Használati útmutató Ozito LMLT-1025

Ozito Fűnyírógép LMLT-1025

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Ozito LMLT-1025 (12 oldal) a Fűnyírógép kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/12

ECOMOW

ELECTRIC MOWER

1000W 305mm

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Motor: 1000W

No Load Speed: 3,400/min

Cutting Width: 305mm

Cutting Heights: 3 levels, 30-70mm

Catcher Capacity: 25 litre

Weight: 7.97kg

ELM-1030

WHAT’S IN THE BOX

Electric Lawn Mower

Handle Fasteners

Grass Catcher

WARRANTY

0717

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from the

original date of purchase and is intended for DIY (Do It Yourself) use

only. If a product is defective it will be replaced in accordance with

the terms of this warranty. Warranty excludes consumable parts, for

example: blade, cord clips, bearings, carbon brushes etc.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that specified on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the instruction

manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofﬁce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benefits provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

KNOW YOUR PRODUCT SETUP & PREPARATION

1. Motor cover

2. Lifting handle

3. Lower handle

4. Safety switch

5. Start/stop lever

6. Handle knobs

7. Grasscatcherap

8. Grass catcher

9. Handle securing set

10. Upper handle

11. Cord retainer

1. ASSEMBLY

ECOMOW ELECTRIC MOWER

9 10 11

2 3 4

67 8

WARNING!: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE ASSEMBLY.

Fitting the Lower Handle to Mower Body

1. Fit the lower handle onto the

threaded ends.

1. Firsttthecordretainer,slide

it over the upper handle end

beforexingtheupperhandle

to the lower handles.

Fitting the Upper Handle to the Lower Handle

2. Fit and secure in place with

the lower handle knobs.

2. Place the upper handle over

the upper ends of the lower

handle. From the handle

securingset,tthebolts

through the inner side of

the lower handle and then

through the holes in the upper

handle. Secure in place by

screwing the handle securing

knobs over the protruding

ends of the bolts.

OPERATION

Toobtainthedesiredcuttingheight,thefrontandrearaxlesare

repositioned on the underside of the mower housing.

1. Secure the power cord from the

switch housing to the mower using

cable ties (supplied).

2. To assemble the grass catcher

align the two halves and push

themtogether,onesideata

time. Ensure the two halves click

together around the entire middle

section.

1. Assemble the grass catcher

handle onto the opening

on the top half of the grass

catcher. The handle will click

into position when aligned

andttedcorrectly.

WARNING!: WHEN ASSEMBLING THE GRASS

CATCHER BACK TO THE MOWER AFTER

EMPTYING, ALWAYS ENSURE THERE IS NO BUILD

UP OF GRASS IN THE GRASS CHUTE. IF NEEDING TO

CLEAR THE GRASS, ALWAYS ENSURE THE MOWER

IS DISCONNECTED FROM THE POWER SUPPLY

PRIOR TO CLEARING. A BUILD UP OF GRASS IN THE

GRASS CHUTE MAY PREVENT GRASS FROM MOVING

INTO THE GRASS CATCHER EFFECTIVELY.

WARNING!: DISCONNECT THE MOWER FROM

THE POWER SUPPLY AND ENSURE THE BLADE

HAS STOPPED COASTING BEFORE ADJUSTING THE

HEIGHT.

Securing the Power Cord to the Handles

Assembling the Grass Catcher

“CLICK”

Fitting and Removing Grass Catcher

2. PREPARATION

Cutting Height Adjustment

3. Toemptythegrasscatcher,lift

thecatcherapwithonehand

then lift the grass catcher with

the other hand up off the two

raised housing clips.

The catcher must be attached to the two raised hooks on the mower.

1. Liftupthecatcherapwithone

hand and guide the catcher over

the two hooks on the mower

housing.

2. Lower the grass catcher in place

andlowerthecatcherap.The

catcherapisheldagainstthe

gass catcher by a spring

1. Place the mower on its side.

2. Pullthewheelaxletowards

the front of the mower.

3. Locatethewheelaxleinto

the desired cutting height

adjustment position.

HOOK

Using the Cord Retainer

1. Makealoopwiththeextension

lead (socket end of lead)

through the loop and secure

over the hook.

2. Oncetted,connectthelawn

mower power plug into the

extensionleadsocket.

Note:Makesurethatfront,back,

left & right wheels are located in

the same cutting height adjustment

position.

Cutting Height Positions

1 - 30mm (lowest).

2 - 50mm.

3 - 70mm (highest).

Thecordretainerpreventstheextensionlead(notincluded)from

beingdisconnectedduringuse.OnlyuseHeavyDutyextensionlead

suitableforoutdoorusewithelectricgardentools,nolongerthan25

meters.

Termékspecifikációk

Márka:	Ozito
Kategória:	Fűnyírógép
Modell:	LMLT-1025

Szüksége van segítségre?

Ha segítségre van szüksége Ozito LMLT-1025, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Fűnyírógép Ozito

Ozito CPM-300C Útmutató

10 December 2024

Ozito PXBMK-4047SP Útmutató

29 Augusztus 2024

Ozito ELM-1230 Útmutató

13 Augusztus 2024

Ozito ESA-1231U Útmutató

13 Augusztus 2024

Ozito PXCLMK-218U Útmutató

11 Augusztus 2024

Ozito PXCLMK-1318EU Útmutató

11 Augusztus 2024

Ozito PXCSDMK-418U Útmutató

11 Augusztus 2024

Ozito PXCLMK-418U Útmutató

10 Augusztus 2024

Ozito LMPC-301U Útmutató

10 Augusztus 2024

Ozito ELM-1536U Útmutató

7 Augusztus 2024

Útmutatók Fűnyírógép

Legújabb útmutatók Fűnyírógép

Craftfull CR-139 Útmutató

1 Április 2025

Black Decker CLMA4820L2 Útmutató

31 Március 2025

Makita PLM4630 Útmutató

29 Március 2025

Einhell EM 1650 Útmutató

27 Március 2025

Solo GT 4235 Útmutató

27 Március 2025

Einhell GE-CM 36/36 Li M Útmutató

27 Március 2025

Flymo EasiMow 380R Útmutató

16 Március 2025

Gardena 380-4023 Útmutató

15 Január 2025

Gardena 5038 PowerMax Li-40-37 - 2018 Útmutató

15 Január 2025

RYOBI RLM3715A Útmutató

14 Január 2025