Használati útmutató Mitsubishi P93DW

Mitsubishi nyomtató P93DW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mitsubishi P93DW (31 oldal) a nyomtató kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/31
This digital monochrome printer complies with the requirements of the EC Directive 89/
336/EEC, 73/23/EEC, 93/42/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains proper
operation in residential areas, on business and light industrial premises and on small-
scale enterprises, inside as well as outside of the buildings. All places of operation are
characterised by their connection to the public low voltage power supply system.
DIGITAL MONOCHROME PRINTER
MODEL
P93DW
P93DE
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL MONOCHROME PRINTER.
DIGITAL MONOCHROME
PRINTER
OPEN
COPY
FEEDLOCKUPDOWN
BRT/CONT
BRT
CONT
LOCK
FOR THE MODEL P91DW(UB) ONLY
WARNING:
In the USA or Canada, use the AC power cord according to the recommendations as
below, in order to comply with UL2601-1 and CAN/CSA C22.2 No. 601.1.
Case 1. Connect to the 120V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or
higher rating connector and NEMA 5-15 type, 125V 10A or higher rating, Hospital
Grade plug.
Case 2. Connect to the 230V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or
higher rating connector and NEMA 6-15 type, 250V 10A or higher rating, Hospital
Grade plug.
Case 3. Connect to the 120V receptacle of the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 125V 10A or
higher rating connector and IEC320-2.2/E type, 125V 10A or higher rating plug.
Case 4. Connect to the 230V receptacle of the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT, size
16 or 18AWG, length 2.5m or shorter cord with IEC320/C13 type, 250V 10A or
higher rating connector and IEC320-2.2/E type, 250V 10A or higher rating plug.
CAUTION:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communica-
tions.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interfer-
ence at his or her own expense.
Information:
This class A digital apparatus complies with Canadian ICES-003.
"CLASSIFIED BY UNDERWRITERS LABORATORIES INC.®
WITH RESPECT TO ELECTRIC SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN
ACCORDANCE WITH UL2601-1 AND CAN/CSA C22.2 No. 601.1"
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
The “Caution, hot surface” symbol indicates that the marked item may be hot
and should not be touched.
The “ON/OFF” symbol indicates connection to or disconnection from the mains,
at least for mains switches.
The “Equipotentiality” symbol identifies the terminals connected each other. The
potential of various parts of equipment or of a system is equalized.
The “Alternating current” symbol indicates that the equipment is suitable for
alternating current only.
RISK OF ELECTRIC SHOCK DO NOT OPEN.
TO REDUCE THE RISK OF ELECTRIC SHOCK,DO NOT REMOVE COVER (OR
BACK)
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION:
When you dispose of the unit or accessories, you must obey the law in the relative area
or country and/or regulation in the relative hospital.

Termékspecifikációk

Márka: Mitsubishi
Kategória: nyomtató
Modell: P93DW

Szüksége van segítségre?

Ha segítségre van szüksége Mitsubishi P93DW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nyomtató Mitsubishi

Mitsubishi

Mitsubishi P93DW Útmutató

7 Október 2024
Mitsubishi

Mitsubishi CPK60 Útmutató

13 Szeptember 2024
Mitsubishi

Mitsubishi CP9550DW-S Útmutató

19 Augusztus 2024
Mitsubishi

Mitsubishi CP-D70DW Útmutató

31 Július 2024
Mitsubishi

Mitsubishi CP-D90DW Útmutató

29 Július 2024
Mitsubishi

Mitsubishi CP8000DW Útmutató

7 Július 2024
Mitsubishi

Mitsubishi CP9600DW Útmutató

7 Július 2024
Mitsubishi

Mitsubishi CP-D2E Útmutató

7 Július 2024
Mitsubishi

Mitsubishi P91W Útmutató

17 Május 2024
Mitsubishi

Mitsubishi CP9800DW Útmutató

11 Május 2024

Útmutatók nyomtató

Legújabb útmutatók nyomtató

Canon

Canon Pixma GM4030 Útmutató

3 Április 2025
Olivetti

Olivetti Artjet 10 Útmutató

3 Április 2025
Kyocera

Kyocera FS920 Útmutató

3 Április 2025
Samsung

Samsung MultiXpress SL-M4370 Útmutató

2 Április 2025
HP

HP Color LaserJet Managed Flow MFP E87640 Útmutató

2 Április 2025
HP

HP Photosmart 1218 Útmutató

2 Április 2025
HP

HP LaserJet Managed MFP E62655 Útmutató

2 Április 2025
HP

HP LaserJet Managed E40040 Útmutató

2 Április 2025
Toshiba TEC

Toshiba TEC e-STUDIO162 Útmutató

29 Március 2025
Videology

Videology 24C708AF-1 Útmutató

29 Március 2025