Használati útmutató Pontec PondoCompact 800i

Pontec Pompa PondoCompact 800i

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Pontec PondoCompact 800i (92 oldal) a Pompa kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/92
1.
DE Gebrauchsanleitung
GB Operating instructions
FR Notice d'emploi
NL Gebruiksaanwijzing
ES Instrucciones de uso
PT Instruções de uso
IT Istruzioni d'uso
DK Brugsanvisning
NO Bruksanvisning
SE Bruksanvisning
FI Käyttöohje
HU Használati útmutató
PL Instrukcja użytkowania
CZ Návod k použití
SK Návod na použitie
SI Navodila za uporabo
HR Uputa o upotrebi
RO Instrucţiuni de folosinţă
BG Упътване за употреба
UA Посібник з експлуатації
RU Руководство по эксплуатации
PondoCompact
500i/800i/1200i/600/1200
37619-09-14_GA_PondoCompact 500i1 1 26.09.2014 10:22:14
- -
2
A
PCT0014
B
PCT0016
C
ARS0002
37619-09-14_GA_PondoCompact 500i2 2 26.09.2014 10:22:16
- -
3
D
PCT0015
37619-09-14_GA_PondoCompact 500i3 3 26.09.2014 10:22:16
- GB -
10
Installation and connection
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries due to operation of this unit in a swimming pond.
Protective measures:
Do NOT use this unit in a swimming pond.
Adhere to national and regional regulations.
1.
0.
How to proceed:
B
Set the flow rate:
Turning the socket clockwise: Increases the flow rate.
Turning the socket counterclockwise: Decreases the flow rate.
Fit the hose onto the outlet.
C
Install the pump fully submerged.
Ensure that the maximum permissible submersion depth of 1 m is not exceeded
Route the power cable so that it forms a loop below the power socket.
Start-up
NEVER allow the pump to run dry!
Possible consequences: The pump will be destroyed.
Protective measures:
Ensure that the pump is always fully submerged in the water.
Regularly check the water level.
Switching on: Insert the power plug into the socket.
The unit switches on immediately.
Switching off: Disconnect the power plug.
Remedy of faults
S
Malfunction Cause Remedy
The unit does not start up No mains voltage Check the mains voltage
Impeller unit blocked Clean
Insufficient fountain height Regulator closed too far Adjust regulator
Filter housing or impeller unit soiled, hose
blocked
Clean
Hose defective Replace
Hose kinked Route hose in a straight line
Impeller unit worn Replace impeller unit
Only PondoCompact 1200i/1200:
Unit switches off after a short running period
Filter clogged, unit switches off in the event of
overload
Clean
The unit will switch on again automatically as
soon as it has cooled down
Water temperature too high, unit switches off in
the event of overload
Adhere to max. permissible water temperature
( Technical Data)
The unit will switch on again automatically as
soon as it has cooled down
37619-09-14_GA_PondoCompact 500i10 10 26.09.2014 10:22:16

Termékspecifikációk

Márka: Pontec
Kategória: Pompa
Modell: PondoCompact 800i

Szüksége van segítségre?

Ha segítségre van szüksége Pontec PondoCompact 800i, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Pompa Pontec

Útmutatók Pompa

Legújabb útmutatók Pompa