Használati útmutató POWERNAIL 1845F
POWERNAIL
kompresszor
1845F
Olvassa el alább 📖 a magyar nyelvű használati útmutatót POWERNAIL 1845F (12 oldal) a kompresszor kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/12
REV 20.31.03
WARNING
OPERATION AND MAINTENANCE MANUAL
MANUAL DE OPERACION Y DE MANTENIMIENTO
MANUEL D’INSTRUCTIONS ET D’ENTRETIEN
Read this manual before you use this Powerstapler®. Follow all safety warnings and
instructions. If you are uncertain about the operation of the stapler, call us directly
at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for help.
Please retain this information for future reference.
2
The Model 1845F trigger-pull stapler is designed to bring Powernail quality and fl ooring
expertise to a pneumatic stapler. The Model 1845F is designed for use with 1” and 1-1/4”, 20
gauge L-Cleat Powernails®. The Model 1845F nails from 3/8” to 5/8” fl ooring through the use
of a FLEX adjustable foot assembly that can be adjusted to fi t different fl ooring profi les.
INTRODUCTION
INDEX
LIMITED WARRANTY
POWERNAIL® Company, Inc. warrants to its customer, and to the fi rst end-
use purchaser of POWERNAIL Model 1845F POWERSTAPLER purchased
from an authorized POWERNAIL distributor, that each serialized manufactured
Model 1845F POWERSTAPLER by POWERNAIL®, for a period of 12 months
from the date of purchase; shall be free of defects in materials and workmanship
and will meet POWERNAIL’S specifi cations in effect at the time of product
shipment. POWERNAIL will repair or replace, at its option, any Model 1845F
POWERSTAPLER that does not conform to this warranty. Claims must be made
no later than fi fteen (15) days after the end of the warranty period. POWERNAIL
will perform all repair or replacements itself or through its authorized distributors.
POWERNAIL is not responsible for shipping, labor or other direct or indirect
costs. Damage caused by abuse, misuse, unusual or excessive wear is excluded.
Repair or modifi cation of the Products by unauthorized parties will void this
warranty. The customer is responsible for returning Products to POWERNAIL
for verifi cation of nonconformance. Warranties for Products not manufactured
by POWERNAIL are limited to warranties provided to POWERNAIL by the
manufacturer of such product that are assignable to customer.
THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS,
EXPRESS OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR PURPOSE ARE EXPRESSLY EXCLUDED. IN NO
EVENT SHALL POWERNAIL’S LIABILITY FOR A WARRANTY CLAIM
EXCEED THE PRICE PAID TO POWERNAIL FOR THE NONCONFORMING
PRODUCT, REGARDLESS OF THE FORM OR BASIS OF THE CLAIM OR
CAUSE OF ACTION.
Index............................ 2
Warranty........................ 2
Operating the tool.......... 4-6
FLEX Foot Adjustment...5
Air Supply...................... 6
Safety Labels................. 7
Maintenance.................. 7
Clearing a jam............... 8
Troubleshooting Chart... 9
Schematic / Parts List.. 10-11
Nail Depth Chart............ 12
Phone Support............. 12
Web Site........................ 12
Powernail Company Info 12
Always DISCONNECT THE AIR SUPPLY before making any adjustments, repairing, clearing jams or
when the stapler is not in use. Do not use on scaffolding or ladders and disconnect stapler from air
supply when transporting between installation areas.
Never attach the female end of a quick disconnect to the stapler. This will trap air inside the stapler and
permit it to be discharged. Only the unrestricted male connection should be attached to the stapler.
Stapler requires an air source that can continuously deliver 70 to 120 psi at 3-1/2 cubic feet of air per
minute for operation. Normal air pressure should not exceed 120 psi or damage to the stapler and
seals may occur. Excess air pressure can cause the stapler to explode. Do not continue to use a tool
that leaks air or does not function properly. Notify your nearest Powernail representative if your tool
continues to experience functional problems.
To prevent fi re or explosion, use only regulated compressed air—do not use bottled gases of any kind
(no oxygen or combustible gasses) to power this stapler. Stapler is intended for use installing wood
fl ooring and is not to be used for purposes not specifi ed in the operations manual.
Do not use any staples other than Powernail® PowerStaples which are 18 gauge staples specifi cally
designed for use in any 18 gauge PowerStapler. PowerStaples are available in lengths of 7/8”, 1”,
1-1/8”, 1-1/4”, 1-1/2”. Contact your Powernail Dealer for the correct PowerStaples for the Model 1845F.
Use only Powernail replacement parts in the repair or maintenance of this stapler. Parts or repair
services are available from the manufacturer or from agents authorized by the manufacturer. Repairs
should be carried out only by trained service personel in the fi eld of fastener driving tools who will
observe proper safety controls while performing maintenance. Service personel should be qualifi ed to
assess the safe working condition of fastener driving tools.
Always make sure stapler is empty of staples before connecting air hose, so as to prevent any
accidental discharge from occurring. ONLY CONNECT AIR TO AN UNLOADED STAPLER.
Do not depress the trigger when loading. If the fasteners are jammed, disconnect the tool from the air
supply before you remove the jammed staples.
Never place any part of the body in the discharge path of the Stapler when air is connected to the
stapler. Never point the tool at yourself or others, even if the tool is not loaded. For safety,
keep out of reach of children. Never leave the stapler unattended while it is connected to an
air supply. Never disable, clamp or tape the safety trigger in an activated position.
Do not fi re into hard materials or attempt to use on hard or brittle material such as concrete,
steel or tile. Before using this tool, carefully check that all parts are working correctly. Do not use the
tool if it is not operating correctly, check for causes and adjust as necessary for proper operation. When
not in use, the tool should be cleaned, fully assembled and then stored in a dry location. This will extend
the life of the tool and reduce any oxidation.
When operating this stapler, the operator and others in the work area should ALWAYS
wear approved SAFETY GLASSES, with front and side eye protection. Eye protection
will help guard against fl ying nails and debris, which could cause severe eye injury.
EAR PROTECTION should be used to prevent hearing damage when there are high
noise levels in the work area. ALWAYS use ear plugs with a noise reduction rated at 29
db or higher at a construction site.
Do not operate this tool if it does not contain a legible WARNING LABEL.
SAFETY INSTRUCTIONS
3
Noise characteristic values in accordance with ENxx1:
A-weighted single-event sound pressure level at operator’s position: LPA, ls94dBA
A-weighted single sound pressure level:LpA,ls,lm89dBA
Vibration characteristic values in accordance with ISO 8662, PART II
Weighted root mean square acceleration 3.2m/s²
Termékspecifikációk
Márka: | POWERNAIL |
Kategória: | kompresszor |
Modell: | 1845F |
Szüksége van segítségre?
Ha segítségre van szüksége POWERNAIL 1845F, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók kompresszor POWERNAIL
11 Augusztus 2024
10 Augusztus 2024
7 Augusztus 2024
Útmutatók kompresszor
- kompresszor Milwaukee
- kompresszor AEG
- kompresszor Ultimate Speed
- kompresszor Einhell
- kompresszor Ozito
- kompresszor Makita
- kompresszor Hyundai
- kompresszor Xiaomi
- kompresszor Scheppach
- kompresszor Bimar
- kompresszor Unimac
- kompresszor Güde
- kompresszor Hitachi
- kompresszor Omnitronic
- kompresszor Toolcraft
- kompresszor Proviel
- kompresszor SPL
- kompresszor Black & Decker
- kompresszor Workzone
- kompresszor Global
- kompresszor Fieldmann
- kompresszor PowerPlus
- kompresszor DEDRA
- kompresszor Metabo
- kompresszor Osram
- kompresszor Biltema
- kompresszor Bavaria
- kompresszor HiKOKI
- kompresszor Greenworks
- kompresszor Yato
- kompresszor OKAY
- kompresszor Nilfisk
- kompresszor Zipper
- kompresszor Herkules
- kompresszor DeWalt
- kompresszor Stanley
- kompresszor Danfoss
- kompresszor Silverline
- kompresszor Vonroc
- kompresszor TAURUS Titanium
- kompresszor SereneLife
- kompresszor Holzmann
- kompresszor Cocraft
- kompresszor Craftsman
- kompresszor Hazet
- kompresszor Emax
- kompresszor Airpress
- kompresszor Ferm
- kompresszor Draper
- kompresszor Meec Tools
- kompresszor Auto Joe
- kompresszor Sun Joe
- kompresszor Tacklife
- kompresszor Steren
- kompresszor Power Craft
- kompresszor Topcraft
- kompresszor Outbac
- kompresszor Duro
- kompresszor Golden Age Project
- kompresszor Eventide
- kompresszor Truper
- kompresszor Abac
- kompresszor Eufab
- kompresszor Aerotec
- kompresszor Westfalia
- kompresszor Lindell Audio
- kompresszor Avantco
- kompresszor Arebos
- kompresszor Sthor
- kompresszor Anova
- kompresszor Pansam
- kompresszor Narvon
- kompresszor Freeman
- kompresszor Airman
- kompresszor Merlin
- kompresszor Pretul
- kompresszor Pro-Lift
- kompresszor Aomni
- kompresszor Numax
- kompresszor Full Boar
- kompresszor TOOLMATE
- kompresszor Duro Pro
- kompresszor California Air Tools
- kompresszor Ilsco
- kompresszor Hulk Power
- kompresszor WilTec
- kompresszor Cartrend
- kompresszor MSW
- kompresszor Creemers
- kompresszor Hamron
- kompresszor Robust
- kompresszor Alphacool
- kompresszor ExelAir
- kompresszor TJM
- kompresszor Prowork
Legújabb útmutatók kompresszor
8 December 2024
8 December 2024
8 December 2024
8 December 2024
7 December 2024
7 December 2024
6 December 2024
5 December 2024
5 December 2024
5 December 2024