Használati útmutató Liberty Pumps 250

Liberty Pumps Pompa 250

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Liberty Pumps 250 (33 oldal) a Pompa kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/33

Installation Manual 7035000N

Heavy Duty Submersible Effluent/Dewatering Pumps

*Do not throw away or lose this manual.

Models

250- Series 1/3 HP

280- Series 1/2 HP

290- Series 3/4 HP

FL30- Series 1/3 HP

FL50- Series 1/2 HP

FLH60 Series 6/10 HP -

FL60- Series 6/10 HP

FL70- Series 3/4 HP

FL100- Series 1 HP

FL150- - Series 1 1/2 HP

FL200- Series 2 HP

Contents

 Safety Information

 General Information

 Dewatering/Sump Applications

 Effluent Applications

 Electrical Service and Operation

 Maintenance and Troubleshooting

 Warranty

7000 Apple Tree Avenue

Bergen, NY 14416

Phone: (800) 543-2550

Fax: (585) 494-1839

www.libertypumps.com

1. Safety Information

This safety alert symbol in your manual and on the pump is intended to alert you

to a potential risk for injury or death.

This is a safety alert symbol identifying risk of electric shock. It will be accompa-

nied with an instruction intended to minimize your potential risk of electric shock.

This is a safety alert symbol identifying risk of fire. It will be accompanied with an

instruction intended to minimize your potential risk of fire.

This is a safety alert symbol identifying risk of injury or death. It will be accompa-

nied with an instruction intended to minimize your potential risk of injury or death.

Warns of hazards that will cause serious injury or death.

Warns of hazards that can or will cause minor or moderate injury.

Warns of hazards that can cause personal injury, death, or property damage.

Signals an important instruction related to the pump. Failure to follow these in-

structions could result in pump component failure, or improper operation of the

unit, possibly resulting in property damage .

NOTICE

DANGER

WARNING

CAUTION

 ALWAYS disconnect the supplied pump(s) from their power sources before handling or making any adjustments to

either the pump(s), the pump system, or the control panel.

 Only qualified personnel should complete fixed wiring and electrical connections, according to all local and national

electrical codes, during a pump system installation.

 After installation, be certain that the pump is properly grounded, using its supplied grounding conductor. Failure to

properly ground the pump system can cause all metal portions of the pump and its surroundings to become ener-

gized.

 During flood conditions, submerged electrical connections can energize the water. Always wear dielectric rubber

boots and other applicable Personal Protective Equipment (PPE) when water is on the floor and you must service an

energized pump system. DO NOT ENTER THE WATER if the water level is higher than that of the protection your

PPE offers or if your PPE is not watertight.

 NEVER lift or carry a pump or a float assembly by its power cord. This will damage the power cord, and could ex-

pose the electrically live wires inside the power cord.

 DO NOT bypass grounding wires.

 The electrical power supply shall be located within the length limitations of the pump power cord, and for below

grade installations it shall be at least 1.22 m (4 ft) above the floor level.

 NEVER use this product in applications where human contact with the pumped fluid is common (such as swimming

pools, fountains, marine areas, etc.).

RISK OF ELECTRIC SHOCK - Accidental contact with

electrically live parts, items, fluid, or water can cause serious in-

jury or death.

WARNING

 During construction, if the pump system is installed before its power cord can be plugged in or direct wired, all power

cords must be protected from the environment to prevent water from wicking through the cord end into the pump or

switch housings. If water enters these housings, an electrical short can occur from the pump or switch to its sur-

roundings, which will energize the surroundings.

 DO NOT use an extension cord to power the product. Extension cords can overload both the product and extension

cord supply wires. Overloaded wires will get very hot and can catch on fire.

 This product requires a separate, properly fused and grounded branch circuit, sized for the voltage and amperage

requirements of the pump, as noted on the nameplate. Overloaded branch circuit wires will get very hot and can

catch on fire.

 NEVER use this product with or near flammable liquids. If the rotating elements inside this pump strike any foreign

object, sparks may occur. Sparks could ignite flammable liquids.

 This pump system must be installed in accordance with all applicable codes and ordinances.

 DO NOT allow children to play with the pump system.

 DO NOT allow children, or any person who is unqualified, to use this pump system. Any person who is unaware of

the dangers of this pump system, or whom has not read this manual, can easily be injured by the pump system.

 Wear adequate PPE when working on pumps or piping that have been exposed to wastewater. Sump and sewage

pumps often handle materials which can transmit illness or disease upon contact with your skin and other tissues.

 DO NOT remove any tags or labels from the pump or its cord.

NOTICE

RISK OF ELECTRIC SHOCK -cont inued

WARNING

RISK OF FIRE

WARNING

RISK OF SERIOUS INJURY OR DEATH

 NEVER dispose of materials such as paint thinner or other chemicals down drains. Doing so could chemically attack

and damage pump system components and cause product malfunction or failure.

 DO NOT use pumps with fluid over 40°C. Operating the pump in fluid above this temperature can overheat the

pump, resulting in pump failure.

 DO NOT use pump system with mud, sand, cement, oil or chemicals. Pump and system components can be dam-

aged from these items causing product malfunction or failure. Additionally, flooding can occur if these items jam the

impeller or piping.

 DO NOT modify the pump system in any way. Modifications may affect seals, change the electrical loading of the

pump, or damage the pump and its components. Modifications can void your warranty on this product.

 DO NOT run this pump system dry.

Termékspecifikációk

Márka:	Liberty Pumps
Kategória:	Pompa
Modell:	250

Szüksége van segítségre?

Ha segítségre van szüksége Liberty Pumps 250, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Pompa Liberty Pumps

Liberty Pumps 250 Útmutató

1 Október 2024

Liberty Pumps 457 Útmutató

1 Október 2024

Liberty Pumps 230 Útmutató

1 Október 2024

Liberty Pumps CSP-257 Útmutató

1 Október 2024

Liberty Pumps LE51A Útmutató

18 Augusztus 2024

Útmutatók Pompa

Legújabb útmutatók Pompa

Einhell Royal TMP-R 400 Útmutató

5 December 2024

Gardena RWT Pump 2000/2 Li-18 Útmutató

16 Október 2024

Ozito PTP-012A Útmutató

15 Október 2024

15 Október 2024

15 Október 2024

15 Október 2024

15 Október 2024

Nefit VentiLine Útmutató

12 Október 2024

PowerPlus POWXG9513 Útmutató

7 Október 2024

Bestway Flowclear 58647 Útmutató

2 Október 2024