Használati útmutató Netgear AirBridge WBC502B2

Netgear wifi ismétlő AirBridge WBC502B2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Netgear AirBridge WBC502B2 (2 oldal) a wifi ismétlő kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Power adapter and power cord
(varies by region).
Package contents
Pole mounting strap Wall mount screws
and anchors
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo are trademarks of NETGEAR, Inc. Any
non‑NETGEAR trademarks are used for reference
purposes only.
April 2020
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
Insight Instant
Wireless AirBridge
Model WBC502B2
Installation Guide
Insight Instant Wireless AirBridge
(Model WBC502)
This installation guide describes how to establish a WiFi bridge between two Insight
Instant Wireless AirBridge devices that are precongured for a point-to-point setup.
One AirBridge device is precongured as the master, the other one as the satellite.
You connect the AirBridge master to your wired network at the main site to provide
WiFi connectivity to the AirBridge satellite that you install at the detached site.
This point‑to‑point setup requires a line of sight between the AirBridge master at the
main site and the AirBridge satellite at the detached site.
AirBridge overview
1Power LED
2LAN1 LED: Power and network
3LAN2 LED: Ethernet device
4WLAN LED: WiFi connectivity
5Signal strength indicator LEDs
1. Prepare for installation
1
23
4
5
1Latch for bottom panel
1
Front view
Back view
1Reset button
2LAN1: PoE and network connectivity
3LAN2: Optional device for satellite only
Bottom view
12
3
1. Pull down on the latch on the front of the
device and remove the bottom panel of
the AirBridge to expose the ports.
2. Power on the AirBridge master
WARNING: Power on the AirBridge only with an Ethernet cable connected to the
provided power adapter, which must be placed indoors. Do not use any other
power source. The PoE port is not a standard PoE port. Using any other power
source can damage the device.
2. With the back of the AirBridge facing
you, connect an RJ‑45 Ethernet cable (not
provided) to the AirBridge 24V PoE port on
the right side of the device. Connect the
other end of the cable to the PoE port on
the power adapter.
3. Insert the plug into a power source.
All the LEDs light and then go off. The power LED stays lit.
Other AirBridge (WBC502) features:
• 2.4 GHz management SSID
• 5 GHz SSID extends your network
• Range of 1.8 miles (3 km) or more
This device must be professionally installed. It is
the installer’s responsibility to follow local country
regulations including operations within legal frequency
channels, output power and DFS requirements. Vendor
or Reseller or Distributor is not responsible for illegal
wireless operations. Please see Device’s Terms and
Conditions for more details.
Terms of Use
12
1PoE port: Connect to AirBridge LAN1
2LAN port: Connect to the network
Installation guide
Screw placement guide
Model WBC502B2 is a bundle with one
precongured AirBridge master and
one precongured AirBridge satellite.
A label on the front of the AirBridge
shows whether the AirBridge is
precongured as a master or a satellite.
3. Connect the AirBridge master to the network
We recommend that you connect the AirBridge master to a network with Internet
access during setup. If the network includes a DHCP server, such as a router, the master
is automatically assigned a new IP address. (The default IP address is 192.168.0.100.)
1. Connect the LAN port on the power adapter to a LAN port on a switch or router
on your network. (Do connect the LAN2 port on the master directly to your not
network.)
2. Slide the bottom port cover onto the master until it latches.
3. Install the master to allow for a direct line of site to the detached location, facing
the location where you want to install the AirBridge satellite.
Master
Router Network
Power
adapter
Note: The power adapter and power
cord are not IP55 rated and must be
placed indoors. Because an Ethernet cable
supports a maximum length of 328 feet
(100 meters), you can place the AirBridge
outdoors but keep the power adapter and
power cord indoors.
5. Optional: Log in to the master and satellite
1. Install the AirBridge satellite at the detached location in such a way that the
satellite is in a direct line of sight to the master at the main site, and is facing the
master.
You can place the satellite at a distance of 1.8 miles (3 km) or more from the master.
2. Connect power to the satellite the same way you did for the master (see 2. Power
on the AirBridge master.
After the satellite establishes a WiFi connection with the master, the signal
strength indicator (SSI) LEDs light to indicate the strength of the signal for the WiFi
connection.
3. Use the SSI LEDs to adjust the position of the satellite for an optimal WiFi signal.
If the signal strength is weak or moderately good, make sure that you place the
satellite according to the following guidelines:
• Place the satellite at a higher location.
• Make sure that the satellite is in a direct, or near line of sight to the master at
the main site.
• Make sure that the front panel of the satellite is facing the front panel of the
master at the main site.
Note: You can use the NETGEAR Insight app to align the satellite. For more
information, see https://kb.netgear.com/000061678.
4. Install the AirBridge satellite
Support and Community
Visit netgear.com/support to get your
questions answered and access the
latest downloads.
You can also check out our NETGEAR
Community for helpful advice at
community.netgear.com.
For more information about Insight
Instant Mesh‑capable products, visit
netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada,
vous pouvez accéder à ce document
en français canadien à https://www.
netgear.com/support/download/.
(If this product is sold in Canada, you
can access this document in Canadian
French at https://www.netgear.com/
support/download/.)
For regulatory compliance information
including the EU Declaration of
Conformity, visit https://www.netgear.
com/about/regulatory/.
See the regulatory compliance
document before connecting the
power supply.
For NETGEAR’s Privacy Policy, visit
https://www.netgear.com/about/
privacy-policy.
By using this device, you are agreeing
to NETGEAR’s Terms and Conditions
at https://www.netgear.com/about/
terms-and-conditions. If you do not
agree, return the device to your place
of purchase within your return period.
Other supported modes
Other supported operation modes
for the AirBridge include point‑to‑
multipoint master‑to satellite, access
point, and client bridge. For more
information, see the user manual at
netgear.com/support/product/WBC502.
Insight Premium and Insight Pro
subscribers can use the Insight Cloud
portal to change or manage the point‑
to‑point master‑to‑satellite setup. For
more information, see the NETGEAR
Knowledge Base.
Green LED Right SSI LED solid green. The signal for the WiFi connection is
strong. The left and middle SSI LEDs are off.
Amber LED Middle SSI LED solid amber. The signal for the WiFi connection
is moderately good. The left and right SSI LEDs are off.
Red LED Left SSI LED solid red. The signal for the WiFi connection is
weak. The middle and right SSI LEDs are off.
SSI LEDs off All SSI LEDs off. No WiFi connection is established or the signal
strength cannot be determined.
Note: By default, the management mode of the precongured AirBridges is local
browser UI. You can change the management mode so that you can use NETGEAR
Insight to manage the conguration for a point-to-point setup between a master and a
satellite. For more information, visit https://www.netgear.com/support/product/insight.aspx.
We recommend that you log in to the local browser UI of the master rst.
1. Connect your mobile device or computer to the same network where you
connected the AirBridge master or satellite.
2. Enter the IP address of the AirBridge.
If you don’t know the IP address of the AirBridge, use the NETGEAR Insight app or
another discovery method.
Your browser might display a security message. Ignore it or add an exception.
The page adjusts to show the Day Zero Easy Setup settings.
3. In the AP Login New Password eld, specify a new local device password for the
AirBridge, and conrm the password.
4. In the Management WPA2 Passphrase eld, specify a new passphrase for WiFi
management access only.
5. Click the button.Apply
Your settings are saved and the WiFi link might need to be reestablished.
6. Log in with the user name admin and the new local device password that you just
specied, and agree to the Terms of Use.
You can now change or manage the AirBridge settings using the local browser UI.
Line of sight
Single device or
extended network
Master Satellite
Network
4. Test the network connectivity by doing one of the following:
• Connect a computer to the LAN2 port on the satellite.
• Connect a WiFi access point to the LAN port on the satellite’s power adapter
and then connect a WiFi client to the access point.
At the detached site, if you can access the network at the main site and the
Internet, the WiFi connection functions.
6. Register your devices in NETGEAR Insight
1. On your mobile device, visit the Apple App Store or Google Play Store, search for
NETGEAR Insight, and download the latest version of the app.
2. Open the NETGEAR Insight app on your mobile device.
3. If you do not own a NETGEAR account, tap Create NETGEAR Account and follow
the onscreen instructions.
4. Enter the email address and password for your account and tap .LOG IN
5. Tap in the upper right corner.+
6. Either use the camera on your phone to scan the bar code, or type in the serial
number.
7. Follow the instructions on screen to register the device.

Termékspecifikációk

Márka: Netgear
Kategória: wifi ismétlő
Modell: AirBridge WBC502B2

Szüksége van segítségre?

Ha segítségre van szüksége Netgear AirBridge WBC502B2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók wifi ismétlő Netgear

Netgear

Netgear A7000 Útmutató

3 Október 2024
Netgear

Netgear EX6170 Útmutató

3 Szeptember 2024
Netgear

Netgear AirBridge WBC502B2 Útmutató

26 Július 2024
Netgear

Netgear EX6420 Útmutató

22 Július 2024
Netgear

Netgear EX3800 Útmutató

20 Július 2024
Netgear

Netgear EX3700 Útmutató

14 Július 2024
Netgear

Netgear EX6100 Útmutató

9 Június 2024
Netgear

Netgear WN2500RP Útmutató

9 Június 2024
Netgear

Netgear EX2700 Útmutató

8 Június 2024

Útmutatók wifi ismétlő

Legújabb útmutatók wifi ismétlő

Hawking Technologies

Hawking Technologies HOW2R1 Útmutató

15 Október 2024
Planet

Planet WNAP-1110 Útmutató

10 Október 2024
Ubiquiti Networks

Ubiquiti Networks MIMO Multiplexer Útmutató

3 Október 2024
Planet

Planet LRP-104CET Útmutató

30 Szeptember 2024
Totolink

Totolink EX200U Útmutató

29 Szeptember 2024
SilverCrest

SilverCrest SWV 300 B2 Útmutató

29 Szeptember 2024
Xiaomi

Xiaomi RA75 Útmutató

28 Szeptember 2024
Totolink

Totolink EX300 Útmutató

28 Szeptember 2024
Sitecom

Sitecom WLX-2001 Útmutató

23 Szeptember 2024
Planet

Planet POE-E201 Útmutató

22 Szeptember 2024