Használati útmutató Megger TDR500/3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Megger TDR500/3 (18 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/18
Page 1 1 of
M
TDR1000/3
TDR1000/3P
CFL510G
TDR500/3
Time Domain Reflectometers
User Manual
Page 3 3 of
G SAFETY WARNINGS
Safety warnings and precautions must be read and understood before the instrument is used. All Safety warnings and
precautions must be observed during use.
The circuit under test must be switched off, de energised, securely isolated - and proved safe before test connections are
made.
Use the correct lead se the Megger fused lead set must be used. Refer to the Test Lead selection t. On power systems page
in this user guide to identify the correct lead set.
The operator must verify that the circuit is safe before testing and take the appropriate precautions.
Ensure that hands remain behind guards of probes/clips when testing.
The instrument should not be used if any part of it is damaged. Also all test leads, probes and crocodile clips must be in
good order, clean and with no broken or cracked insulation.
Disconnect the test leads before removing the battery cover. The battery cover must be in place whilst conducting tests.
This product contains no user service parts.
All relevant safety procedures must be followed.
THE INSTRUMENT MUST ONLY BE USED BY SUITABLY
TRAINED AND COMPETENT PERSONS
Page 4 4 of
Symbols
The following symbols are used on this instrument
G
CAUTION: RISK OF DANGER
t
EQUIPMENT PROTECTED THROUGHOUT BY DOUBLE INSULATION OR REINFORCED
INSULATION
c
EQUIPMENT COMPLIES WITH RELEVANT EU DIRECTIVES
EQUIPMENT COMPLIES WITH AUSTRALIAN EMC REQUIREMENTS (C tick) (NOT FOR SAFETY)-
THIS EQUIPMENT SHOULD BE RECYCLED AS ELECTRONIC WASTE

Termékspecifikációk

Márka: Megger
Kategória: Mérőberendezések
Modell: TDR500/3

Szüksége van segítségre?

Ha segítségre van szüksége Megger TDR500/3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Mérőberendezések Megger

Megger

Megger HPG78 Útmutató

29 December 2024
Megger

Megger T99/1 Útmutató

1 Szeptember 2024
Megger

Megger DLRO10X Útmutató

1 Szeptember 2024
Megger

Megger TDR2050 Útmutató

30 Augusztus 2024
Megger

Megger PowerDB Útmutató

29 Augusztus 2024
Megger

Megger TM200 Útmutató

29 Augusztus 2024
Megger

Megger MIT210 Útmutató

20 Augusztus 2024
Megger

Megger TDR500/3 Útmutató

19 Augusztus 2024
Megger

Megger MIT230 Útmutató

18 Augusztus 2024
Megger

Megger MIT410/2 Útmutató

16 Augusztus 2024

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések

Uni-T

Uni-T UT220 Útmutató

3 Április 2025
Uni-T

Uni-T UT681C Útmutató

3 Április 2025
Uni-T

Uni-T UT216C Útmutató

3 Április 2025
Uni-T

Uni-T UT611 Útmutató

3 Április 2025
Uni-T

Uni-T UT210D Útmutató

3 Április 2025
Uni-T

Uni-T UT210C Útmutató

3 Április 2025
Uni-T

Uni-T UT210B Útmutató

3 Április 2025
Uni-T

Uni-T UT682 Útmutató

3 Április 2025
Uni-T

Uni-T UT275 Útmutató

3 Április 2025
Uni-T

Uni-T UT08A Útmutató

3 Április 2025