Használati útmutató Mackie MR10Smk3

Mackie mélynyomó MR10Smk3

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Mackie MR10Smk3 (16 oldal) a mélynyomó kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
O W N E R ’ S M A N U A L
Powered Studio Subwoofer
MR10Smk3
2
MR10Smk3
MR10Smk3
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with a cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
14.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15.
This apparatus shall not be exposed to dripping or splashing, and no
object filled with liquids, such as vases or beer glasses, shall be placed
on the apparatus.
16.
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
17.
This apparatus has been designed with Class-I construction and must
be connected to a mains socket outlet with a protective earthing con-
nection (the third grounding prong).
18.
This apparatus has been equipped with a rocker-style AC mains power
switch. This switch is located on the rear panel and should remain
readily accessible to the user.
19.
The MAINS plug or an appliance coupler is used as the disconnect
device, so the disconnect device shall remain readily operable.
PORTABLE CART
WARNING
CAUTION
The lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the prescence of uninsulated “dangerous voltage”
within the product’s enclosure, that may be of significant magnitude
to constitute a risk of electric shock to persons.
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
The exclamation point within an equilateral triangle is
intended to alert the user of the prescence of important
operating and maintaining (servicing) instructions in the
literature accompanying the appliance.
20. NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip-
ment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandthereceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfrom
that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
CAUTION: Changes or modifications to this device not expressly
approved by LOUD Technologies Inc. could void the user's authority to
operate the equipment under FCC rules.
21.
This apparatus does not exceed the Class A/Class B (whichever is
applicable)
limits for radio noise emissions from digital apparatus as
set out in the radio interference regulations of the Canadian Department
of Communications.
ATTENTION — Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant las limites applicables aux appareils
numériques de class A/de class B (selon le cas) prescrites dans le
réglement sur le brouillage radioélectrique édicté par les ministere des
communications du Canada.
22.
Exposure to extremely high noise levels may cause permanent hearing
loss. Individuals vary considerably in susceptibility to noise-induced
hearing loss, but nearly everyone will lose some hearing if exposed to
sufficiently intense noise for a period of time. The U.S. Government’s
Occupational Safety and Health Administration (OSHA) has specified
the permissible noise level exposures shown in the following chart.
According to OSHA, any exposure in excess of these permissible limits
could result in some hearing loss. To ensure against potentially danger-
ous exposure to high sound pressure levels, it is recommended that all
persons exposed to equipment capable of producing high sound pres-
sure levels use hearing protectors while the equipment is in operation.
Ear plugs or protectors in the ear canals or over the ears must be worn
when operating the equipment in order to prevent permanent hearing
loss if exposure is in excess of the limits set forth here:
Duration,
per day in
hours
Sound Level
dBA, Slow
Response
Typical Example
8 90 Duo in small club
6 92
4 95 Subway Train
3 97
2 100 Veryloudclassicalmusic
1.5 102
1 105 The Ballard Mallard screaming at
desTROYer about deadlines
0.5 110
0.25 or less 115 Loudest parts at a rock concert
WARNING — To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
CAUTION — To prevent electric shock hazard, do not connect
to mains power supply while grille is removed.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
Important Safety Instructions
Part No. SW0980 Rev. B 12/13
©2013 LOUD Technologies Inc. All Rights Reserved. 3
Owner’s Manual
Owner’s Manual
Contents MR10Smk3 Features
•
Powerful, deep extended bass for your
MRmk3 studio monitors
•
Designed for high-output and superior low-frequency
performance
•
120 watts of Class A/B amplification
•
10" glass aramid composite woofer
•
Shelf-ported for satisfying, deep low end
•
Stereo XLR and TRS connection offer input flexibility
•
Stereo balanced TRS outputs for connection to mains
•
Adjustable 40 Hz to 180 Hz crossover point
•
Polarity switch (0˚ / 180˚)
•
Rugged all-wood cabinet design built to last
•
Vibration-absorbing rubber feet minimize
undesirable resonances
•
Low-profile, soft-mesh grille cloth delivers
a sleek studio look
•
Allows your mains to focus on highs/mids
for optimum studio performance
Like us
Follow us
Watch our dang videos
Please write your serial number here for future
reference (i.e., insurance claims, tech support,
return authorization, make dad proud, etc.)
Purchased at:
Date of purchase:
IMPORTANT SAFETY INSTRUCTIONS ...............................................2
CONTENTS / FEATURES ...................................................................3
INTRODUCTION ...............................................................................4
QUICK START ...................................................................................5
REAR PANEL DESCRIPTION .............................................................6
1. POWER CONNECTION AND FUSE .....................................6
2. VOLTAGE SELECTOR SWITCH ............................................ 6
3. POWER SWITCH ..............................................................6
4. SIGNAL INPUTS ................................................................ 6
5. SIGNAL OUTPUTS ............................................................7
6. AUTO POWER SWITCH AND LED ...................................... 7
7. POLARITY SWITCH ........................................................... 7
8. CROSSOVER LEVEL...........................................................7
9. INPUT LEVEL ....................................................................7
10. CUSTOM-TUNED REAR SHELF PORT ...............................7
PROTECTION CIRCUITS ....................................................................8
OVEREXCURSION PROTECTION ...........................................8
THERMAL PROTECTION ........................................................ 8
INTEGRATED MAGNETIC SHIELDING .....................................8
INPUT SIGNAL WIRING ........................................................ 8
CARE AND CLEANING ......................................................................8
THE INS AND OUTS OF POLARITY .................................................... 9
APPENDIX A: SERVICE INFO ..........................................................10
TROUBLESHOOTING 10 ...........................................................
REPAIR 11 ...............................................................................
APPENDIX B: CONNECTORS ...........................................................12
APPENDIX C: TECHNICAL INFORMATION .......................................13
MR10Smk3 SPECIFICATIONS .................................................13
MR10Smk3 DIMENSIONS .....................................................14
MR10Smk3 BLOCK DIAGRAM ...............................................14
MR10Smk3 LIMITED WARRANTY .................................................. 15

Termékspecifikációk

Márka: Mackie
Kategória: mélynyomó
Modell: MR10Smk3

Szüksége van segítségre?

Ha segítségre van szüksége Mackie MR10Smk3, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók mélynyomó Mackie

Mackie

Mackie CR8SBT Útmutató

5 Január 2025
Mackie

Mackie HD1801 Útmutató

1 Szeptember 2024
Mackie

Mackie MRS10 Útmutató

28 Július 2024
Mackie

Mackie HD1501 Útmutató

26 Július 2024
Mackie

Mackie SRM1801 Útmutató

23 Július 2024
Mackie

Mackie MR10Smk3 Útmutató

13 Július 2024
Mackie

Mackie DRM18S Útmutató

11 Július 2024
Mackie

Mackie SRM 1850 Útmutató

7 Július 2024

Útmutatók mélynyomó

Legújabb útmutatók mélynyomó

Phase Technology

Phase Technology IW200-II Útmutató

4 Április 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Útmutató

2 Április 2025
SoundTube

SoundTube CM1001D Útmutató

2 Április 2025
JL Audio

JL Audio FS108-W5 Útmutató

31 Március 2025
Phase Technology

Phase Technology PL-12p Útmutató

30 Március 2025
ETON

ETON Graphit 8-2 Útmutató

19 Március 2025
ETON

ETON Graphit 8-4 Útmutató

19 Március 2025
ETON

ETON Graphit 10-4 Útmutató

19 Március 2025
ETON

ETON MW 10 FLAT Útmutató

19 Március 2025
ETON

ETON PW 8 Útmutató

19 Március 2025