Használati útmutató Klipsch ProMedia Ultra 2.0

Klipsch hi-fi rendszer ProMedia Ultra 2.0

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Klipsch ProMedia Ultra 2.0 (4 oldal) a hi-fi rendszer kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/4

ProMedia Ultra 2.0

Personal Audio System

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories speciﬁed by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to

avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. REFER all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

This symbol indicates that dangerous voltage constituting a risk of electric shock is present

within this unit.

The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product enclosure

that may be of sufficient magnitude to constitute a risk of shock to persons.

WARNING: To reduce the risk of ﬁre or electrical shock, do not expose this apparatus

to rain or moisture. The product must not be exposed to dripping and splashing and no object filled with

liquids – such as a vase of ﬂowers – should be placed on the product.

WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all

servicing to qualified service personnel.

CAUTION: Changes or modiﬁcations not expressly approved by the manufacturer could void the users

authority to operate this device.

No naked ﬂame sources – such as candles – should be placed on the product.

The ventilation should not be impeded by covering the ventilation openings with items, such as

newspapers, table-cloths, curtains, etc.

SERVICE: Equipment for servicing should be returned to the supplying dealer, or to the appointed service

agents in your area. For service within the United States:

Klipsch Customer Service:1-888-554-5665

If purchased outside the U.S., please contact your local dealer.

PACKING LIST

1 control satellite and 1 passive satellite

1 Owner's manual

1 Stereo mini-plug cable

1 22 gauge speaker wire/ RCA terminations

1 Power supply with AC cord and power cable attached

SPEAKER PLACEMENT

1. The two speakers should be positioned on each side of your computer monitor, with the control

satellite on the right.

2. Do not cover up the ventilation slots or rear acoustic port of the enclosure and be sure to

provide enough ventilation. It is normal for the area around the ventilation slots to be warm

to the touch.

3. Avoid running speaker or power cables across an area of foot traffic.

SPEAKER CONNECTION DIAGRAM

1. Do not plug in AC power until system setup is complete.

2. Connect mini plug cable from the control speaker to the primary audio source (computer,

iPod®, etc.).

3. Connect RCA speaker cable from control (active) speaker to the passive speaker.

Note: The active speaker plays right channel, and the passive speaker plays the left channel.

4. Connect DC power supply cable to the DC IN of the control speaker.

5. Plug headphone mini stereo plug into headphone jack, if desired.

Note: The speakers will not play while headphones are connected.

6. Plug stereo mini plug into MP3/Aux jack. Plug stereo mini plug into MP3 player (for example).

SOFTWARE AND HARDWARE GAIN CONTROLS

Software Volume Controls in Microsoft Windows

1. Click the Start button on your taskbar

2. Choose Accessories

3. Windows 95: Choose Multimedia

Windows 98/2000: Choose Entertainment

Windows XP: Choose Entertainment

4. Click on the Volume Control

5. Adjust the Wave Volume Elevator Button to halfway

Volume Control Programs

Some soundcard and/or PC manufacturers may have software that must be adjusted separately

from the Windows volume control. Consult applicable manual for speciﬁc hardware documentation.

CONTROL FEATURES

Headphones: The 1/8" stereo headphone output jack, located on the front of the master

speaker, turns off the two speakers. The main volume control will adjust the headphone output.

The bass control knob does not function in this mode.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Desktop PC

Power Supply

PMU 2.0

iPod®/MP3

CD/DVD

Laptop

MP3/Aux: The MP3/Auxiliary input jack is used with portable audio players. This signal will be

mixed with the main source. To obtain the proper balance with the main signal, the level adjust-

ments in the computer software and in the portable player will need to be adjusted. An example

would be listening to an MP3 player while surﬁng the net and hearing associated sounds from

various websites. The mixed sound may not be desirable, and you will ultimately determine how

you use this feature.

NOTE: During playback of MP3 ﬁles, overall sound quality may be perceptibly degraded compared

to other audio sources such as CD. This is caused by the encoding method and quality of the MP3

file. It is recommended that MP3 files be encoded at a minimum 128 bit rate.

SPECIFICATIONS (Visit www.klipsch.com for more details)

Speaker Impedance: 3 ohms nominal

Master Speaker Features: Bass and Main volume level controls

LED power indicator

MP3/Aux player line input with soundcard mixing function

Headphone jack

Direct path interface

Slave speaker output RCA jack

Enclosure & Drivers: Ported elliptical two-way enclosure with 25mm metalized

polymer dome tweeter mated to MicroTractrix®Horn and

dual 2.5" long-throw mid-bass drivers

Ampliﬁer: High-eﬃciency Class D power section and audio quality

transformer designed for uncompressed full

power sound

TROUBLESHOOTING

If no sound, ensure that:

- Power, input, speaker cables and connectors are securely attached

- Software is properly installed and functioning

- Computer sound (control panel) volume is turned up and not muted

- Rotate volume knob clockwise to turn on, LED glowing

If one or more speakers have little or no sound, ensure that:

- All cables are connected properly

- Connectors are fully "seated" in soundcard and speakers

- Volume level controls are properly adjusted

- Computer software audio settings are adjusted for proper use

- Computer system's sound (control panel) volume is turned up

If the speakers exhibit distortion or buzzing:

- Turn down computer's overall volume (via control panel) and reduce speaker volume

- Turn down bass volume, as program signal may be too strong

- Plug the power cord into a surge protector

If there is noise or hissing and the volume is low even with main volume turned up:

- Turn up computer's sound volume (via control panel)

- Turn down main volume on control pod to compensate

- Ensure that software/hardware is properly installed and operating

If there is computer monitor interference:

- Increase the distance between the speakers and the computer monitor.

For more detailed information and FAQs, please visit www.klipsch.com.

DC Power Adapter

The Ultra 2.0 is designed to be used only with the supplied DC power adapter.

FCC and Canada EMC Statements

Approved under the veriﬁcation provision of FCC Part 15 as a Class B Digital Device.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio freuency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turninng the

equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit diﬀerent from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Certifications Statement:

ProMedia Ultra 2.0: Conforms to European Union Directives, Eligible to bear CE marking, Meets

European Union Low Voltage Requirements: Safety per EN60065 Sixth Edition and IEC60065 Sixth

Edition (CB Scheme); Meets European Union EMC Requirements: Emissions per EN55013:2001,

EN61000-3-2:2000, and EN61000-3-3:1995; Immunity per EN55020:2002.

Note: EMC conformance testing is based on the use of supplied and recommended cable types

and power supply. The use of other cable types may degrade EMC performances.

WARRANTY—U.S. AND CANADA ONLY

KLIPSCH, LLC ("KLIPSCH") warrants this product to be free from defects in materials and

workmanship (subject to the terms set forth below) for a period of one (1) year from the date of

purchase. During the warranty period, KLIPSCH will repair or replace (at KLIPSCH's option) this

product or any defective parts. Proof of purchase in the form of a bill of sale or receipted invoice

from an authorized Klipsch dealer, which is evidence that this product is within the warranty

period, must be presented or included to obtain warranty service. This warranty does not cover

damage due to misuse, abuse, negligence, acts of God, accident, commercial use or modiﬁcation

of, or to any part of this product. This warranty does not cover damage due to improper operation,

maintenance or installation, or attempted repair by anyone other than KLIPSCH or someone

authorized by KLIPSCH to do warranty work. Any unauthorized repairs will void this warranty. This

warranty does not cover product sold AS IS or WITH ALL FAULTS. This warranty is invalid if the

factory applied serial number or date stamp has been altered or removed from this product.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE

REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS

PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN

LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT

LIMITED TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or

implied warranties so the above exclusions may not apply to every customer. This warranty gives

you specific legal rights, and you may have other rights which vary from State to State.

To obtain warranty service, please follow these directions:

1. If you purchased this product from a retail store, please return this product to such store in its

original packaging along with proof of purchase.

2. If you purchased this product from a computer manufacturer, please contact that

manufacturer.

3. For purchases made through www.klipsch.com, please call KLIPSCH Customer Service at

1-888-554-5665. Product may only be returned to KLIPSCH after a Return Authorization

number has been obtained from KLIPSCH.

Returned product must be shipped, freight prepaid to KLIPSCH in either its original packaging or

packaging affording an equal degree of protection along with proof of purchase.

WARRANTY—OUTSIDE THE U.S. AND CANADA

The warranty on this product if it is sold to a consumer outside of the United States or Canada

shall comply with applicable law and shall be the sole responsibility of the distributor that

supplied this product. To obtain any applicable warranty service, please contact the dealer from

which you purchased this product, or the distributor that supplied this product.

Termékspecifikációk

Márka:	Klipsch
Kategória:	hi-fi rendszer
Modell:	ProMedia Ultra 2.0

Szüksége van segítségre?

Ha segítségre van szüksége Klipsch ProMedia Ultra 2.0, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók hi-fi rendszer Klipsch

Klipsch ProMedia Ultra 2.0 Útmutató

6 Április 2025

Klipsch HD Theater 500 Útmutató

15 Január 2025

Klipsch HD Theater SB 3 Útmutató

14 Augusztus 2024

Klipsch SB 120 Útmutató

25 Július 2024

Klipsch Quintet II Útmutató

19 Július 2024

Klipsch Stadium Útmutató

14 Július 2024

Klipsch ProMedia Ultra 5.1 Útmutató

7 Július 2024

Útmutatók hi-fi rendszer

Legújabb útmutatók hi-fi rendszer

NEC NP01SW1 Útmutató

9 Április 2025

Vaxis Atom 500 Útmutató

2 Április 2025

INKEE Benbox Útmutató

1 Április 2025

JL Audio SlamPak SLPK-CAN-SPYDER1 Útmutató

31 Március 2025

Teradek Bolt 10K Útmutató

29 Március 2025

Teradek Bolt 500 Útmutató

29 Március 2025

Teradek Cubelet 655 Útmutató

29 Március 2025

Teradek Cube Series Útmutató

29 Március 2025

Teradek Cube 725 Útmutató

29 Március 2025

Teradek Slice 676 Útmutató

29 Március 2025