Használati útmutató Luxul Apex XAP-1610

Luxul hozzáférési pont Apex XAP-1610

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Luxul Apex XAP-1610 (8 oldal) a hozzáférési pont kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
READ ME FIRST
QUICK INSTALL GUIDE
Apex
Wave 2 AC3100 Dual-Band Wireless
Access Point
XAP-1610
Includes:
Wave 2 AC3100 Dual-Band Wireless AP
Mounting Brackets and Hardware
PoE Injector and Power Adapter
Ethernet Cables
READ ME FIRST - CONTROLLER COMPATIBILITY
This XAP-1610 is compatible with the Luxul Wireless Controller for fast, easy
configuration and deployment of wireless networks with multiple APs.
nNote: If you’ll be using this AP with a Wireless Controller, refer to
the Quick Install Guide included with the Wireless Controller for
setup instructions.
nNote: Please check to make sure this AP is running the latest version of
firmware (as indicated at https://www.luxul.com/firmware-updates.
aspx) before continuing onto the next steps.
AP SETUP AND CONFIGURATION
1 Physical Installation
The XAP-1610 access point is designed for simple and ecient installation and
can be located one of three ways. First, the included mount is designed to
attach directly to several dierent regions’ standard electrical boxes. Second,
the XAP-1610 may be mounted on a ceiling or wall without a box by using the
included mount as a guide to mark attachment locations. Finally, the XAP-1610
can be placed on a flat surface by attaching the included rubber feet
to the mount.
cCaution: Attach the rubber feet to the mount and attach the mount to
the AP for flat surface placement to avoid overheating and failure.
XSingle Access Point Placement: Because the signal generated by the
XAP-1610 is omnidirectional, the unit should be located as near as possible
to the center of the desired coverage area.
XAP-1610 Single AP Coverage Pattern
XMultiple Access Point Placement: You may need to experiment with
AP placement to optimize the roaming experience. Place APs to ensure
adequate coverage, but not so far apart that there is no signal overlap.
Adjacent APs should overlap enough that the client device has a good
connection to the AP to which it is currently attached, but also sees the
next-nearest AP. Ideally, roaming clients should see signal strength of
two overlapping APs in the range of -60 to -70 dBm at the midway
point between two APs. To learn more about AP placement, visit
luxul.com/ap-placement.
XAP-1610 Multiple AP Coverage and Overlap
nNote: Consider using Ekahau HeatMapper to assist with this process,
available from www.ekahau.com. Luxul also oers an informative
“How-To” video on HeatMapper at luxul.com/how-to-videos.

Termékspecifikációk

Márka: Luxul
Kategória: hozzáférési pont
Modell: Apex XAP-1610

Szüksége van segítségre?

Ha segítségre van szüksége Luxul Apex XAP-1610, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók hozzáférési pont Luxul

Luxul

Luxul Xen XAP-1030 Útmutató

3 Szeptember 2024
Luxul

Luxul XAP-1240 Útmutató

3 Szeptember 2024
Luxul

Luxul Xen XAP-1020 Útmutató

3 Szeptember 2024
Luxul

Luxul Xen XAP-1040 Útmutató

3 Szeptember 2024
Luxul

Luxul Xen XAP-1010 Útmutató

3 Szeptember 2024
Luxul

Luxul XAP-810 Útmutató

3 Szeptember 2024
Luxul

Luxul XWO-BAP1 Útmutató

3 Szeptember 2024
Luxul

Luxul XWC-2000 Útmutató

3 Szeptember 2024
Luxul

Luxul XWC-1000 Útmutató

3 Szeptember 2024
Luxul

Luxul Apex XAP-1610 Útmutató

3 Szeptember 2024

Útmutatók hozzáférési pont

Legújabb útmutatók hozzáférési pont