Használati útmutató Ozito CPM-300C

Ozito Fűnyírógép CPM-300C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito CPM-300C (6 oldal) a Fűnyírógép kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/6
300MM CYLINDER PUSH MOWER
CYLINDER
PUSH MOWER
300MM
INSTRUCTION MANUAL
SPECIFICATIONS
Cutting Width: 300mm
Cutting Height: 16 - 38mm, 4 positions
Spindle: Ø125mm
Grass Catcher: 16 Litres
Weight: 6.35kg
CPM-300C
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: bearings and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
OZITO 25 Fox Drive, Dandenong South, VIC 3175, Australia.
ozito.com.au
Cylinder Mower
Upper Handle
0624
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Handle Uprights x 2
Grass Catcher
Lower Handle, Bolts & Nuts x 6
10mm
Bolt
Bolt
Tools Required
To assemble the mower handles you
will require a 10 mm spanner (not
included).
Fitting the Handle
1. First, select the upper handle and the two handle uprights. Insert the
two handle uprights into the upper handle.
2. Fasten the handle uprights and upper handle together using two
shorter bolts, through the square holes, and nuts as shown.
3. Place the handle uprights onto the lower handle and fasten together
using the four longer bolts, through the square holes, and nuts as
shown.
1. Upper Handle
2. Handle Upright x 2
3. Lower Handle
4. Wheels
5. Height Adjustment Knob x 2
6. Grass Catcher
7. Blade Adjustment x 2
8. Blades
9. Rear Roller
10. Blade Guard
11. Bolts & Nuts Short x 2
12. Bolts & Nuts Long x 4
CYLINDER PUSH MOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5 6
7 8
12
11
9 10
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Grass Catcher
1. Hook the grass catcher in place on the left and right side of the
roller.
2. Fit the strap over the lower handle and clip together, adjust so the
catcher sits flat when mowing.
4. Now the handle is fully assembled and ready to be attached to the
mower body.
To attach the handle to the mower body, locate the two metal lugs
found forward of the cutting bar adjustment lock nuts. Insert one
of the large holes in the
handle over the lug, then
repeat the same process
on the other side. It may
be necessary to squeeze
the two lower handle arms
together to allow room for
locating the second arm
over the remaining metal
lug.

Termékspecifikációk

Márka: Ozito
Kategória: Fűnyírógép
Modell: CPM-300C

Szüksége van segítségre?

Ha segítségre van szüksége Ozito CPM-300C, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűnyírógép Ozito

Ozito

Ozito CPM-300C Útmutató

10 December 2024
Ozito

Ozito PXBMK-4047SP Útmutató

29 Augusztus 2024
Ozito

Ozito ELM-1230 Útmutató

13 Augusztus 2024
Ozito

Ozito ESA-1231U Útmutató

13 Augusztus 2024
Ozito

Ozito PXCLMK-218U Útmutató

11 Augusztus 2024
Ozito

Ozito PXCLMK-1318EU Útmutató

11 Augusztus 2024
Ozito

Ozito PXCSDMK-418U Útmutató

11 Augusztus 2024
Ozito

Ozito PXCLMK-418U Útmutató

10 Augusztus 2024
Ozito

Ozito LMPC-301U Útmutató

10 Augusztus 2024
Ozito

Ozito ELM-1536U Útmutató

7 Augusztus 2024

Útmutatók Fűnyírógép

Legújabb útmutatók Fűnyírógép

Flymo

Flymo 36V EasiStore 340R Kit Útmutató

5 Április 2025
Craftfull

Craftfull CR-139 Útmutató

1 Április 2025
Black Decker

Black Decker CLMA4820L2 Útmutató

31 Március 2025
Makita

Makita PLM4630 Útmutató

29 Március 2025
Einhell

Einhell EM 1650 Útmutató

27 Március 2025
Solo

Solo GT 4235 Útmutató

27 Március 2025
Einhell

Einhell GE-CM 36/36 Li M Útmutató

27 Március 2025
Flymo

Flymo EasiMow 380R Útmutató

16 Március 2025
Gardena

Gardena 380-4023 Útmutató

15 Január 2025
Gardena

Gardena 5038 PowerMax Li-40-37 - 2018 Útmutató

15 Január 2025