Használati útmutató La Crosse XG-20
Olvassa el alább 📖 a magyar nyelvű használati útmutatót La Crosse XG-20 (36 oldal) a óra kategóriában. Ezt az útmutatót 7 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/36
Instruction Manual
3
2 4
XG-20
1.0 Introduction 3.0 Major Function Modes
light
button
start/stop
button
compass
mode
button
Alarm Mode
Chronograph
Mode
Lap Memory
Recall Mode
Countdown
Timer Mode
Pacer Mode
Dual Time Mode
2.0 Parts and Its Functions
besel
compass
button
Compass Mode
compass
button
Thanks for your purchase of the XG-20.
Your
the compass directions.
Your
XG-20 provides directions to you at the time
while you are hiking, climbing and doing other
also includes normal time, daily alarm,
countdown timer, dual time and
Your
is carefully designed and produced for
outdoor activities, in order to utilize the features of your
watch, it is advisable to read the following instructions:
Read the instruction before you use the XG-20.
- Avoid exposing your XG-20 to extreme
conditions for an unreasonable time.
- Avoid rough uses or severe impacts to your
.
-
Do not open the XG-20's case unless a
certified service agency because your XG-20
contains precise electronic sensor and
- Clean your XG-20 with a soft cloth occasionally to
increase the life of your watch.
- Keep your XG-20 away from magnets or
appliances which contain magnetic objects such as
mobile phones, speakers and motors.
XG-20 features electronic sensors that measures
outdoor
activities.
Your XG-20 chronograph.
XG-20
-
XG-20
components.
- Store your XG-20 in a dry place when it is not in use.
Mode Button
- To select between various modes: Current Time, Alarm
Time, Chronograph, Lap Memory Recall, Countdown
Timer and Dual Time Mode.
- Press and hold for 2 seconds to change to the setting
displays in various modes.
- To select among items to be set during the setting
sequence.
- To select between normal compass bearing and
backward bearing display in Compass Mode.
Start/Stop Button
- To start/stop the timer/chronograph.
- To lock/unlock the compass bearing.
- To increase the number during setting sequences.
- To review the lap memories by forward reviewing
Compass Button
- To select between Current Time and Compass Mode.
- To decrease the number during setting sequences.
- To select Lap/reset function in Chronograph Mode.
- To reset the timer in Countdown Timer Mode.
Light Button
- Press once to turn on the EL back light for about 3
seconds.
- Press and hold for 2 seconds to enable/disable auto
light. If auto light is enabled, pressing any button will
turn on the back light for about 3 seconds.
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
Remarks1:
If the chronograph is running, the
Lap Memory Recall Mode will be reserved for the lap
memory recording, hence it can not be reviewed during this period of time.
*1
mode
button
Current Time Mode
AL
CH
REC
CH
TM
pu strap
light
button
display
Instruction Manual
3
2 4
XG-20
1.0 Introduction 3.0 Major Function Modes
light
button
start/stop
button
compass
mode
button
Alarm Mode
Chronograph
Mode
Lap Memory
Recall Mode
Countdown
Timer Mode
Pacer Mode
Dual Time Mode
2.0 Parts and Its Functions
besel
compass
button
Compass Mode
compass
button
Thanks for your purchase of the XG-20.
Your
the compass directions.
Your
XG-20 provides directions to you at the time
while you are hiking, climbing and doing other
also includes normal time, daily alarm,
countdown timer, dual time and
Your
is carefully designed and produced for
outdoor activities, in order to utilize the features of your
watch, it is advisable to read the following instructions:
Read the instruction before you use the XG-20.
- Avoid exposing your XG-20 to extreme
conditions for an unreasonable time.
- Avoid rough uses or severe impacts to your
.
-
Do not open the XG-20's case unless a
certified service agency because your XG-20
contains precise electronic sensor and
- Clean your XG-20 with a soft cloth occasionally to
increase the life of your watch.
- Keep your XG-20 away from magnets or
appliances which contain magnetic objects such as
mobile phones, speakers and motors.
XG-20 features electronic sensors that measures
outdoor
activities.
Your XG-20 chronograph.
XG-20
-
XG-20
components.
- Store your XG-20 in a dry place when it is not in use.
Mode Button
- To select between various modes: Current Time, Alarm
Time, Chronograph, Lap Memory Recall, Countdown
Timer and Dual Time Mode.
- Press and hold for 2 seconds to change to the setting
displays in various modes.
- To select among items to be set during the setting
sequence.
- To select between normal compass bearing and
backward bearing display in Compass Mode.
Start/Stop Button
- To start/stop the timer/chronograph.
- To lock/unlock the compass bearing.
- To increase the number during setting sequences.
- To review the lap memories by forward reviewing
Compass Button
- To select between Current Time and Compass Mode.
- To decrease the number during setting sequences.
- To select Lap/reset function in Chronograph Mode.
- To reset the timer in Countdown Timer Mode.
Light Button
- Press once to turn on the EL back light for about 3
seconds.
- Press and hold for 2 seconds to enable/disable auto
light. If auto light is enabled, pressing any button will
turn on the back light for about 3 seconds.
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
Remarks1:
If the chronograph is running, the
Lap Memory Recall Mode will be reserved for the lap
memory recording, hence it can not be reviewed during this period of time.
*1
mode
button
Current Time Mode
AL
CH
REC
CH
TM
pu strap
light
button
display
Instruction Manual
3
2 4
XG-20
1.0 Introduction 3.0 Major Function Modes
light
button
start/stop
button
compass
mode
button
Alarm Mode
Chronograph
Mode
Lap Memory
Recall Mode
Countdown
Timer Mode
Pacer Mode
Dual Time Mode
2.0 Parts and Its Functions
besel
compass
button
Compass Mode
compass
button
Thanks for your purchase of the XG-20.
Your
the compass directions.
Your
XG-20 provides directions to you at the time
while you are hiking, climbing and doing other
also includes normal time, daily alarm,
countdown timer, dual time and
Your
is carefully designed and produced for
outdoor activities, in order to utilize the features of your
watch, it is advisable to read the following instructions:
Read the instruction before you use the XG-20.
- Avoid exposing your XG-20 to extreme
conditions for an unreasonable time.
- Avoid rough uses or severe impacts to your
.
-
Do not open the XG-20's case unless a
certified service agency because your XG-20
contains precise electronic sensor and
- Clean your XG-20 with a soft cloth occasionally to
increase the life of your watch.
- Keep your XG-20 away from magnets or
appliances which contain magnetic objects such as
mobile phones, speakers and motors.
XG-20 features electronic sensors that measures
outdoor
activities.
Your XG-20 chronograph.
XG-20
-
XG-20
components.
- Store your XG-20 in a dry place when it is not in use.
Mode Button
- To select between various modes: Current Time, Alarm
Time, Chronograph, Lap Memory Recall, Countdown
Timer and Dual Time Mode.
- Press and hold for 2 seconds to change to the setting
displays in various modes.
- To select among items to be set during the setting
sequence.
- To select between normal compass bearing and
backward bearing display in Compass Mode.
Start/Stop Button
- To start/stop the timer/chronograph.
- To lock/unlock the compass bearing.
- To increase the number during setting sequences.
- To review the lap memories by forward reviewing
Compass Button
- To select between Current Time and Compass Mode.
- To decrease the number during setting sequences.
- To select Lap/reset function in Chronograph Mode.
- To reset the timer in Countdown Timer Mode.
Light Button
- Press once to turn on the EL back light for about 3
seconds.
- Press and hold for 2 seconds to enable/disable auto
light. If auto light is enabled, pressing any button will
turn on the back light for about 3 seconds.
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
Remarks1:
If the chronograph is running, the
Lap Memory Recall Mode will be reserved for the lap
memory recording, hence it can not be reviewed during this period of time.
*1
mode
button
Current Time Mode
AL
CH
REC
CH
TM
pu strap
light
button
display
Instruction Manual
3
2 4
XG-20
1.0 Introduction 3.0 Major Function Modes
light
button
start/stop
button
compass
mode
button
Alarm Mode
Chronograph
Mode
Lap Memory
Recall Mode
Countdown
Timer Mode
Pacer Mode
Dual Time Mode
2.0 Parts and Its Functions
besel
compass
button
Compass Mode
compass
button
Thanks for your purchase of the XG-20.
Your
the compass directions.
Your
XG-20 provides directions to you at the time
while you are hiking, climbing and doing other
also includes normal time, daily alarm,
countdown timer, dual time and
Your
is carefully designed and produced for
outdoor activities, in order to utilize the features of your
watch, it is advisable to read the following instructions:
Read the instruction before you use the XG-20.
- Avoid exposing your XG-20 to extreme
conditions for an unreasonable time.
- Avoid rough uses or severe impacts to your
.
-
Do not open the XG-20's case unless a
certified service agency because your XG-20
contains precise electronic sensor and
- Clean your XG-20 with a soft cloth occasionally to
increase the life of your watch.
- Keep your XG-20 away from magnets or
appliances which contain magnetic objects such as
mobile phones, speakers and motors.
XG-20 features electronic sensors that measures
outdoor
activities.
Your XG-20 chronograph.
XG-20
-
XG-20
components.
- Store your XG-20 in a dry place when it is not in use.
Mode Button
- To select between various modes: Current Time, Alarm
Time, Chronograph, Lap Memory Recall, Countdown
Timer and Dual Time Mode.
- Press and hold for 2 seconds to change to the setting
displays in various modes.
- To select among items to be set during the setting
sequence.
- To select between normal compass bearing and
backward bearing display in Compass Mode.
Start/Stop Button
- To start/stop the timer/chronograph.
- To lock/unlock the compass bearing.
- To increase the number during setting sequences.
- To review the lap memories by forward reviewing
Compass Button
- To select between Current Time and Compass Mode.
- To decrease the number during setting sequences.
- To select Lap/reset function in Chronograph Mode.
- To reset the timer in Countdown Timer Mode.
Light Button
- Press once to turn on the EL back light for about 3
seconds.
- Press and hold for 2 seconds to enable/disable auto
light. If auto light is enabled, pressing any button will
turn on the back light for about 3 seconds.
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
mode
button
Remarks1:
If the chronograph is running, the
Lap Memory Recall Mode will be reserved for the lap
memory recording, hence it can not be reviewed during this period of time.
*1
mode
button
Current Time Mode
AL
CH
REC
CH
TM
pu strap
light
button
display
Alarm Time Mode
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the alarm time: hour,
minute.
- The indicators around the display show the
current time in 1 second resolution.
To Set the Chime ON/OFF
- Press the [compass] button to change the ON/OFF status
of the hourly chime, in the Alarm Time Mode.
- When the chime indicator is shown (chime ON), the
beeps every hour on the hour
.
To Set the Alarm ON/OFF
- Press the [start/stop] button to change the ON/OFF
status of the alarm, in the Alarm Time Mode.
- When the alarm indicator is shown (alarm ON), the
sounds at the pre-set alarm time every day.
XG-20
XG-20
To Set the Alarm Time
- Press and hold the [mode] button for 2 seconds to change
from Alarm Time Mode to Alarm Time Setting Mode.
- The minute digits flash on the display because it is being
selected.
The Setting Procedures
- Press [mode] button to change the selection following the
Alarm Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold the
[compass] button to change the number at a higher speed.
- After you set the alarm time, press the [mode] button to
exit the setting sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will auto return to Alarm Time Mode.
5
6
7
Current Time Mode
- The 1st row of the display shows the day of week.
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the calendar: month,
day.
- The indicators around the display show the current time
in 1 second resolution.
To Set the Current Time and Date
- To set the current time and the date, press and
hold the [mode] button for 2 seconds to change the
display from the Current Time Mode to Current Time
Setting Mode.
- The second digits flash on the display because they are
being selected.
The Setting Procedures
- Press [mode] button to change the selections following the
Current Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold
the [compass] button to change the number at a higher
speed.
- While 12/24 hour format setting is selected, press
the [start/stop] or [compass] button once to select between
12 or 24 hour format.
- After you set the current time, calendar and 12/24 hour
format, press the [mode] button to exit the Current Time
Setting Sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Current Time Mode.
hold
mode
hold
mode
Current Time Setting Mode
Current Time Setting
Alarm Time Setting Mode
Alarm Time Setting
Current Time Mode
Alarm Time Mode
second
minute
12/24
hour format
minute
hour
hour
day
year
month
Current Time Setting Sequence
Current Time Setting Sequence
Alarm Time Setting Sequence
Alarm Time Setting Sequence
hold
mode hold
mode
mode
button mode
button
mode
button
mode
button mode
button
mode
button
8
5.0 Alarm Time Mode - Setting the Alarm and Chime On/Off
5.1 Alarm Time Mode - Setting the Alarm Time
mode
button
mode
button
mode
button
4.0 Current Time Mode - Current Time & Calendar
4.1 Current Time Mode - Setting Current Time & Calendar
digits have been
selected (flashing)
digits have been
selected
(flashing)
Calendar
(month-day)
alarm time
(hour-minute)
analog
second
analog
second
current time
(hour:minute
second)
current time
(hour: minute,
second)
day of week
AL
AL
Increase
the number Increase
the number
increase the
number at
a higher speed increase the
number at
a higher speed
start/stop button
start/stop button
hold start/stop
hold start/stop
decrease
the number
decrease
the number
decrease the
number at
a higher speed
decrease the
number at
a higher speed
hold compass
hold compass
compass button
compass button
TM
TM
Alarm Time Mode
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the alarm time: hour,
minute.
- The indicators around the display show the
current time in 1 second resolution.
To Set the Chime ON/OFF
- Press the [compass] button to change the ON/OFF status
of the hourly chime, in the Alarm Time Mode.
- When the chime indicator is shown (chime ON), the
beeps every hour on the hour
.
To Set the Alarm ON/OFF
- Press the [start/stop] button to change the ON/OFF
status of the alarm, in the Alarm Time Mode.
- When the alarm indicator is shown (alarm ON), the
sounds at the pre-set alarm time every day.
XG-20
XG-20
To Set the Alarm Time
- Press and hold the [mode] button for 2 seconds to change
from Alarm Time Mode to Alarm Time Setting Mode.
- The minute digits flash on the display because it is being
selected.
The Setting Procedures
- Press [mode] button to change the selection following the
Alarm Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold the
[compass] button to change the number at a higher speed.
- After you set the alarm time, press the [mode] button to
exit the setting sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will auto return to Alarm Time Mode.
5
6
7
Current Time Mode
- The 1st row of the display shows the day of week.
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the calendar: month,
day.
- The indicators around the display show the current time
in 1 second resolution.
To Set the Current Time and Date
- To set the current time and the date, press and
hold the [mode] button for 2 seconds to change the
display from the Current Time Mode to Current Time
Setting Mode.
- The second digits flash on the display because they are
being selected.
The Setting Procedures
- Press [mode] button to change the selections following the
Current Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold
the [compass] button to change the number at a higher
speed.
- While 12/24 hour format setting is selected, press
the [start/stop] or [compass] button once to select between
12 or 24 hour format.
- After you set the current time, calendar and 12/24 hour
format, press the [mode] button to exit the Current Time
Setting Sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Current Time Mode.
hold
mode
hold
mode
Current Time Setting Mode
Current Time Setting
Alarm Time Setting Mode
Alarm Time Setting
Current Time Mode
Alarm Time Mode
second
minute
12/24
hour format
minute
hour
hour
day
year
month
Current Time Setting Sequence
Current Time Setting Sequence
Alarm Time Setting Sequence
Alarm Time Setting Sequence
hold
mode hold
mode
mode
button mode
button
mode
button
mode
button mode
button
mode
button
8
5.0 Alarm Time Mode - Setting the Alarm and Chime On/Off
5.1 Alarm Time Mode - Setting the Alarm Time
mode
button
mode
button
mode
button
4.0 Current Time Mode - Current Time & Calendar
4.1 Current Time Mode - Setting Current Time & Calendar
digits have been
selected (flashing)
digits have been
selected
(flashing)
Calendar
(month-day)
alarm time
(hour-minute)
analog
second
analog
second
current time
(hour:minute
second)
current time
(hour: minute,
second)
day of week
AL
AL
Increase
the number Increase
the number
increase the
number at
a higher speed increase the
number at
a higher speed
start/stop button
start/stop button
hold start/stop
hold start/stop
decrease
the number
decrease
the number
decrease the
number at
a higher speed
decrease the
number at
a higher speed
hold compass
hold compass
compass button
compass button
TM
TM
Alarm Time Mode
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the alarm time: hour,
minute.
- The indicators around the display show the
current time in 1 second resolution.
To Set the Chime ON/OFF
- Press the [compass] button to change the ON/OFF status
of the hourly chime, in the Alarm Time Mode.
- When the chime indicator is shown (chime ON), the
beeps every hour on the hour
.
To Set the Alarm ON/OFF
- Press the [start/stop] button to change the ON/OFF
status of the alarm, in the Alarm Time Mode.
- When the alarm indicator is shown (alarm ON), the
sounds at the pre-set alarm time every day.
XG-20
XG-20
To Set the Alarm Time
- Press and hold the [mode] button for 2 seconds to change
from Alarm Time Mode to Alarm Time Setting Mode.
- The minute digits flash on the display because it is being
selected.
The Setting Procedures
- Press [mode] button to change the selection following the
Alarm Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold the
[compass] button to change the number at a higher speed.
- After you set the alarm time, press the [mode] button to
exit the setting sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will auto return to Alarm Time Mode.
5
6
7
Current Time Mode
- The 1st row of the display shows the day of week.
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the calendar: month,
day.
- The indicators around the display show the current time
in 1 second resolution.
To Set the Current Time and Date
- To set the current time and the date, press and
hold the [mode] button for 2 seconds to change the
display from the Current Time Mode to Current Time
Setting Mode.
- The second digits flash on the display because they are
being selected.
The Setting Procedures
- Press [mode] button to change the selections following the
Current Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold
the [compass] button to change the number at a higher
speed.
- While 12/24 hour format setting is selected, press
the [start/stop] or [compass] button once to select between
12 or 24 hour format.
- After you set the current time, calendar and 12/24 hour
format, press the [mode] button to exit the Current Time
Setting Sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Current Time Mode.
hold
mode
hold
mode
Current Time Setting Mode
Current Time Setting
Alarm Time Setting Mode
Alarm Time Setting
Current Time Mode
Alarm Time Mode
second
minute
12/24
hour format
minute
hour
hour
day
year
month
Current Time Setting Sequence
Current Time Setting Sequence
Alarm Time Setting Sequence
Alarm Time Setting Sequence
hold
mode hold
mode
mode
button mode
button
mode
button
mode
button mode
button
mode
button
8
5.0 Alarm Time Mode - Setting the Alarm and Chime On/Off
5.1 Alarm Time Mode - Setting the Alarm Time
mode
button
mode
button
mode
button
4.0 Current Time Mode - Current Time & Calendar
4.1 Current Time Mode - Setting Current Time & Calendar
digits have been
selected (flashing)
digits have been
selected
(flashing)
Calendar
(month-day)
alarm time
(hour-minute)
analog
second
analog
second
current time
(hour:minute
second)
current time
(hour: minute,
second)
day of week
AL
AL
Increase
the number Increase
the number
increase the
number at
a higher speed increase the
number at
a higher speed
start/stop button
start/stop button
hold start/stop
hold start/stop
decrease
the number
decrease
the number
decrease the
number at
a higher speed
decrease the
number at
a higher speed
hold compass
hold compass
compass button
compass button
TM
TM
Alarm Time Mode
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the alarm time: hour,
minute.
- The indicators around the display show the
current time in 1 second resolution.
To Set the Chime ON/OFF
- Press the [compass] button to change the ON/OFF status
of the hourly chime, in the Alarm Time Mode.
- When the chime indicator is shown (chime ON), the
beeps every hour on the hour
.
To Set the Alarm ON/OFF
- Press the [start/stop] button to change the ON/OFF
status of the alarm, in the Alarm Time Mode.
- When the alarm indicator is shown (alarm ON), the
sounds at the pre-set alarm time every day.
XG-20
XG-20
To Set the Alarm Time
- Press and hold the [mode] button for 2 seconds to change
from Alarm Time Mode to Alarm Time Setting Mode.
- The minute digits flash on the display because it is being
selected.
The Setting Procedures
- Press [mode] button to change the selection following the
Alarm Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold the
[compass] button to change the number at a higher speed.
- After you set the alarm time, press the [mode] button to
exit the setting sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will auto return to Alarm Time Mode.
5
6
7
Current Time Mode
- The 1st row of the display shows the day of week.
- The 2nd row of the display shows the current time:
hour, minute and second.
- The 3rd row of the display shows the calendar: month,
day.
- The indicators around the display show the current time
in 1 second resolution.
To Set the Current Time and Date
- To set the current time and the date, press and
hold the [mode] button for 2 seconds to change the
display from the Current Time Mode to Current Time
Setting Mode.
- The second digits flash on the display because they are
being selected.
The Setting Procedures
- Press [mode] button to change the selections following the
Current Time Setting Sequence shown on the left.
- If the digits are flashing, press the [start/stop] button to
increase the number; hold the [start/stop] button
to change the number at a higher speed. Press the
[compass] button to decrease the number; hold
the [compass] button to change the number at a higher
speed.
- While 12/24 hour format setting is selected, press
the [start/stop] or [compass] button once to select between
12 or 24 hour format.
- After you set the current time, calendar and 12/24 hour
format, press the [mode] button to exit the Current Time
Setting Sequence.
- If no key-stoke has been activated for 30 seconds, the
setting display will return to Current Time Mode.
hold
mode
hold
mode
Current Time Setting Mode
Current Time Setting
Alarm Time Setting Mode
Alarm Time Setting
Current Time Mode
Alarm Time Mode
second
minute
12/24
hour format
minute
hour
hour
day
year
month
Current Time Setting Sequence
Current Time Setting Sequence
Alarm Time Setting Sequence
Alarm Time Setting Sequence
hold
mode hold
mode
mode
button mode
button
mode
button
mode
button mode
button
mode
button
8
5.0 Alarm Time Mode - Setting the Alarm and Chime On/Off
5.1 Alarm Time Mode - Setting the Alarm Time
mode
button
mode
button
mode
button
4.0 Current Time Mode - Current Time & Calendar
4.1 Current Time Mode - Setting Current Time & Calendar
digits have been
selected (flashing)
digits have been
selected
(flashing)
Calendar
(month-day)
alarm time
(hour-minute)
analog
second
analog
second
current time
(hour:minute
second)
current time
(hour: minute,
second)
day of week
AL
AL
Increase
the number Increase
the number
increase the
number at
a higher speed increase the
number at
a higher speed
start/stop button
start/stop button
hold start/stop
hold start/stop
decrease
the number
decrease
the number
decrease the
number at
a higher speed
decrease the
number at
a higher speed
hold compass
hold compass
compass button
compass button
TM
TM
CH
CH
CH
CH
6.0 Chronograph Mode - Chronograph 'All Zero' Mode
6.1 Chronograph Mode - Start/Stop the Chronograph
Chronograph Mode
- The Chronograph measures elapsed times and lap times.
- The display shows the 'All Zeros' Mode if the
chronograph has been selected the first time or the
chronograph has been reset.
- The 1st row of the display shows the current lap number
of the chronograph.
- The 2nd row of the display shows the lap time: minute,
second and 1/100 second.
- The 3rd row of the display shows the accumulated
running time: minute, second and 1/100 second.
NOTE: if the accumulated time is long than 1 hour, the display
shows chronograph time in hour, minute and second instead
of minute, second and 1/100 second.
- The indicators around the display shows the
chronograph time in 1/10 second.
NOTE: The maximum counting range of the chronograph is 9
hours 59 minutes and 59 seconds, hence the chronograph
will count continuously until it counts to that value or the
[start/stop] button is pressed.
To Start/Stop the Chronograph
- When the chronograph is stopped, press the [start/stop]
button once to start the chronograph; press the
[start/stop] button once again to stop the chronograph.
- The elapsed time between the two 'start/stop'
keystrokes will be shown on 3rd row of the
display.
- Repeat the above steps to get the
accumulated time the chronograph is running.
*
To Reset the Chronograph
-To record a new set of elapsed time, press and hold
the [compass] button for 2 seconds to reset the
chronograph to 'All Zeros' display when the
chronograph is stopped.
NOTE: If you reset the chronograph, the lap memory will be
reset at the same time.
Chronograph
'all zero' Mode
Chronograph Mode
(chronograph time is
not longer than 1 hour)
Chronograph Mode
(Chronograph time is
longer than 1 hour)
Chronograph
'all zero' Mode
Chronograph
'Running' Mode
Chronograph
'Running' Mode
Chronograph
'Stop' Mode
Chronograph
'Lap' Mode
Chronograph
'Running' Mode
CH
CH
lap time
lap time
'elaspe' time
since the
[ ] button
has been pressed
compass
lap time
lap number
lap number
lap number
lap number
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elaspsed' time
'hyphen'
separator
'colon'
separator
1/10 second
1/10 second
1/10 second
1/10 second
hold
compass
start/stop
compass
5 seconds
start/stop
start/stop
To Record Lap Memory
- The Chronograph Mode allows you to record
lap memory (maximum 42 lap memories).
- Press the [compass] button once to record the lap
memory while the chronograph is running.
- The lap number will be flashing on the 1st row of the
display.
- The lap time is displayed on the 2nd row of
the display for 5 seconds, then it shows the 'elapse' time
since the [compass] button has been pressed.
- The accumulated 'elapse' time will be displayed on the 3rd
row of the display.
-While the lap number and lap time are displaying, the
chronograph keeps running.
- Repeat the steps mentioned above to get another set of
lap memory.
To Reset Lap Memory
- Press and hold the [compass] button for 2 seconds to reset
the lap memory in the Chronograph Mode while the
chronograph was stopped.
6.2 Chronograph Mode - Record Lap Time
CH
CH
CH
CH
the next recorded
lap memories
2nd lap
memory
the last recorded
lap memory
(max. 42 memory)
Lap Memory Recall Mode
- The lap number flashes in the 1st row of the
display; the 'REC' indicator will appear at the
same time.
- The 2nd row of the display shows the lap time of
the current lap memory: minute, second and 1/100
second.
- The 3rd row of the display shows the accumulated
'elapse' time: minute, second and 1/100
second.
To Recall Lap Memory
- Press the [start/stop] button to check the lap
memories through forward reviewing from lap 1 to
lap 42. Hold the [start/stop] button to change
lap memory at a higher speed.
- Press the [compass] button to check the lap
memories through backward reviewing from lap 42 to
lap 1. Hold the [compass] button to change lap
memory at a higher speed.
NOTE: Check the 'To Reset Lap Memory' section for lap
memory reset instructions.
NOTE: If the chronograph is running, the Lap Memory
Recall Mode will be reserved for the lap memory recording
and this mode can not be reviewed during this period of
time.
Lap Memory
Recall Mode
(1st Lap Memory)
Lap Memory Recall Sequence
start/stop
button
start/stop
button
start/stop
button
compass
button
compass
button
compass
button
lap time
accumulative
'elapse' time
lap number
7.0 Lap Memory Recall Mode - Recall Lap Time
9
10
11
12
REC
CH
CH
CH
CH
6.0 Chronograph Mode - Chronograph 'All Zero' Mode
6.1 Chronograph Mode - Start/Stop the Chronograph
Chronograph Mode
- The Chronograph measures elapsed times and lap times.
- The display shows the 'All Zeros' Mode if the
chronograph has been selected the first time or the
chronograph has been reset.
- The 1st row of the display shows the current lap number
of the chronograph.
- The 2nd row of the display shows the lap time: minute,
second and 1/100 second.
- The 3rd row of the display shows the accumulated
running time: minute, second and 1/100 second.
NOTE: if the accumulated time is long than 1 hour, the display
shows chronograph time in hour, minute and second instead
of minute, second and 1/100 second.
- The indicators around the display shows the
chronograph time in 1/10 second.
NOTE: The maximum counting range of the chronograph is 9
hours 59 minutes and 59 seconds, hence the chronograph
will count continuously until it counts to that value or the
[start/stop] button is pressed.
To Start/Stop the Chronograph
- When the chronograph is stopped, press the [start/stop]
button once to start the chronograph; press the
[start/stop] button once again to stop the chronograph.
- The elapsed time between the two 'start/stop'
keystrokes will be shown on 3rd row of the
display.
- Repeat the above steps to get the
accumulated time the chronograph is running.
*
To Reset the Chronograph
-To record a new set of elapsed time, press and hold
the [compass] button for 2 seconds to reset the
chronograph to 'All Zeros' display when the
chronograph is stopped.
NOTE: If you reset the chronograph, the lap memory will be
reset at the same time.
Chronograph
'all zero' Mode
Chronograph Mode
(chronograph time is
not longer than 1 hour)
Chronograph Mode
(Chronograph time is
longer than 1 hour)
Chronograph
'all zero' Mode
Chronograph
'Running' Mode
Chronograph
'Running' Mode
Chronograph
'Stop' Mode
Chronograph
'Lap' Mode
Chronograph
'Running' Mode
CH
CH
lap time
lap time
'elaspe' time
since the
[ ] button
has been pressed
compass
lap time
lap number
lap number
lap number
lap number
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elaspsed' time
'hyphen'
separator
'colon'
separator
1/10 second
1/10 second
1/10 second
1/10 second
hold
compass
start/stop
compass
5 seconds
start/stop
start/stop
To Record Lap Memory
- The Chronograph Mode allows you to record
lap memory (maximum 42 lap memories).
- Press the [compass] button once to record the lap
memory while the chronograph is running.
- The lap number will be flashing on the 1st row of the
display.
- The lap time is displayed on the 2nd row of
the display for 5 seconds, then it shows the 'elapse' time
since the [compass] button has been pressed.
- The accumulated 'elapse' time will be displayed on the 3rd
row of the display.
-While the lap number and lap time are displaying, the
chronograph keeps running.
- Repeat the steps mentioned above to get another set of
lap memory.
To Reset Lap Memory
- Press and hold the [compass] button for 2 seconds to reset
the lap memory in the Chronograph Mode while the
chronograph was stopped.
6.2 Chronograph Mode - Record Lap Time
CH
CH
CH
CH
the next recorded
lap memories
2nd lap
memory
the last recorded
lap memory
(max. 42 memory)
Lap Memory Recall Mode
- The lap number flashes in the 1st row of the
display; the 'REC' indicator will appear at the
same time.
- The 2nd row of the display shows the lap time of
the current lap memory: minute, second and 1/100
second.
- The 3rd row of the display shows the accumulated
'elapse' time: minute, second and 1/100
second.
To Recall Lap Memory
- Press the [start/stop] button to check the lap
memories through forward reviewing from lap 1 to
lap 42. Hold the [start/stop] button to change
lap memory at a higher speed.
- Press the [compass] button to check the lap
memories through backward reviewing from lap 42 to
lap 1. Hold the [compass] button to change lap
memory at a higher speed.
NOTE: Check the 'To Reset Lap Memory' section for lap
memory reset instructions.
NOTE: If the chronograph is running, the Lap Memory
Recall Mode will be reserved for the lap memory recording
and this mode can not be reviewed during this period of
time.
Lap Memory
Recall Mode
(1st Lap Memory)
Lap Memory Recall Sequence
start/stop
button
start/stop
button
start/stop
button
compass
button
compass
button
compass
button
lap time
accumulative
'elapse' time
lap number
7.0 Lap Memory Recall Mode - Recall Lap Time
9
10
11
12
REC
CH
CH
CH
CH
6.0 Chronograph Mode - Chronograph 'All Zero' Mode
6.1 Chronograph Mode - Start/Stop the Chronograph
Chronograph Mode
- The Chronograph measures elapsed times and lap times.
- The display shows the 'All Zeros' Mode if the
chronograph has been selected the first time or the
chronograph has been reset.
- The 1st row of the display shows the current lap number
of the chronograph.
- The 2nd row of the display shows the lap time: minute,
second and 1/100 second.
- The 3rd row of the display shows the accumulated
running time: minute, second and 1/100 second.
NOTE: if the accumulated time is long than 1 hour, the display
shows chronograph time in hour, minute and second instead
of minute, second and 1/100 second.
- The indicators around the display shows the
chronograph time in 1/10 second.
NOTE: The maximum counting range of the chronograph is 9
hours 59 minutes and 59 seconds, hence the chronograph
will count continuously until it counts to that value or the
[start/stop] button is pressed.
To Start/Stop the Chronograph
- When the chronograph is stopped, press the [start/stop]
button once to start the chronograph; press the
[start/stop] button once again to stop the chronograph.
- The elapsed time between the two 'start/stop'
keystrokes will be shown on 3rd row of the
display.
- Repeat the above steps to get the
accumulated time the chronograph is running.
*
To Reset the Chronograph
-To record a new set of elapsed time, press and hold
the [compass] button for 2 seconds to reset the
chronograph to 'All Zeros' display when the
chronograph is stopped.
NOTE: If you reset the chronograph, the lap memory will be
reset at the same time.
Chronograph
'all zero' Mode
Chronograph Mode
(chronograph time is
not longer than 1 hour)
Chronograph Mode
(Chronograph time is
longer than 1 hour)
Chronograph
'all zero' Mode
Chronograph
'Running' Mode
Chronograph
'Running' Mode
Chronograph
'Stop' Mode
Chronograph
'Lap' Mode
Chronograph
'Running' Mode
CH
CH
lap time
lap time
'elaspe' time
since the
[ ] button
has been pressed
compass
lap time
lap number
lap number
lap number
lap number
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elaspsed' time
'hyphen'
separator
'colon'
separator
1/10 second
1/10 second
1/10 second
1/10 second
hold
compass
start/stop
compass
5 seconds
start/stop
start/stop
To Record Lap Memory
- The Chronograph Mode allows you to record
lap memory (maximum 42 lap memories).
- Press the [compass] button once to record the lap
memory while the chronograph is running.
- The lap number will be flashing on the 1st row of the
display.
- The lap time is displayed on the 2nd row of
the display for 5 seconds, then it shows the 'elapse' time
since the [compass] button has been pressed.
- The accumulated 'elapse' time will be displayed on the 3rd
row of the display.
-While the lap number and lap time are displaying, the
chronograph keeps running.
- Repeat the steps mentioned above to get another set of
lap memory.
To Reset Lap Memory
- Press and hold the [compass] button for 2 seconds to reset
the lap memory in the Chronograph Mode while the
chronograph was stopped.
6.2 Chronograph Mode - Record Lap Time
CH
CH
CH
CH
the next recorded
lap memories
2nd lap
memory
the last recorded
lap memory
(max. 42 memory)
Lap Memory Recall Mode
- The lap number flashes in the 1st row of the
display; the 'REC' indicator will appear at the
same time.
- The 2nd row of the display shows the lap time of
the current lap memory: minute, second and 1/100
second.
- The 3rd row of the display shows the accumulated
'elapse' time: minute, second and 1/100
second.
To Recall Lap Memory
- Press the [start/stop] button to check the lap
memories through forward reviewing from lap 1 to
lap 42. Hold the [start/stop] button to change
lap memory at a higher speed.
- Press the [compass] button to check the lap
memories through backward reviewing from lap 42 to
lap 1. Hold the [compass] button to change lap
memory at a higher speed.
NOTE: Check the 'To Reset Lap Memory' section for lap
memory reset instructions.
NOTE: If the chronograph is running, the Lap Memory
Recall Mode will be reserved for the lap memory recording
and this mode can not be reviewed during this period of
time.
Lap Memory
Recall Mode
(1st Lap Memory)
Lap Memory Recall Sequence
start/stop
button
start/stop
button
start/stop
button
compass
button
compass
button
compass
button
lap time
accumulative
'elapse' time
lap number
7.0 Lap Memory Recall Mode - Recall Lap Time
9
10
11
12
REC
CH
CH
CH
CH
6.0 Chronograph Mode - Chronograph 'All Zero' Mode
6.1 Chronograph Mode - Start/Stop the Chronograph
Chronograph Mode
- The Chronograph measures elapsed times and lap times.
- The display shows the 'All Zeros' Mode if the
chronograph has been selected the first time or the
chronograph has been reset.
- The 1st row of the display shows the current lap number
of the chronograph.
- The 2nd row of the display shows the lap time: minute,
second and 1/100 second.
- The 3rd row of the display shows the accumulated
running time: minute, second and 1/100 second.
NOTE: if the accumulated time is long than 1 hour, the display
shows chronograph time in hour, minute and second instead
of minute, second and 1/100 second.
- The indicators around the display shows the
chronograph time in 1/10 second.
NOTE: The maximum counting range of the chronograph is 9
hours 59 minutes and 59 seconds, hence the chronograph
will count continuously until it counts to that value or the
[start/stop] button is pressed.
To Start/Stop the Chronograph
- When the chronograph is stopped, press the [start/stop]
button once to start the chronograph; press the
[start/stop] button once again to stop the chronograph.
- The elapsed time between the two 'start/stop'
keystrokes will be shown on 3rd row of the
display.
- Repeat the above steps to get the
accumulated time the chronograph is running.
*
To Reset the Chronograph
-To record a new set of elapsed time, press and hold
the [compass] button for 2 seconds to reset the
chronograph to 'All Zeros' display when the
chronograph is stopped.
NOTE: If you reset the chronograph, the lap memory will be
reset at the same time.
Chronograph
'all zero' Mode
Chronograph Mode
(chronograph time is
not longer than 1 hour)
Chronograph Mode
(Chronograph time is
longer than 1 hour)
Chronograph
'all zero' Mode
Chronograph
'Running' Mode
Chronograph
'Running' Mode
Chronograph
'Stop' Mode
Chronograph
'Lap' Mode
Chronograph
'Running' Mode
CH
CH
lap time
lap time
'elaspe' time
since the
[ ] button
has been pressed
compass
lap time
lap number
lap number
lap number
lap number
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elapsed' time
accumulative
'elaspsed' time
'hyphen'
separator
'colon'
separator
1/10 second
1/10 second
1/10 second
1/10 second
hold
compass
start/stop
compass
5 seconds
start/stop
start/stop
To Record Lap Memory
- The Chronograph Mode allows you to record
lap memory (maximum 42 lap memories).
- Press the [compass] button once to record the lap
memory while the chronograph is running.
- The lap number will be flashing on the 1st row of the
display.
- The lap time is displayed on the 2nd row of
the display for 5 seconds, then it shows the 'elapse' time
since the [compass] button has been pressed.
- The accumulated 'elapse' time will be displayed on the 3rd
row of the display.
-While the lap number and lap time are displaying, the
chronograph keeps running.
- Repeat the steps mentioned above to get another set of
lap memory.
To Reset Lap Memory
- Press and hold the [compass] button for 2 seconds to reset
the lap memory in the Chronograph Mode while the
chronograph was stopped.
6.2 Chronograph Mode - Record Lap Time
CH
CH
CH
CH
the next recorded
lap memories
2nd lap
memory
the last recorded
lap memory
(max. 42 memory)
Lap Memory Recall Mode
- The lap number flashes in the 1st row of the
display; the 'REC' indicator will appear at the
same time.
- The 2nd row of the display shows the lap time of
the current lap memory: minute, second and 1/100
second.
- The 3rd row of the display shows the accumulated
'elapse' time: minute, second and 1/100
second.
To Recall Lap Memory
- Press the [start/stop] button to check the lap
memories through forward reviewing from lap 1 to
lap 42. Hold the [start/stop] button to change
lap memory at a higher speed.
- Press the [compass] button to check the lap
memories through backward reviewing from lap 42 to
lap 1. Hold the [compass] button to change lap
memory at a higher speed.
NOTE: Check the 'To Reset Lap Memory' section for lap
memory reset instructions.
NOTE: If the chronograph is running, the Lap Memory
Recall Mode will be reserved for the lap memory recording
and this mode can not be reviewed during this period of
time.
Lap Memory
Recall Mode
(1st Lap Memory)
Lap Memory Recall Sequence
start/stop
button
start/stop
button
start/stop
button
compass
button
compass
button
compass
button
lap time
accumulative
'elapse' time
lap number
7.0 Lap Memory Recall Mode - Recall Lap Time
9
10
11
12
REC
Termékspecifikációk
| Márka: | La Crosse |
| Kategória: | óra |
| Modell: | XG-20 |
Szüksége van segítségre?
Ha segítségre van szüksége La Crosse XG-20, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók óra La Crosse
21 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
18 Augusztus 2024
10 Augusztus 2024
6 Augusztus 2024
6 Augusztus 2024
5 Augusztus 2024
3 Augusztus 2024
2 Augusztus 2024
Útmutatók óra
- óra Ikea
- óra Braun
- óra Nedis
- óra Oregon Scientific
- óra Garmin
- óra Lenovo
- óra Casio
- óra Auriol
- óra Emos
- óra Geemarc
- óra Camry
- óra Crivit
- óra Boss
- óra Omega
- óra Technaxx
- óra United Office
- óra Michael Kors
- óra Hama
- óra Renkforce
- óra Mitsubishi
- óra Techno Line
- óra Citizen
- óra Eta
- óra Trevi
- óra Fitbit
- óra Fisher Price
- óra Livoo
- óra Muse
- óra Suunto
- óra Pulsar
- óra ICE Watch
- óra Breitling
- óra Adidas
- óra Polar
- óra Tommy Hilfiger
- óra Kogan
- óra Alecto
- óra Velleman
- óra TFA
- óra McIntosh
- óra Eurochron
- óra Chacon
- óra Elro
- óra Jaguar
- óra Sempre
- óra TomTom
- óra Tissot
- óra Olympia
- óra Tronic
- óra Timex
- óra La Crosse Technology
- óra AKAI
- óra Konig
- óra GlobalTronics
- óra Pyle
- óra Alpina
- óra ECG
- óra Skmei
- óra Taylor
- óra Dormakaba
- óra Elation
- óra RCA
- óra Festina
- óra Beper
- óra Ascot
- óra Salter
- óra Topcom
- óra Fossil
- óra Lexon
- óra Vitek
- óra Zenith
- óra ART
- óra Fysic
- óra Ade
- óra Amplicom
- óra Accusplit
- óra Armani
- óra Invicta
- óra Alessi
- óra Lotus
- óra Lars Larsen
- óra Orient
- óra Jacques Lemans
- óra Calypso
- óra Bushnell
- óra Olivia Burton
- óra Victorinox
- óra Lambretta
- óra Tudor
- óra Holzkern
- óra Hublot
- óra Ebel
- óra Christopher Ward
- óra Edox
- óra Gc
- óra So & Co
- óra Diesel
- óra Karlsson
- óra Bulova
- óra Lorus
- óra Stuhrling
- óra Easypix
- óra Swatch
- óra Luminox
- óra Emporio Armani
- óra Cresta
- óra Girard-Perregaux
- óra Certina
- óra TMI
- óra Detomaso
- óra Skagen
- óra Profile
- óra Marquant
- óra Jacob Jensen
- óra Dugena
- óra Rolex
- óra Seiko
- óra Perel
- óra AcuRite
- óra Ventus
- óra Technoline
- óra AV:link
- óra TW Steel
- óra Timberland
- óra Spinnaker
- óra Pilgrim
- óra Audiovox
- óra Davis
- óra Valcom
- óra Hager
- óra Habitat
- óra Clas Ohlson
- óra Zuiver
- óra Irox
- óra ELYSEE
- óra Danish Design
- óra Daniel Steiger
- óra Torgoen
- óra WoodWatch
- óra Executive
- óra Nautica
- óra Christiaan Van Der Klaauw
- óra Klaus Kobec
- óra Obaku
- óra Hugo Boss
- óra Shinola
- óra Gira
- óra Jung
- óra Spin Master
- óra Tikkers
- óra Krontaler
- óra Balance
- óra Sinn
- óra Brera
- óra Dexford
- óra Lucien Picard
- óra Ranex
- óra Nike
- óra Swiza
- óra Mondaine
- óra IHome
- óra Slazenger
- óra Ticwatch
- óra Bering
- óra BBrain
- óra Leff
- óra DMC
- óra Lynx
- óra Maurice Lacroix
- óra Dakota
- óra Rado
- óra Puma
- óra Gant
- óra Tauchmeister
- óra Westfalia
- óra Just
- óra IWC
- óra Digi-tech
- óra Freestyle
- óra Global Tronics
- óra ASA
- óra Misfit
- óra Breo
- óra BML
- óra Inter-Quartz
- óra Haffstreuner
- óra TFA Dostmann
- óra Hamilton
- óra Kalenji
- óra Longines
- óra Junghans
- óra Meister Anker
- óra Lydion
- óra GC Watches
- óra Speedo
- óra Naitica
- óra TCM
- óra Uri Minkoff
- óra Guess
- óra Antelope Audio
- óra Equity
- óra Mebus
- óra Hermle
- óra ESQ
- óra DB Technologies
- óra ETT
- óra Triwa
- óra Raketa
- óra Balmain
- óra Focus Electrics
- óra Wonky Monkey
- óra Audemars Piguet
- óra Timer
- óra Pyramid
- óra Marc Jacobs
- óra Iron Annie
- óra Julie Julsen
- óra Xonix
- óra KRAEK
- óra World Timer Chronograph
- óra Ferrari
- óra X-WATCH
- óra Versace
- óra PAUL HEWITT
- óra Rodania
- óra Bruno Sohnle
- óra Naviforce
- óra Gingko
- óra Movado
- óra Lacoste
- óra MICHELE
- óra Philip Watch
- óra QQ
- óra Fila
- óra Ronda
- óra Weinberger
- óra TimeStyle
- óra CyberData Systems
- óra Radley London
- óra PANERAI
- óra Prologue
- óra Zeppelin
- óra Hype
- óra Electronics International
- óra HYT
- óra Antelope
- óra Grand Seiko
- óra Bearware
- óra Fromanteel
Legújabb útmutatók óra
30 Március 2025
26 Március 2025
26 Március 2025
23 Március 2025
23 Március 2025
23 Március 2025
23 Március 2025
23 Március 2025
23 Március 2025
23 Március 2025