - Installation Instructions
9533-011-011-01
AST-2446 INSTALLATION INSTRUCTIONS
Single Stud Installation
Step 1. Secure the ceiling plate to the ceiling structure (see WARNING).
Step 2. Use suitable hardware (commercially available), depending on your installation environment, to secure
the two (2) mounting points found on the ceiling plate to the ceiling structure.
Step 3. Refer to ceiling adapter installation instructions.
The ceiling structure must be capable of supporting a weight of 400 lbs. If not, the ceiling must be reinforced. Proper
installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do
so could result in serious personal injury.
Make sure to hold the flat panel, or projector, securely and remove it from the mount to make the height adjustment
prior to loosening the adjustment screws. Loosen, remove, adjust then re-tighten the screws. Failure to do so could
result in injury and or damage to the flat panel or projector.
AST-2446 Suspension Adapter
Page - 2 - Installation Instructions
Concrete Surface Installation
Step 1. Secure the ceiling plate to the ceiling structure (see WARNING).
Step 2. Use suitable hardware (commercially available), depending on your installation environment, to secure the four (4) mounting
points found on the ceiling plate to the ceiling structure.
Step 3. Refer to ceiling adapter installation instructions.
The ceiling structure must be capable of supporting a weight of 400 lbs. If not, the ceiling must be reinforced. Proper
installation procedure by qualified personnel as outlined in the installation instructions must be adhered to. Failure to do
so could result in serious personal injury.
Make sure to hold the flat panel, or projector, securely and remove it from the mount to make the height adjustment
prior to loosening the adjustment screws. Loosen, remove, adjust then re-tighten the screws. Failure to do so could
result in injury and or damage to the flat panel or projector.

Termékspecifikációk

Márka: Premier Mounts
Kategória: Projektor tartozék
Modell: AST-2446

Szüksége van segítségre?

Ha segítségre van szüksége Premier Mounts AST-2446, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Projektor tartozék Premier Mounts

Útmutatók Projektor tartozék

Legújabb útmutatók Projektor tartozék

Metronic

Metronic 451073 Útmutató

27 Március 2025
Vogel's

Vogel's PPC 1585 Útmutató

27 Március 2025
Barco

Barco R9853370 Útmutató

14 Január 2025
Vogel's

Vogel's PPA 904 Útmutató

10 Január 2025
Chief

Chief RPMC198 Útmutató

1 Január 2025
Chief

Chief RPMA360 Útmutató

1 Január 2025
Chief

Chief RSMA342 Útmutató

1 Január 2025
Chief

Chief RSMA360 Útmutató

1 Január 2025
Chief

Chief RPMC266 Útmutató

1 Január 2025