Használati útmutató Ozito PXSPSDMK-4182

Ozito Fűnyírógép PXSPSDMK-4182

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito PXSPSDMK-4182 (12 oldal) a Fűnyírógép kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/12
SPECIFICATIONS
Input: 18V x 2
Cutting Diameter: 470mm
Cutting Heights: 30 - 65mm, 6 position
No Load Speed: 3,300/min
Grass Catcher: 75 litres
Noise Rating: 95dB
Weight (Tool Only): 31.3kg
STANDARD EQUIPMENT
BRUSHLESS
STEEL DECK
MOWER
INSTRUCTION MANUAL
ozito.com.au
PXSPSDMS-0182
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0421
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way
• Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty Warranty excludes consumable parts, for example: blower tubes,
collection bag, shoulder strap and included accessories.
Brushless Lawn Mower
Handle Securing Set x 4, Cable
Clip
Mulching Plug
Side Ejector Adaptor
Safety Key, Cleaning Scraper
KNOW YOUR PRODUCT
1. ASSEMBLY
1. Side Ejector Cover
2. Battery Cover x 2
3. Grass Catcher Flap
4. Catcher Flap Locking Lever
5. Safety Switch
6. Start/Stop Lever
7. Drive Lever
8. Upper Handle
9. Speed Lever
10. Handle Securing Knob
11. Lower Handle
12. Cutting Deck
BRUSHLESS LAWN MOWER
123456 7 8
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
10
11
9
ASSEMBLY
12
1. Place the upper handle over the
upper ends of the lower handle.
1. Place the lower handle
onto the lower handle
bracket. From the handle
securing set, t the bolt
through mounting bracket
then through hole in lower
handle.
Fitting the Upper Handle
Fitting the Lower Handles
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
2. From the handle securing set, t
the bolts through the inner side of
the lower handle and then through
the holes in the upper handle.
3. Place a washer and handle
securing knobs over the
protruding ends of the bolts.
2. Secure with washer and knob.
3. Repeat this process on the other side for the second lower handle.
Note: There are 3 holes on each
end of the upper handle, select the
appropriate hole for the height of the
user.
13. Safety Key
14. Cleaning Scraper
15. Side Ejector Adaptor
16. Mulching Plug
13 14 15
ACCESSORIES
16
SETUP & PREPARATION
1. Lift up the grass catcher ap with
one hand and guide the catcher
with your other hand onto the
mower housing.
3. To remove, raise the grass
catcher ap and lift the grass
catcher out.
2. Lower the grass catcher and allow
it to sit in place. Lower the grass
catcher ap.
Fitting and Removing the Grass Catcher
WARNING! ONLY FIT AND REMOVE THE CATCHER
WHEN THE MOWER IS SWITCHED OFF AND THE
MOTOR HAS COME TO A STOP.
Note: The grass catcher ap is held
against the grass catcher by a spring.
WARNING! WHEN FITTING THE GRASS CATCHER
AFTER EMPTYING, ALWAYS ENSURE THERE IS NO
BUILD UP OF GRASS IN THE GRASS CHUTE.
Grass Catcher Indicator
The grass catcher is tted with an
indicator at the rear of the catcher to
help identify when to empty.
If the indicator drops down while
operating then the grass catcher is full
and needs emptying.
Fitting the Drive Speed Control Unit
1. Undo the 3 screws then lift that half
of the housing of the rest of the unit
and put aside
2. From the front of the mower,
position the drive speed
control unit on the upper
handle, as you do so the unit
must aline with the three
holes in the upper handle.
3. From the rear of the mower,
position the half removed in
step 1 on the upper handle
and fasten it to the unit again
with the 3 screws.
4. Attach the wire to the drive
lever.
1. Locate cord on lower handle. Push
the supplied cord clip over the lower
handle. Place the cable onto the
cord clip to secure in place.
Note: Care should be taken not to
pinch the cord when folding down the
handle.
Securing the Cord
Ensure the cord follows the handle
smoothly from the switch to the body of
the mower.

Termékspecifikációk

Márka: Ozito
Kategória: Fűnyírógép
Modell: PXSPSDMK-4182

Szüksége van segítségre?

Ha segítségre van szüksége Ozito PXSPSDMK-4182, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűnyírógép Ozito

Ozito

Ozito CPM-300C Útmutató

10 December 2024
Ozito

Ozito PXBMK-4047SP Útmutató

29 Augusztus 2024
Ozito

Ozito ELM-1230 Útmutató

13 Augusztus 2024
Ozito

Ozito ESA-1231U Útmutató

13 Augusztus 2024
Ozito

Ozito PXCLMK-218U Útmutató

11 Augusztus 2024
Ozito

Ozito PXCLMK-1318EU Útmutató

11 Augusztus 2024
Ozito

Ozito PXCSDMK-418U Útmutató

11 Augusztus 2024
Ozito

Ozito PXCLMK-418U Útmutató

10 Augusztus 2024
Ozito

Ozito LMPC-301U Útmutató

10 Augusztus 2024
Ozito

Ozito ELM-1536U Útmutató

7 Augusztus 2024

Útmutatók Fűnyírógép

Legújabb útmutatók Fűnyírógép

Makita

Makita PLM4630 Útmutató

29 Március 2025
Einhell

Einhell EM 1650 Útmutató

27 Március 2025
Solo

Solo GT 4235 Útmutató

27 Március 2025
Einhell

Einhell GE-CM 36/36 Li M Útmutató

27 Március 2025
Flymo

Flymo EasiMow 380R Útmutató

16 Március 2025
Gardena

Gardena 380-4023 Útmutató

15 Január 2025
Gardena

Gardena 5038 PowerMax Li-40-37 - 2018 Útmutató

15 Január 2025
RYOBI

RYOBI RLM3715A Útmutató

14 Január 2025
Herkules

Herkules MB 470 EW Útmutató

12 Január 2025
Cocraft

Cocraft PRO Edition V40 Útmutató

12 Január 2025