Használati útmutató MIPRO ACT-30T

MIPRO AV hosszabbító ACT-30T

Olvassa el alább 📖 a magyar nyelvű használati útmutatót MIPRO ACT-30T (11 oldal) a AV hosszabbító kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/11
Specifications and design subject to change without notice. MN 014/03
All rights reserved. Do not copy or forward without prior approvals MIPRO.
ACT-30T Bodypack Transmitters
User Guide
2 CE 3 4 7 F
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarised or ground
plug: A polarised plug has two blades with one wider than
the other. The wide blade is provided for your safety. When
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plug, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
16. Apparatus should not be exposed to dripping or splashing
and no objects filled with liquids, should be placed on the
apparatus.
17. Use only with the battery which specified by manufacturer.
18. The power supply cord set is to be the main disconnected
device.
! IMPORTANT SAFETY INSTRUCTIONS ! WARNING
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
1. FOR OUTDOOR USE:
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
2. UNDER WET LOCATION:
Apparatus should not be exposed to dripping or splashing
and no objects filled with liquids, such as vases should be
placed on the apparatus.
3. SERVICE INSTRUCTIONS:
CAUTION - These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are
qualified to do so.
Dispose of any unusable devices or batteries
responsibly and in accordance with any applicable
regulations.
Disposing of used batteries with domestic waste is
to be avoided!
Batteries / NiCad cells often contain heavy metals
such as cadmium(Cd), mercury(Hg) and lead(Pb)
that makes them unsuitable for disposal with
domestic waste. You may return spent batteries/
accumulators free of charge to recycling centres or
anywhere else batteries/accumulators are sold.
By doing so, you contribute to the conservation of
our environment!
Disposal
20
20
20
202005
05
05
0505-
-
-
--08
08
08
0808-
-
-
--13
13
13
1313
0 1
Bodypack Transmitter Bodypack Transmitter
1 Bodypack Controls and Indicators
3 O
Display Screen
ransmitter Parameters
12 Battery Status
13
15 AF
attery Removal and Installation
perating Instructions
4 LCD
5 T
MUTE Control Set-Up
Input Connections
16 B
Contents
MUTE Button: To mute and un-mute the audio
signal temporary.
Audio Input Connector: TA4F mini 4-pin
connector accepts any MIPRO lavalier,
instrument and headset microphones and
cables. (See 5 ways of connection on AF Input
Connections)
2
2
2
22
1
1
1
11
Bodypack Controls and Indicators
07 03
CH GRP
07 03
CH GRP
2
2
2
22
3
3
3
33
4
4
4
44
5
5
5
55
8
8
8
88
12
12
12
1212
13
13
13
1313
1
1
1
11
6
6
6
66
7
7
7
77
9
9
9
99
11
11
11
1111
10
10
10
1010

Termékspecifikációk

Márka: MIPRO
Kategória: AV hosszabbító
Modell: ACT-30T

Szüksége van segítségre?

Ha segítségre van szüksége MIPRO ACT-30T, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók AV hosszabbító MIPRO

MIPRO

MIPRO ACT-30T Útmutató

25 Július 2024

Útmutatók AV hosszabbító

Legújabb útmutatók AV hosszabbító

DataVideo

DataVideo HBT-11 Útmutató

16 Január 2025
Kopul

Kopul RM-12XFRJ45 Útmutató

14 Január 2025
Kopul

Kopul XLR4M-RJ45 Útmutató

14 Január 2025
Kopul

Kopul RM-12XMRJ45 Útmutató

14 Január 2025
Kopul

Kopul XLR4F-RJ45 Útmutató

14 Január 2025
Kopul

Kopul RM-4X4XMFRJ45 Útmutató

14 Január 2025
Planet

Planet VF-106G-KIT Útmutató

13 Január 2025
Tripp Lite

Tripp Lite B127-008-D Útmutató

13 Január 2025
Lightware

Lightware UMX-TPS-TX140 Útmutató

12 Január 2025
Atlona

Atlona AT-AVA-EX70-2PS-KIT Útmutató

11 Január 2025