Használati útmutató Mixars LTA

Mixars lemezjátszó LTA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mixars LTA (22 oldal) a lemezjátszó kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/22
Safety Instructions
1. Read these Instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all Instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one
winder than the other. The wide blade is provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or WARNING:
moisture.
16. Since the appliance coupler is used as the disconnection device, the disconnect device shall remain
readily operable.
17. The ventilation should not be impeded by covering the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc.
18. No naked flame sources, such as lighted candles, should be placed on the apparatus.
19. The apparatus should be used in moderate climate.
20. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
EN 1
The exclamation point within the equilateral triangle is intended to alert the user to the
presence of important operation and maintenance (servicing) instructions in the literature
accompanying this appliance.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert
the use to the presence of un-insulated “dangerous voltage” within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock.
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The
apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
CAUTION
To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to prevent blade exposure.
CAUTION
To reduce the risk of electric shock, do not remove
any cover. No user-serviceable parts inside.
Refer servicing to qualified service personnel only.
Accessories and specifications
Check for the following parts included in the package with the main unit:
Instruction manual x 1 Headshell x 1 AC cord x 1
Counter weight x 1 Target light x 1 Platter x1
RCA Cord X1 45 rpm adapter x 1 Slipmat x 1
Specifications
Power Supply AC 115/230V, 60/50Hz
Power Consumption 10Watts
Dimensions 450 (W) x 353 (D) x 144.6 (H) mm
Weight 10 Kg
Controls and functions
EN 2
1. Phono / Line output
Connect the turntable to any phono or line level
input,using the supplied cinch/cinch cable. Be sure
to put the phono/line switch in the right position.
2. Phono / Line switch
Depending on the position of the phono/line
switch, you can connect the turntable to any
phono or line level input.
3. Additional Line output
Secondary line-level output.
4. Power cord connecter
Used to connect the included power cord.
5. AC voltage selector
Make sure the selector is set properly.
6. Counterweight
Adjustment creates the proper downward pressure
of the stylus to the record. Attach by sliding the
counterweight onto the rear of the tone arm. Twist
it lightly and it will screw onto the rear shaft of the
tonearm.
7. Tonearm height adjustment
Adjust the hight of the tonearm.
8. Anti skate knob
(Only applies on “S” tonearm)
When a record is playing, a force is generated
drawing the stylus towards the center of the
record. This control compensates for that force
and needs to be set to the same value as the
counterweight pressure ring.
9. Tonearm lift
This elevates the tone arm above the record
surface.
10. Tonearm clamp and rest
Use this rest for the tonearm and clamp it in
position during transportation.
11. Pitch select
Sets the adjustment range of the pitch slider.
Press the button to switch between
+/-8%, +/-16% and +/-50% pitch.
12. Tonearm
13. Headshell locking nut
Attach the headshell by inserting it into the front
end of the tonearm and then turn the locking nut
clockwise.
14. Pitch slider
Use this to change the speed of the platter.
15. Quartz lock
on - will hold the speed at 0%
off - will allow the use of the pitch adjust.
16. Reverse button
This button is used to reverse the direction of the
platter rotation.
17. Motor start / brake adjustment
Adjust the starting and braking time of the motor
by turning the control clockwise for a longer start
or stop time and counter-clockwise for the fastest
start or stop time.
18. Target light
Insert target light to the deck and it will light up.
19. Platter speeds
33 rpm and 45 rpm.
20. Start / stop button
Press the button to start / stop the turntable.
21. Power switch
This switch turns the power on or off.
22. Platter
23. 45 RPM adapter
Place on center spindle for playing 7” records with
large center holes.

Termékspecifikációk

Márka: Mixars
Kategória: lemezjátszó
Modell: LTA

Szüksége van segítségre?

Ha segítségre van szüksége Mixars LTA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók lemezjátszó Mixars

Mixars

Mixars LTA Útmutató

20 Augusztus 2024

Útmutatók lemezjátszó

Legújabb útmutatók lemezjátszó

Victrola

Victrola VPT-800 Útmutató

12 December 2024
Pro-Ject

Pro-Ject X2B Útmutató

11 December 2024
Denver

Denver VPR-190 Útmutató

9 December 2024
Audio-Technica

Audio-Technica VMN40ML Útmutató

7 December 2024
Audio-Technica

Audio-Technica VMN50SH Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT81CP Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-VMN95EN Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-VMN95SP Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-LH11H Útmutató

7 December 2024
Audio-Technica

Audio-Technica AT-OC9XEN Útmutató

7 December 2024