Használati útmutató Megger MIT410/2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Megger MIT410/2 (43 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/43
MIT400/2 Series
Insulation and continuity testers
User guide
www.megger.comMIT400/2 2
1. Introduction 3
2. G Safety Warnings 4
3. Symbols used on the instrument 5
4. General description 6
Unpacking the carton 6
Carton contents (all instruments) 6
5. Preparations for use (all instruments) 7
Batteries 7
Preliminary test lead check
6. General operating intsructions 8
General functions 8
LCD Display 9
Backlight operation 10
7. Test lead connections 11
Standard test leads 11
SP5 Switched probe (not MIT400/2, MIT480/2
and MIT40X) 11
8. AC/DC voltage and frequency
measurements 11
9. Insulation resistance testing - general 13
Standard insulation resistance testing 13
Insulation resistance testing –
timed modes ‘t’, PI and DAR 14
10. MIT40X testing 17
11. Continuity testing [Ω] and buzzer [ ] 18
12. Resistance measurements (kΩ Range) 19
13. Capacitance measurements 20
Capacitance measurement procedure 20
Distance measurement by capacitance 20
14. Setup options 20
15. Saving, recalling and downloading
test results. 23
Saving test results 23
Test results recall 23
PI and DAR recall. 24
16. Deleting test results 26
Procedure for deleting a single test result
(refer to Figure 16) 26
Procedure for deleting all test results
(refer to Figure 19) 27
Preparing your MIT430/2 or MIT485/2 for
“Bluetooth®” Communications 29
Preparing your MIT430/2 or MIT485/2
to your PC 29
Standard download operation 32
17. Battery and fuse replacement 32
Battery condition and replacement 32
Blown fuse indicator 33
18. Preventive maintenance 33
19. Specification 34
20. Basic and service errors 36
Basic error 36
Service error: 36
21. Accessories 37
22. Repair and Warranty 39
User guide contents
www.megger.comMIT400/2 3
1. Introduction
Thank you for purchasing the Megger insulation test instrument.
For your own safety and to get the maximum benefit from your instrument, please ensure that you read and understand the following
safety warnings and instructions before attempting to use the instruments.
This user guide describes the operation and functions of the MIT400/2 series of insulation and continuity test instruments.
These instruments are designed and manufactured by:
Megger Ltd
Archcliffe Road
Dover Kent CT17 9EN
England
Megger Limited reserves the right to change the specification of these instruments at any time without prior notice.

Termékspecifikációk

Márka: Megger
Kategória: Mérőberendezések
Modell: MIT410/2

Szüksége van segítségre?

Ha segítségre van szüksége Megger MIT410/2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Mérőberendezések Megger

Megger

Megger HPG78 Útmutató

29 December 2024
Megger

Megger T99/1 Útmutató

1 Szeptember 2024
Megger

Megger DLRO10X Útmutató

1 Szeptember 2024
Megger

Megger TDR2050 Útmutató

30 Augusztus 2024
Megger

Megger PowerDB Útmutató

29 Augusztus 2024
Megger

Megger TM200 Útmutató

29 Augusztus 2024
Megger

Megger MIT210 Útmutató

20 Augusztus 2024
Megger

Megger TDR500/3 Útmutató

19 Augusztus 2024
Megger

Megger MIT230 Útmutató

18 Augusztus 2024
Megger

Megger MIT410/2 Útmutató

16 Augusztus 2024

Útmutatók Mérőberendezések

Legújabb útmutatók Mérőberendezések

Uni-T

Uni-T UT220 Útmutató

3 Április 2025
Uni-T

Uni-T UT681C Útmutató

3 Április 2025
Uni-T

Uni-T UT216C Útmutató

3 Április 2025
Uni-T

Uni-T UT611 Útmutató

3 Április 2025
Uni-T

Uni-T UT210D Útmutató

3 Április 2025
Uni-T

Uni-T UT210C Útmutató

3 Április 2025
Uni-T

Uni-T UT210B Útmutató

3 Április 2025
Uni-T

Uni-T UT682 Útmutató

3 Április 2025
Uni-T

Uni-T UT275 Útmutató

3 Április 2025
Uni-T

Uni-T UT08A Útmutató

3 Április 2025