Használati útmutató Lotronic ATM6500BT

Lotronic Vevő ATM6500BT

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Lotronic ATM6500BT (24 oldal) a Vevő kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/24
HIFI STEREO AMPLIFIER WITH BLUET OOTH & KARAOKE FUNCTION
AMPLIFICATEUR HIFI STEREO AVEC FONCTION BLUETOOTH & KARAOKE
HIFI STEREOVERSTÄRKER MIT BLUETOOTH & KARAOKE FUNKTION
HIFI STEREOVERSTERKER MET BLUETOOTH & KARAOKE FUNCTIE
AMPLIFICADOR HIFI STEREO CON FUNCIÓN BLUETOOTH & KARAOKE
AMPLIFICADOR HIFI STEREO COM A FUNÇÃO BLUETOOTH & KARAOKE
HIFI STEREO OJAČEVALEC Z BLUETOOTH IN KARAOKE
AMPLIFICATOR DE PUTERE CU FUNCTIE BLUETOOTH
ATM6500BT
GB - USER
MANUAL
F - MANUEL D’UTILISATION
D - BEDIENUNGSANLEITUNG
NL – HANDLEIDING
E – MANUAL DE USO
P- MANUAL DE INSTRUÇÕES
SLO - NAVODILA ZA UPORABO
RO - MANUAL DE UTILIZARE
©Copyright LOTRONIC 2015 ATM6500BT 1
SAFETY RECOMMENDATIONS
Before using the device, please check it for any possible damages. In case of damage do not operate it.
Unplug the UNIT if you do not use it for a certain time.
Do not expose the unit to mechanical stress and humidity.
Ensure sufficient ventilation around the unit. Do not cover the device and protect it from direct solar radiation.
Clean the device with a dry and soft cloth only.
Caution! Should the device itself get damaged, please let the repair to the manufacturer or to a qualified service
agent.
The unit must be connected to an earthed mains outlet only.
Keep out of the reach of children
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
Features
USB/SD card input
Spectrum Screen Display
2x microphone inputs with Echo & Volume control
FM tuner
Bluetooth function
Front panel
POWER: Press this button to power ON or OFF the unit
Play/Pause & Scan: Press this button to play the signal from USB/SD, Bluetooth. Press again to pause. In tuner mode,
press this button to scan all the available stations from the lowest frequency to highest frequency.
Previous: Press this button to go back to the beginning of the current track or move to the previous track.
Next: Press this button to move to the next track.
Repeat/Random: Press this button to select the repeat mode between REPEAT ONE, REPEAT ALL, RANDOM. The
default setting is repeat all.
Input: Press this button to cycle through the various inputs.
USB: Connect your USB flash drive here
SD: Connect your SD card here
DELAY: Use this knob to adjust the delay of microphone.
EQ MODE: Press this button to cycle through - s. the pre set equalizer mode
GB
©Copyright LOTRONIC 2015 ATM6500BT 2
Audio Function: Press this button to switch the control mode between bass, treble & master volume
MIC1 & MIC2: Connect your microphones here
MIC1 VOL: Use this knob to adjust the volume of microphone 1
MIC2 VOL: Use this knob to adjust the volume of microphone 2
MIC Treble: Use this knob to adjust the treble of microphone
MIC Bass: Use this knob to adjust the bass of microphone
ECHO: Use this knob to adjust the echo of microphone.
Master Volume: Use this knob to control the master volume
OPERATION
Select a central location for the amplifier.
Connect the speaker wires (red & black) to the + and terminals on the rear panel of the amplifier.
Connect your Surround boxes to the Surround inputs. Please note that the surround function only works when
Surround speakers are connected.
Connect the audio signal to the relevant sockets with the correct polarity.
Plug the mains lead in and switch the amplifier on once you have checked all connections.
Switch the audio sources on and adjust the master volume to the required level.
Karaoke: Plug a mic into MIC1 or MIC2 socket on the front panel. Before you use the mic, make sure that it is
switched off and the MIC volume button is set to the minimum. Connect the microphone, switch it on and adjust
slowly the volume and the echo.
If you don’t use the unit any longer, switch the amplifier off and disconnect it from the mains.
Signal Sources and their Connections:
Connect a DVD- -player or a CD player to the terminal AUDIO INPUT or a data storage unit to the USB-interface or
insert a SD-memory card in the suitable slot or activate the Bluetooth function on your smartphone.
Select the active signal source by pressing the INPUT button until the desired input source is displayed.
Use the MP3 CONTROL-function for controlling the files on a connected data storage unit.
If you wish to use the karaoke function of this device insert one or two microphones into MIC1 and MIC2. Their ,
signals are going to the signal output too.
Bluetooth Connection
The ATM6500BT is only discoverable when the input selected is Bluetooth. After selecting Bluetooth input mode on
the ATM6500BT, turn on the Bluetooth function on the cell phone and search the ATM6500BT. Its Bluetooth device
name is “ATM6500BT. Pair and connect after search. There is no pairing code.
Rear Panel:
Power supply: Connect the unit to the power outlet.
Main Speakers Outputs: Connect your speakers here to receive the signal from the ATM65 00BT
SURROUND SPEAKER OUTPUTS: Connect your surround speakers here. Surround only works when all surround
©Copyright LOTRONIC 2015 ATM6500BT 3

Termékspecifikációk

Márka: Lotronic
Kategória: Vevő
Modell: ATM6500BT

Szüksége van segítségre?

Ha segítségre van szüksége Lotronic ATM6500BT, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vevő Lotronic

Lotronic

Lotronic ATM6000BT Útmutató

19 Augusztus 2024
Lotronic

Lotronic ATM6500BT Útmutató

18 Augusztus 2024
Lotronic

Lotronic ATM8000BT Útmutató

15 Augusztus 2024

Útmutatók Vevő

Legújabb útmutatók Vevő