Használati útmutató Mitsubishi CP-D90DW

Mitsubishi nyomtató CP-D90DW

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mitsubishi CP-D90DW (27 oldal) a nyomtató kategóriában. Ezt az útmutatót 8 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/27
DIGITAL COLOR PRINTER
MODEL
CP-D90DW
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOR PRINTER.
OPERATION MANUAL
OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-
SHOOTING CONTENTS
WARNING :
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION :
TO REDUCE THE RISK OF ELECTRIC
SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufcient magnitude to constitute the risk of
electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
The “Caution, hot surface” symbol indicates that the marked item may be hot and
should not be touched.
The “Electro Static Discharge (ESD) warning” symbol indicates that trouble (including
equipment malfunction) due to static electricity may occur in certain conditions.
The “OFF/ON” symbol indicates connection to or disconnection from the mains, at
least for mains switches.
The “Alternating current” symbol indicates that the equipment is suitable for
alternating current only.
WARNING:
Use the included AC power cord so as not to interfere with radio and television reception.
If you use other cables, it may cause interference with radio and television reception.
OTHERSPRECAUTIONS FEATURES PREPARATION TROUBLE-
SHOOTING CONTENTS
CAUTION:
Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his or
her own expense.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
WARNING:
In the USA or Canada, use the AC power cord according to the recommendations as
below, in order to comply with UL60950-1 and CAN/CSA C22.2 No. 60950-1-03.
Connect to the 120 V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SVT, size
16 or 18AWG, length 2 m or shorter cord with IEC60320-1/C13 type, 125 V 10 A or
higher rating connector and NEMA 5-15 type, 125 V 10 A or higher rating plug.
Use the AC power cord as specied above, so as not to interfere with radio and
television reception.
If you use other cables, it may cause interference with radio and television reception.
WARNING:
In Europe, use the AC power cord according to the recommendations as below, in
order to comply with EN60950-1.
Connect to the 230 V receptacle of the room or the host equipment.
The AC power cord should be VDE approved and consist of core size 0.75 mm 2 or
bigger, length 2 m or shorter cord with IEC60320-1/C13 type, 250 V 10 A or higher
rating connector and CEE(7)VII type, 250 V 10 A or higher rating plug.
Use the AC power cord as specied above, so as not to interfere with radio and
television reception.
If you use other cables, it may cause interference with radio and television reception.
WARNING:
The socket outlet shall be installed near the equipment and shall be easily accessible.
WARNING:
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
This product is applicable to connect to Norwegian IT power distribution systems.
Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2012/19/EU Article 14 Information for users and Annex IX, and/or
to the directive 2006/66/EC Article 20 Information for end-users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and
components which can be recycled and/or reused.
This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of-life,
should be disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol means that the battery
or accumulator contains a heavy metal at a certain concentration. This will be indicated as follows:
Hg: mercury (0,0005%), Cd: cadmium (0,002%), Pb: lead (0,004%)
In the European Union there are separate collection systems for used electrical and electronic products,
batteries and accumulators.
Please, dispose of this equipment, batteries and accumulators correctly at your local community waste
collection/recycling centre.
Please, help us to conserve the environment we live in!

Termékspecifikációk

Márka: Mitsubishi
Kategória: nyomtató
Modell: CP-D90DW

Szüksége van segítségre?

Ha segítségre van szüksége Mitsubishi CP-D90DW, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nyomtató Mitsubishi

Mitsubishi

Mitsubishi P93DW Útmutató

7 Október 2024
Mitsubishi

Mitsubishi CPK60 Útmutató

13 Szeptember 2024
Mitsubishi

Mitsubishi CP9550DW-S Útmutató

19 Augusztus 2024
Mitsubishi

Mitsubishi CP-D70DW Útmutató

31 Július 2024
Mitsubishi

Mitsubishi CP-D90DW Útmutató

29 Július 2024
Mitsubishi

Mitsubishi CP8000DW Útmutató

7 Július 2024
Mitsubishi

Mitsubishi CP9600DW Útmutató

7 Július 2024
Mitsubishi

Mitsubishi P91W Útmutató

17 Május 2024
Mitsubishi

Mitsubishi CP9800DW Útmutató

11 Május 2024
Mitsubishi

Mitsubishi P91E Útmutató

7 Május 2024

Útmutatók nyomtató

Legújabb útmutatók nyomtató

Toshiba TEC

Toshiba TEC e-STUDIO162 Útmutató

29 Március 2025
Videology

Videology 24C708AF-1 Útmutató

29 Március 2025
Videology

Videology 24C708AF-SYS-1 Útmutató

29 Március 2025
Fujitsu

Fujitsu DL2400 Útmutató

24 Március 2025
Brother

Brother DCP-153C Útmutató

22 Március 2025
Epson

Epson TM-T88VI-iHub (751P1) Útmutató

19 Március 2025
HP

HP LASERJET1150 Útmutató

16 Január 2025
HP

HP Photosmart A610 series Útmutató

16 Január 2025
HP

HP Photosmart Wireless B110 series Útmutató

16 Január 2025
HP

HP LaserJet Pro MFP M28 Útmutató

16 Január 2025