Használati útmutató ETON Graphit 8-2

ETON mélynyomó Graphit 8-2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót ETON Graphit 8-2 (7 oldal) a mélynyomó kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/7
INSTRUCTION MANUAL
EINBAU-ANLEITUNG
8"/10" HIGH-END
2x2 Ω / 2x4 Ω SUBWOOFER
200 MM / 250 MM HIGH-END
2x2 Ω / 2x4 Ω SUBWOOFER
GRAPHIT 8-2
GRAPHIT 8-4
GRAPHIT 10-2
GRAPHIT 10-4
GRAPHIT 8-2
GRAPHIT 8-4
GRAPHIT 10-2
GRAPHIT 10-4
932 0246 00
GRAPHIT Subwoofer (8" oder 10") mit
2 x 2 Ohm oder 2 x 4 Ohm Doppelschwings-
pule
GRAPHIT Subwoofer (8" or 10") with
dual 2 x 2 ohms or 2 x 4 ohms voice coil
1
ETON bedankt sich ausdrücklich für den Kauf
dieses Subwoofers und beglückwünscht Sie
zu der Wahl dieses ausgezeichneten Produk-
tes.
Der ETON Subwoofer garantiert hervorragen-
de Leistungen. Die elektrischen, mechani-
schen und klanglichen Eigenschaften bleiben
über die gesamte Lebensdauer des Produk-
tes erhalten. Wir wünschen Ihnen viel Freude
beim Hören.
Bedienungsanleitung
Die vorliegende Bedienungsanleitung wurde
so konzipiert, dass Sie Ihnen eine korrekte
Installation ermöglicht. Sie enthält Informatio-
nen und grundsätzliche Vorgehensweisen für
die korrekte Funktionsweise des Produktes
und deren daran angeschlossenen externen
Geräte. Bitte lesen Sie die Bedienungsanlei-
tung sorgfältig, bevor Sie mit der Installation
oder dem Anschluss des Subwoofers mit inte-
griertem Verstärkermodul beginnen.
ETON expressly thanks you for deciding to
purchase this subwoofer and congratulates
you on the selection of this excellent product.
The ETON subwoofer is a guarantee for out-
standing performance. The electrical, mechani-
cal and tonal characteristics will be maintained
at the original high standard throughout the en-
tire operational life of this product. We wish you
many pleasant listening hours.
Operating Instructions
The current operational instructions are de-
signed to ensure correct installation of the
amplier. They contain information and es-
sential procedures for the correct operation of
the product and its attached external devices.
Please carefully study the operating instruc-
tions before beginning with the installation or
the connection of the subwoofer with the acti-
ve amplier module.
Einführung
Inhalt
Introduction
Contents
3
Verpackung und Inhalt
Werkzeuge Tools
Die GRAPHIT-Subwooferserie ist in einem da-
für konstruierten schützenden Karton verpackt.
Beschädigen Sie die Verpackung nicht und be-
wahren Sie diese r die spätere Verwendung im
Schadensfalle auf. Kontrollieren Sie bei Erhalt
des Subwoofers, dass: Die Verpackung intakt
ist, der Inhalt den Spezikationen entspricht und
das Produkt keine Beschädigung aufweist. Bei
Fehlen oder Beschädigung von Teilen setzen
Sie sich bitte sofort mit Ihrem Händler in Ver-
bindung. Geben Sie hierbei sowohl das Modell
als auch die Seriennummer des Subwoofers an.
The GRAPHIT-subwoofer series is packed
into an especially constructed protecting car-
ton. Do not damage the packing and store it
for future use in the case of possible dama-
ge. Upon receipt of the ampler module verify
that: The packing is not damaged, the cont-
ents are according to specications, the pro-
duct shows no obvious damage.In the case
of missing or damaged parts please contact
immediately your dealer providing the model
name as well as the serial number of the sub-
woofer.
Die nachfolgenden Werkzeuge werden für
den Einbau benötigt:
Geeignete Schrauben
Dichtmaterial
HINWEIS: Wir empfehlen den Subwoofer
mittels Einschraubmuffen / Einschlagmuttern
o.ä. fest zu verschrauben. Eine Abdichtung
kann mittels EPDM Dichtband / Quellband
erfolgen. In jedemfalle ist auf eine feste und
luftdichte Montage zu achten.
We recommend to place the following
tools ready for installation:
Suitable screws
Sealing material
NOTE: We recommend screwing the sub-
woofer tightly by means of threaded sockets
or similar. The subwoofer can be sealed with
EPDM sealing tape / swelling tape. In any
case, a rm and airtight installation must be
ensured.
Table of contents

Termékspecifikációk

Márka: ETON
Kategória: mélynyomó
Modell: Graphit 8-2

Szüksége van segítségre?

Ha segítségre van szüksége ETON Graphit 8-2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mélynyomó ETON

ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025
ETON

ETON USB 6 AR Útmutató

19 Március 2025

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó