Használati útmutató PoLabs PoKeys 57 CNC

PoLabs nincs kategorizálva PoKeys 57 CNC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót PoLabs PoKeys 57 CNC (20 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/20

PoKeys57CNC

User manual’s

Version: 26/9/2016

PoKeys user manual

www.poscope.com

Please read the following notes

1. All informaon included in this document is current as of the date this document is issued. Such informaon, however, is subject to

change without any prior noce.

2. PoLabs does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third pares by or

arising from the use of PoLabs products or technical informaon described in this document. No license, express, implied or otherwise,

is granted hereby under any patents, copyrights or other intellectual property rights of PoLabs or others. PoLabs claims the copyright

of, and retains the rights to, all material (soware, documents, .) contained in this release. You may copy and distribute the enre etc

release in its original state, but must not copy individual items within the release other than for backup purposes.

3. Descripons of circuits, soware and other related informaon in this document are provided only to illustrate the operaon of the

products and applicaon examples. You are fully responsible for the incorporaon of these circuits, soware, and information in the

design of your equipment. PoLabs assumes no responsibility for any losses incurred by you or third pares arising from the use of

these circuits, soware, or informaon.

4. PoLabs has used reasonable care in preparing the informaon included in this document, but PoLabs does not warrant that such

informaon is error free. PoLabs assumes no liability whatsoever for any damages incurred by you resulng from errors in or

omissions from the informaon included herein.

5. PoLabs devices may be used in equipment that does not impose a threat to human life in case of the malfunconing, such as:

computer interfaces, oce equipment, communications equipment, test and measurement equipment, audio and visual equipment,

home electronic appliances, machine tools, personal electronic equipment, and industrial robots.

6. Measures such as fail-safe funcon and redundant design should be taken to ensure reliability and safety when PoLabs devices are

used for or in connecon with equipment that requires higher reliability, for example: trac control systems, an-disaster systems,

ancrime systems, safety equipment, medical equipment not specically designed for life support, and other similar applicaons.

7. PoLabs devices shall not be used for or in connecon with equipment that requires an extremely high level of reliability and safety, as

for example: aircra systems, aerospace equipment, nuclear reactor control systems, medical equipment or systems for life support

(e.g. arcial life support devices or systems), and any other applicaons or purposes that pose a direct threat to human life.

8. You should use the PoLabs products described in this document within the range specied by PoLabs, especially with respect to the

maximum rang, operang supply voltage range and other product characteriscs. PoLabs shall have no liability for malfunctions or

damages arising out of the use of PoLabs products beyond such specied ranges.

9. Although PoLabs endeavors to improve the quality and reliability of its products, semiconductor products have specic characteriscs

such as the occurrence of failure at a certain rate and malfuncons under certain use condions. Further, PoLabs products are not

subject to radiaon resistance design. Please be sure to implement safety measures to guard them against the possibility of physical

injury, and injury or damage caused by re in the event of the failure of a PoLabs product, such as safety design for hardware and

soware including but not limited to redundancy, fire control and malfuncon prevenon, appropriate treatment for aging

degradaon or any other appropriate measures.

10. Usage: the software in this release is for use only with PoLabs products or with data collected using PoLabs products.

11. Fitness for purpose: no two applicaons are the same, so PoLabs cannot guarantee that its equipment or soware is suitable for a

given applicaon. It is therefore the user's responsibility to ensure that the product is suitable for the user's application.

12. Viruses: this soware was connuously monitored for viruses during producon, however the user is responsible for virus checking the

soware once it is installed.

13. Upgrades: we provide upgrades, free of charge, from our web site at www.poscope.com. We reserve the right to charge for updates or

replacements sent out on physical media.

14. Please contact a PoLabs support for details as to environmental maers such as the environmental compability of each PoLabs

product. Please use PoLabs products in compliance with all applicable laws and regulaons that regulate the inclusion or use of

controlled substances, including without limitaon, the EU RoHS Direcve. PoLabs assumes no liability for damages or losses occurring

as a result of your noncompliance with applicable laws and regulaons.

15. Please contact a PoLabs support at support@poscope.com if you have any quesons regarding the informaon contained in this

document or PoLabs products, or if you have any other inquiries.

16. The licensee agrees to allow access to this soware only to persons who have been informed of and agree to abide by these

condions.

17. Trademarks: Windows is a registered trademark of Microso Corporaon. PoKeys, PoKeys55, PoKeys56U, PoKeys56E, PoKeys57U,

PoKeys57E, PoKeys57CNC, PoKeys57CNCdb25, PoScope, PoLabs and others are internationally registered trademarks.

PoKeys user manual

www.poscope.com

Contents

1. Introducon ..................................................................................................................................... 7

2. Features ........................................................................................................................................... 8

3. Device hardware descripon 9 ...........................................................................................................

3.1. PoKeys57CNC connector pinout ............................................................................................ 11

Pin types ........................................................................................................................................ 11

Power supply ................................................................................................................................. 11

SSR (Solid State Relay) connector .................................................................................................. 12

Relays connector ........................................................................................................................... 12

Galvanically isolated I/Os .............................................................................................................. 12

LCD connector ............................................................................................................................... 12

Pendant connector ........................................................................................................................ 13

Encoders connector ....................................................................................................................... 15

ADC connector ............................................................................................................................... 15

Motor connectors 1-8 ................................................................................................................... 16

Axis switches connector ................................................................................................................ 16

Addional limit switches ............................................................................................................... 16

DB-25 (LPT-port) IO connector ...................................................................................................... 17

3.2. Pin types and specicaons .................................................................................................. 18

Type DI5P: Digital input with ltering ........................................................................................... 18

Type DO5: 5 V digital output ......................................................................................................... 18

Type DO5_D: 5 V digital output without resistor .......................................................................... 18

Type DIO33: 3,3 V digital input or output ..................................................................................... 19

Type OCOC: opto-coupled open-collector output ........................................................................ 19

Type OCSSR: open-collector output for SSR (Solid State Relay) .................................................... 20

Type REL: relay output .................................................................................................................. 20

Type AN33: 3.3 V analog input ...................................................................................................... 20

Type AN33F: 3.3 V analog input with low-pass lter .................................................................... 21

3.3. Status LEDs ............................................................................................................................ 21

4. Requirements ................................................................................................................................ 22

5. Technical specicaons ................................................................................................................. 23

5.1. PoKeys57CNC dimensions ..................................................................................................... 23

5.2. Environment specicaons ................................................................................................... 23

6. Installaon ..................................................................................................................................... 24