Használati útmutató Monitor Audio CW10

Monitor Audio mélynyomó CW10

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Monitor Audio CW10 (19 oldal) a mélynyomó kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/19

O w n e r s M a n u a l

Contents

Introduction 1

Unpacking 1

SubConnect 1

AmpPanel 2

Positioning/InitialSetUp 4

SetUp 4

RS232 5

RS232WiringConguration 5

RS232CommunicationSet-UpParameters 5

CommandProtocol 5

CommandList 5

EQProles 6

InfraRedRemoteCodes 6

UpdateFirmwareonSub 6

BootloaderMode 6

AutomaticUpdate. 7

ManualUpdate 7

FactoryReset 8

Guarantee 8

Specications 9

TroubleShooting 10

OwnerInformation 10

ENGLISH

Introduction

Thank you for your purchase of the CW8 or CW10, which have been designed and constructed using quality systems and materials

to provide years of enjoyment, reliability and pride of ownership.

The subwoofers both use our own, proprietary in-house developed DSP and EQ proles to provide you with the all encompassing

Monitor Audio experience. With technology used in the agship range, the Platinum II Series, these subwoofers will ll the room

with ground shaking bass.

Please read through this manual to familiarise yourself with any safety advice and how to set up your subwoofer to achieve the

very best listening experience.

Please retain this manual for future reference.

Unpacking

Care must be taken at all times when handling the subwoofer due to the weight and the construction of the

product. We recommend a two-person lift wherever appropriate.

The mains power cord(s) and 12 volt trigger cable are contained separately in the packaging and should be removed prior to

unpacking the product.

To remove the subwoofer from its carton place some protective material on the oor and having removed any loose items (mains

lead(s) and 12 volt trigger lead) from the top of the packaging, carefully invert the carton. Also refer to the icons printed on the

carton. Gradually pull the carton upwards to expose the subwoofer, which will be presented with its base uppermost. Remove

xing tape from bag and expose the base/cabinet.

SubConnect

The Monitor Audio SubConnect application is a Windows only application that enables the end user to fully customise and control the

advanced features of the subwoofer. The application is downloadable from the Monitor Audio website (www.monitoraudio.co.uk). Here

you will nd full instructions on how to install and use it.

The application will be required should a rmware update be needed for the CW8 or CW10.

monitoraudio.com 1

CUSTOM SUBWOOFER2

40HzMIN MAX 120Hz

Intertek

3100294

121314

1. Volume Control

This controls the master volume of the subwoofer. Further ne trimming can be achieved via the SubConnect application.

2. 12v Trigger - Centre Pin = +12v

For external power control from AV amplier/ receiver to the subwoofer (cable supplied), and to toggle between dierent presets

depending on how it is set up in the SubConnect application. The default setting is to control the power.

This 12 volt signal comes from the source amplier and supplies the subwoofer with a signal to perform a predetermined action.

This is either to turn it on or to switch presets. When used to turn the subwoofer on and o, it is a very energy ecient method

of power control. The auto o timer and signal sense features will not operate when the 12v trigger is connected.

3. RS232 Control

For use with home automation systems and uses a conventional RJ45 connector, refer to page 5 for the wiring conguration

and set up protocol.

4. USB-B Socket

This is provided to update the rmware and settings of the subwoofer in conjunction with the SubConnect application. The

application must be downloaded from the Monitor Audio website. A USB cable is not included, please use the appropriate

USB A - USB B cable.

AmpPanel

Termékspecifikációk

Márka:	Monitor Audio
Kategória:	mélynyomó
Modell:	CW10

Szüksége van segítségre?

Ha segítségre van szüksége Monitor Audio CW10, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók mélynyomó Monitor Audio

Monitor Audio CLG-W12 Útmutató

27 December 2024

Monitor Audio Anthra W15 Útmutató

31 Augusztus 2024

Monitor Audio Radius 390 Útmutató

25 Augusztus 2024

Monitor Audio Mass W200 Útmutató

25 Augusztus 2024

Monitor Audio Silver W-12 Útmutató

25 Augusztus 2024

Monitor Audio Apex AW-12 Útmutató

25 Augusztus 2024

Monitor Audio CW8 Útmutató

25 Augusztus 2024

Monitor Audio CW10 Útmutató

25 Augusztus 2024

Monitor Audio R370HD Útmutató

25 Augusztus 2024

Monitor Audio Radius 380 Útmutató

25 Augusztus 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology IW200-II Útmutató

4 Április 2025

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025

SoundTube CM1001D Útmutató

2 Április 2025

JL Audio FS108-W5 Útmutató

31 Március 2025

Phase Technology PL-12p Útmutató

30 Március 2025

ETON Graphit 8-2 Útmutató

19 Március 2025

ETON Graphit 8-4 Útmutató

19 Március 2025

ETON Graphit 10-4 Útmutató

19 Március 2025

ETON MW 10 FLAT Útmutató

19 Március 2025

ETON PW 8 Útmutató

19 Március 2025