Használati útmutató Morel Soundsub PSW8e-w

Morel hi-fi rendszer Soundsub PSW8e-w

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Morel Soundsub PSW8e-w (4 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
www.morelhifi.com
SUBWOOFER POSITIONING
Fig. 1 Fig. 3Fig. 2
Full 5.1 surround
Stereo only
To avoid personal injury, install the subwoofer in a location where any rear amplifier parts such as
panels and/or heatsinks, etc. cannot be accidentally touched.
For home theatre application with receivers that
include a “Sub Out” feature (the most common
connection method of surround receivers) Connect
all speakers directly to the receiver. Adjust your
receiver’s speaker configurations as follows: Set
Front, Center and Surround speakers to “small” or
“large” according to speaker size and bandwidth.
Receiver Settings:
Front, Center and Surrounds= “small/large”
Subwoofer=”ON”, or “YES”, or “PRESENT”
Set the crossover frequency on the receiver to
60-150Hz depending on speaker bandwidth.
Consult your receiver’s owner manual for speaker
configuration. Usually, a satellite speaker would be
set to “small” and “big”/ floor standing speaker,
would be set to “large”.
SUBWOOFER CONNECTION
Bass notes are Omni-directional and therefore become less directional as they go down in frequency. For
best sonic Integration with your speakers, positioning your subwoofer in-front of the listening area will usually
provide the best bass performance (Fig 1).
If such position is not possible your subwoofer may be placed anywhere in the room, this will slightly affect
the stereo image of your front speakers or the soundstage of your multichannel speaker system.
PLEASE NOTE:
- Corner placement provides the most bass, but sometimes at the expense of accuracy.
- Usually a subwoofer placed near a wall will provide a good balance of power and accuracy.
- Controls are provided to align your subwoofer’s output with that of the other speakers in your system.
Product Disposal—
Certain international, nationa l
and/or local laws and/or reg-
ulations may apply regarding th e
disposal of this product. For furthe r
detailed information, pleas e
contact the retailer where you
purchased this product or the Morel
Distributor in you r
Morel’s distributors can be found
at the website:
country.
morelhi.com
IMPORTANT SAFETY INSTRUCTION S
READ BEFORE OPER TING EQUIPMEN A T
1. .Read these instructions
2. .Keep these instructions
3. .Read all warnings
4. .Follow all instructions
5. Do not use the subwoofer near water.
6. Clean only with dry cloth .
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s .instructions
8. Do not install near any heat sources such as radiators, heat registers, stoves ,
or other apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the othe r. A grounding type plug has two blades and third a
grounding prong. The wide blade or the third prong are provided for your safet y. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10 Protect the power cord. from being walked on or pinched particularly at plugs ,
convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specied. by the manufacture r.
12 Use only with the. cart, stand, tripod, bracket, or table specied by th e
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-ove r.
13 Unplug this apparatus during. lightning storms or when unused for long periods
of time.
14 Refer all servicing to. qualied service personnel. Servicing is required when the apparatus
has been damaged in any wa y, such as powe r-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
15. WARNING: To reduce the risk of re or electric shock, this apparatus should not be exposed to
rain, moisture and objects lled with liquids. should not be placed on this apparatus.
16. To completely disconnect this equipment from the mains, disconnect the power supply cord
plug from the receptacle.
17 The main plug of. the power supply cord shall remain readily operable.
SUB WOOFER USER MANUAL
TM
SPECIFICATIONS SOUNDSUB
Morel operates a product design improvement policy consequently specifications are subject to alterations without prior notice
When connectiong to a stereo amp:
Center and rear speakers are not in use
10
LIN E IN LEV EL
0
WIR EL ESS IN
z LFE
FRE QU EN CY
200
Hz
PHA SE
0
180
120-240V~ 50/60Hz 1.6A
POW ER
L IN E I NR EL E S S I N P HA S
0
180
PSW8e-w SOUNDSUBTM
Dear Customer,
Thank you for choosing Morel’s SoundSub
Subwoofer. The information in this manual will help
you get the best possible performance out of your
subwoofer. If you have any questions, please
contact your Morel dealer, or Morel support at
w w w . m o r e l h i f i . c o m
Morel wishes you years of musical enjoyment.
Safety Instructions
The new SoundSub™ is a shallow
compact, reflex-loaded subwoofer,
designed to deliver a full bass
impact along with the dynamics of
a rich home theatre experience. It
is a powered active subwoofer with
a slim round design and low
energy consumption when in
stand-by mode (less than 0.5W
when there is no musical note).
This subwoofer is suitable for any
home theatre system; with an
emphasis on ideal acoustic
series. The Subwoofer is driven by
a high quality BASH™ amplifier
(150w).
The amplifier offers all desirable
features in a home theatre system,
including auto power volume
control and, phase control for
seamless system integration.
integration with Morels SoundSpot
Read The instructions
Please read all safety and operating instructions carefully
before using or connecting your SoundSub subwoofer.
Output Level
Before operating, set the Subwoofer output level knob to
minimum.
Auto Power And Stand By
PSW8e-w is fitted with an automatic audio signal
detection system.
If the PSW8e-w/10e-w is plugged in, the unit powers up
the moment it detects an audio signal.
When, on the other hand, the unit goes without detecting
an audio signal, it automatically goes into standby.
Water and Moisture
To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture
Service
Please do not attempt to service the appliance beyond
the steps described within the operating instruction.
All other servicing should be referred to a qualified
service technician.
SOUNDSUBTM PSW8e-w Amplifier Controls
6. LEVEL CONTROL
The level control adjusts the bass level (volume) of your subwoofer.
Adjust your required level of bass relative to the sound reproduced by the other speakers in the system. The bass level
reproduced by the subwoofer will change as you modify the volume control setting on your amplifier/receiver, maintaining
the relative level set by this control.
5. FREQUNECY CONTROL
The crossover control determines the range of frequencies your subwoofer will reproduce. When turned to 50Hz, the
subwoofer will only issue the lowest bass frequencies. As you turn the knob towards 200Hz, the subwoofer will reproduce
more high frequency notes (higher range). When the crossover control is adjusted correctly, the subwoofer, together with
the other speakers in your system, reproduces the entire range of frequency.
4. PHASE CONTROL
The phase control allows phase adjusting of the subwoofer to match that of the other speakers in your home theater
system. With the system turned on, turn the phase control first to 0° then to 180°, and leave it in the position at which the
bass level in your room sounds strongest and deepest.
3. RCA INPUT JACKS
The RCA input terminal of the subwoofer amplifier (line in) connects via RCA cable the unit to your amplifier/receiver
subwoofer out.
2. WIRELESS INPUT
For connecting the subwoofer in wireless input, please see Morel's Sub Wireless receiver manual (purchased separately).
1. AUTO POWER
PSW8e-w/10e-w is fitted with an automatic audio signal detection system. If the PSW8e-w/10e-w is plugged in, the unit
powers up the moment it detects an audio signal. When the unit does not detect an audio signal, it automatically goes into
standby.
1
105 0
L IN E IN L EV EL
0
W IR EL ES S IN
H z L FE
F RE QU EN CY
20 0
H z
P HA SE
0
180
120-240V~ 50/60Hz 1.6A
P OW ER
8e-w
CONNECTION GUIDELINES
Before making connections it is advisable to ensure that all AC power cords of the components you
are interconnecting are unplugged from the wall outlets during the connection process.
AUTO VOLTAGE SELECTOR
As operating, the auto voltage selector will automatically adjust the PSW8e-w/10e-w subwoofer to
115V or 230V, according to the power supply in your country.
TM

Termékspecifikációk

Márka: Morel
Kategória: hi-fi rendszer
Modell: Soundsub PSW8e-w

Szüksége van segítségre?

Ha segítségre van szüksége Morel Soundsub PSW8e-w, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hi-fi rendszer Morel

Morel

Morel SUB-10X Útmutató

1 Október 2024
Morel

Morel USUB 803 Útmutató

1 Október 2024
Morel

Morel Sopran 934 Útmutató

1 Október 2024
Morel

Morel MXT-380 Útmutató

9 Augusztus 2024
Morel

Morel MXR240.4 Útmutató

9 Augusztus 2024
Morel

Morel MXR300.4 Útmutató

4 Augusztus 2024
Morel

Morel MXT380C Útmutató

4 Augusztus 2024

Útmutatók hi-fi rendszer

Legújabb útmutatók hi-fi rendszer